Initially i2c_sda and i2c_scl are set to "-1" in wled.h. This can cause a bootloop when trying to initialize I2C with pins (-1, -1).
This fix ensures that usermod initialization will fail when SDA=-1 or SCL=-1.
A few goodies from my development branch, before I continue refactoring so much that I can't extracts nothing anymore.
- GEQ fades a bit slower
- updates to mic profiles
- simple peak detection without FFT (low freqs only)
- added "max used PSRAM" info
- moved all mem infos into one part
- only check PSRAM if BOARD_HAS_PSRAM
- oappend: debug message in case that stack buffer is too small.
Recent changes in mdev back to this branch
- devums to devmax
- Asyncwebserver to 2.0.7
- expressif updates
- new chips updates
- new warnings
esp32mdevmax
- activate 4ld, and rotary and 'hope' there are no conflicts with MPU6050 (sharing i2s bus)
This is a nice little chip info tool that I've created some time ago.
When building with `-D WLED_DEBUG`, it reports some interesting information about your ESP32 on serial monitor.
````
====================================
Chip info for ESP32-D0WDQ5
SDK: v4.4.1-472-gc9140caf8c
------------------------------------
XTAL FREQ: 40 MHz
APB FREQ: 80.0 MHz
CPU FREQ: 240 MHz
ESP32 DEVICE: ESP32-D0WD-V3 rev.3, 2 core(s), 240MHz.
Chip feature flags: 0b110010
* 0b0000010 Chip has 2.4GHz WiFi
* 0b0001000 Chip has Bluetooth LE
* 0b0010000 Chip has Bluetooth Classic
FLASH CHIP FREQ (magic): 80.0 MHz
FLASH SIZE (magic byte): 4.00 MB
FLASH MODE (magic byte): 2 ; 0=QIO, 1=QOUT, 2=DIO, 3=DOUT or other
FLASH CHIP ID: 0x16405E
FLASH CHIP FREQ: 80.0 MHz
FLASH REAL SIZE: 4.00 MB
FLASH REAL MODE: DIO
------------------------------------
RAM HEAP SIZE: 261.79 KB
FREE RAM: 232.57 KB
MAX RAM alloc: 107.99 KB
ESP32 PSRAM: found.
* SPI RAM Chip availeable: 64MBits = 8MBytes
total PSRAM: 4094 KB
FREE PSRAM: 4093.89 KB
MAX PSRAM alloc:4031.99 KB
used PSRAM: 0 Bytes
* PSRAM free after malloc / ps_malloc : 2833.85 KB
* Can allocate big memory with ps_malloc()
* Can allocate big memory with malloc()
CPU #0 - last reset reason = 1 POWERON_RESET => Vbat power on reset
CPU #1 - last reset reason = 14 EXT_CPU_RESET => APP CPU reset by PRO CPU
====================================
````
