Jan/WLED_MM_Infinity
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity
Files
f447bc64408ad1bd5b257ec532e75caaf23e2ebb
WLED_MM_Infinity/wled00/set.cpp
Frank f010adfe24 experimental: preview with gamma correction 
.... actually we undo gamma adjustments, because screens (laptop, pad, etc) will apply their own gamma corrections.

Activate in LED settings: "Use Gamma correction for preview"

Colors in WLED are sometimes gamma corrected, sometimes not. This change tries to make the best out of the color mess, but its still not working properly in all configurations.
2023-08-04 22:03:53 +02:00

1199 lines
44 KiB
C++
Raw Blame History

#include <Arduino.h> // WLEDMM: make sure that I2C drivers have the "right" Wire Object
#include <Wire.h>
#include "wled.h"
/*
* Receives client input
*/
//called upon POST settings form submit
void handleSettingsSet(AsyncWebServerRequest *request, byte subPage)
{
// PIN code request
if (subPage == 252)
{
correctPIN = (strlen(settingsPIN)==0 || strncmp(settingsPIN, request->arg(F("PIN")).c_str(), 4)==0);
lastEditTime = millis();
return;
}
//0: menu 1: wifi 2: leds 3: ui 4: sync 5: time 6: sec 7: DMX 8: usermods 9: N/A 10: 2D
if (subPage <1 || subPage >10 || !correctPIN) return;
// WLEDMM: before changing bus, ledmap, strip or 2D settings, make sure our strip is _not_ servicing effects in parallel
if ((subPage == 2) || (subPage == 3) || (subPage == 10)) {
suspendStripService = true; // temporarily lock out strip updates
if (strip.isServicing()) {
USER_PRINTLN(F("handleSettingsSet(): strip is still drawing effects."));
strip.waitUntilIdle();
}
}
//WIFI SETTINGS
if (subPage == 1)
{
strlcpy(clientSSID,request->arg(F("CS")).c_str(), 33);
if (!isAsterisksOnly(request->arg(F("CP")).c_str(), 65)) strlcpy(clientPass, request->arg(F("CP")).c_str(), 65);
strlcpy(cmDNS, request->arg(F("CM")).c_str(), 33);
apBehavior = request->arg(F("AB")).toInt();
strlcpy(apSSID, request->arg(F("AS")).c_str(), 33);
apHide = request->hasArg(F("AH"));
int passlen = request->arg(F("AP")).length();
if (passlen == 0 || (passlen > 7 && !isAsterisksOnly(request->arg(F("AP")).c_str(), 65))) strlcpy(apPass, request->arg(F("AP")).c_str(), 65);
int t = request->arg(F("AC")).toInt(); if (t > 0 && t < 14) apChannel = t;
noWifiSleep = request->hasArg(F("WS"));
#ifndef WLED_DISABLE_ESPNOW
enable_espnow_remote = request->hasArg(F("RE"));
strlcpy(linked_remote,request->arg(F("RMAC")).c_str(), 13);
//Normalize MAC format to lowercase
strlcpy(linked_remote,strlwr(linked_remote), 13);
#endif
#ifdef WLED_USE_ETHERNET
ethernetType = request->arg(F("ETH")).toInt();
WLED::instance().initEthernet();
#endif
char k[3]; k[2] = 0;
for (int i = 0; i<4; i++)
{
k[1] = i+48;//ascii 0,1,2,3
k[0] = 'I'; //static IP
staticIP[i] = request->arg(k).toInt();
k[0] = 'G'; //gateway
staticGateway[i] = request->arg(k).toInt();
k[0] = 'S'; //subnet
staticSubnet[i] = request->arg(k).toInt();
}
}
//LED SETTINGS
if (subPage == 2)
{
int t = 0;
if (rlyPin>=0 && pinManager.isPinAllocated(rlyPin, PinOwner::Relay)) {
pinManager.deallocatePin(rlyPin, PinOwner::Relay);
}
if (irPin>=0 && pinManager.isPinAllocated(irPin, PinOwner::IR)) {
pinManager.deallocatePin(irPin, PinOwner::IR);
}
for (uint8_t s=0; s<WLED_MAX_BUTTONS; s++) {
if (btnPin[s]>=0 && pinManager.isPinAllocated(btnPin[s], PinOwner::Button)) {
pinManager.deallocatePin(btnPin[s], PinOwner::Button);
}
}
uint8_t colorOrder, type, skip, awmode, channelSwap;
uint16_t length, start;
uint8_t pins[5] = {255, 255, 255, 255, 255};
autoSegments = request->hasArg(F("MS"));
correctWB = request->hasArg(F("CCT"));
cctFromRgb = request->hasArg(F("CR"));
strip.cctBlending = request->arg(F("CB")).toInt();
Bus::setCCTBlend(strip.cctBlending);
Bus::setGlobalAWMode(request->arg(F("AW")).toInt());
strip.setTargetFps(request->arg(F("FR")).toInt());
strip.useLedsArray = request->hasArg(F("LD"));
bool busesChanged = false;
for (uint8_t s = 0; s < WLED_MAX_BUSSES+WLED_MIN_VIRTUAL_BUSSES; s++) {
char lp[4] = "L0"; lp[2] = 48+s; lp[3] = 0; //ascii 0-9 //strip data pin
char lc[4] = "LC"; lc[2] = 48+s; lc[3] = 0; //strip length
char co[4] = "CO"; co[2] = 48+s; co[3] = 0; //strip color order
char lt[4] = "LT"; lt[2] = 48+s; lt[3] = 0; //strip type
char ls[4] = "LS"; ls[2] = 48+s; ls[3] = 0; //strip start LED
char cv[4] = "CV"; cv[2] = 48+s; cv[3] = 0; //strip reverse
char sl[4] = "SL"; sl[2] = 48+s; sl[3] = 0; //skip first N LEDs
char rf[4] = "RF"; rf[2] = 48+s; rf[3] = 0; //refresh required
char aw[4] = "AW"; aw[2] = 48+s; aw[3] = 0; //auto white mode
char wo[4] = "WO"; wo[2] = 48+s; wo[3] = 0; //channel swap
char sp[4] = "SP"; sp[2] = 48+s; sp[3] = 0; //bus clock speed (DotStar & PWM)
if (!request->hasArg(lp)) {
DEBUG_PRINT(F("No data for "));
DEBUG_PRINTLN(s);
break;
}
for (uint8_t i = 0; i < 5; i++) {
lp[1] = 48+i;
if (!request->hasArg(lp)) break;
pins[i] = (request->arg(lp).length() > 0) ? request->arg(lp).toInt() : 255;
}
type = request->arg(lt).toInt();
type |= request->hasArg(rf) << 7; // off refresh override
skip = request->arg(sl).toInt();
colorOrder = request->arg(co).toInt();
start = (request->hasArg(ls)) ? request->arg(ls).toInt() : t;
if (request->hasArg(lc) && request->arg(lc).toInt() > 0) {
t += length = request->arg(lc).toInt();
} else {
break; // no parameter
}
awmode = request->arg(aw).toInt();
uint16_t freqHz = request->arg(sp).toInt();
if (type > TYPE_ONOFF && type < 49) {
switch (freqHz) {
case 0 : freqHz = WLED_PWM_FREQ/3; break;
case 1 : freqHz = WLED_PWM_FREQ/2; break;
default:
case 2 : freqHz = WLED_PWM_FREQ; break;
case 3 : freqHz = WLED_PWM_FREQ*2; break;
case 4 : freqHz = WLED_PWM_FREQ*3; break;
}
} else if (type > 48 && type < 64) {
switch (freqHz) {
default:
case 0 : freqHz = 1000; break;
case 1 : freqHz = 2000; break;
case 2 : freqHz = 5000; break;
case 3 : freqHz = 10000; break;
case 4 : freqHz = 20000; break;
}
} else {
freqHz = 0;
}
channelSwap = (type == TYPE_SK6812_RGBW || type == TYPE_TM1814) ? request->arg(wo).toInt() : 0;
// actual finalization is done in WLED::loop() (removing old busses and adding new)
// this may happen even before this loop is finished so we do "doInitBusses" after the loop
if (busConfigs[s] != nullptr) delete busConfigs[s];
busConfigs[s] = new BusConfig(type, pins, start, length, colorOrder | (channelSwap<<4), request->hasArg(cv), skip, awmode, freqHz);
busesChanged = true;
}
//doInitBusses = busesChanged; // we will do that below to ensure all input data is processed
ColorOrderMap com = {};
for (uint8_t s = 0; s < WLED_MAX_COLOR_ORDER_MAPPINGS; s++) {
char xs[4] = "XS"; xs[2] = 48+s; xs[3] = 0; //start LED
char xc[4] = "XC"; xc[2] = 48+s; xc[3] = 0; //strip length
char xo[4] = "XO"; xo[2] = 48+s; xo[3] = 0; //color order
if (request->hasArg(xs)) {
start = request->arg(xs).toInt();
length = request->arg(xc).toInt();
colorOrder = request->arg(xo).toInt();
com.add(start, length, colorOrder);
}
}
busses.updateColorOrderMap(com);
// upate other pins
int hw_ir_pin = request->arg(F("IR")).toInt();
if (pinManager.allocatePin(hw_ir_pin,false, PinOwner::IR)) {
irPin = hw_ir_pin;
} else {
irPin = -1;
}
irEnabled = request->arg(F("IT")).toInt();
irApplyToAllSelected = !request->hasArg(F("MSO"));
int hw_rly_pin = request->arg(F("RL")).toInt();
if (pinManager.allocatePin(hw_rly_pin,true, PinOwner::Relay)) {
rlyPin = hw_rly_pin;
} else {
rlyPin = -1;
}
rlyMde = (bool)request->hasArg(F("RM"));
disablePullUp = (bool)request->hasArg(F("IP"));
for (uint8_t i=0; i<WLED_MAX_BUTTONS; i++) {
char bt[4] = "BT"; bt[2] = (i<10?48:55)+i; bt[3] = 0; // button pin (use A,B,C,... if WLED_MAX_BUTTONS>10)
char be[4] = "BE"; be[2] = (i<10?48:55)+i; be[3] = 0; // button type (use A,B,C,... if WLED_MAX_BUTTONS>10)
int hw_btn_pin = request->arg(bt).toInt();
if (pinManager.allocatePin(hw_btn_pin,false,PinOwner::Button)) {
btnPin[i] = hw_btn_pin;
buttonType[i] = request->arg(be).toInt();
#ifdef ARDUINO_ARCH_ESP32
// ESP32 only: check that analog button pin is a valid ADC gpio
if (((buttonType[i] == BTN_TYPE_ANALOG) || (buttonType[i] == BTN_TYPE_ANALOG_INVERTED)) && (digitalPinToAnalogChannel(btnPin[i]) < 0))
{
// not an ADC analog pin
if (btnPin[i] >= 0) USER_PRINTF("PIN ALLOC error: GPIO%d for analog button #%d is not an analog pin!\n", btnPin[i], i); // WLEDMM
btnPin[i] = -1;
pinManager.deallocatePin(hw_btn_pin,PinOwner::Button);
}
else
#endif
{
if (disablePullUp) {
pinMode(btnPin[i], INPUT);
} else {
#ifdef ESP32
pinMode(btnPin[i], buttonType[i]==BTN_TYPE_PUSH_ACT_HIGH ? INPUT_PULLDOWN : INPUT_PULLUP);
#else
pinMode(btnPin[i], INPUT_PULLUP);
#endif
}
}
} else {
btnPin[i] = -1;
buttonType[i] = BTN_TYPE_NONE;
}
}
touchThreshold = request->arg(F("TT")).toInt();
strip.ablMilliampsMax = request->arg(F("MA")).toInt();
strip.milliampsPerLed = request->arg(F("LA")).toInt();
briS = request->arg(F("CA")).toInt();
turnOnAtBoot = request->hasArg(F("BO"));
t = request->arg(F("BP")).toInt();
if (t <= 250) bootPreset = t;
gammaCorrectBri = request->hasArg(F("GB"));
gammaCorrectCol = request->hasArg(F("GC"));
gammaCorrectPreview = request->hasArg(F("GCP")); // WLEDMM
gammaCorrectVal = request->arg(F("GV")).toFloat();
if (gammaCorrectVal > 1.0f && gammaCorrectVal <= 3)
calcGammaTable(gammaCorrectVal);
else {
gammaCorrectVal = 1.0f; // no gamma correction
gammaCorrectBri = false;
gammaCorrectCol = false;
gammaCorrectPreview = false; // WLEDMM
}
fadeTransition = request->hasArg(F("TF"));
t = request->arg(F("TD")).toInt();
if (t >= 0) transitionDelayDefault = t;
strip.paletteFade = request->hasArg(F("PF"));
t = request->arg(F("TP")).toInt();
randomPaletteChangeTime = MIN(255,MAX(1,t));
nightlightTargetBri = request->arg(F("TB")).toInt();
t = request->arg(F("TL")).toInt();
if (t > 0) nightlightDelayMinsDefault = t;
nightlightDelayMins = nightlightDelayMinsDefault;
nightlightMode = request->arg(F("TW")).toInt();
t = request->arg(F("PB")).toInt();
if (t >= 0 && t < 4) strip.paletteBlend = t;
t = request->arg(F("BF")).toInt();
if (t > 0) briMultiplier = t;
doInitBusses = busesChanged;
}
//UI
if (subPage == 3)
{
strlcpy(serverDescription, request->arg(F("DS")).c_str(), 33);
syncToggleReceive = request->hasArg(F("ST"));
#ifdef WLED_ENABLE_SIMPLE_UI
if (simplifiedUI ^ request->hasArg(F("SU"))) {
// UI selection changed, invalidate browser cache
cacheInvalidate++;
}
simplifiedUI = request->hasArg(F("SU"));
#endif
DEBUG_PRINTLN(F("Enumerating ledmaps"));
strip.enumerateLedmaps();
DEBUG_PRINTLN(F("Loading custom palettes"));
strip.loadCustomPalettes(); // (re)load all custom palettes
}
//SYNC
if (subPage == 4)
{
int t = request->arg(F("UP")).toInt();
if (t > 0) udpPort = t;
t = request->arg(F("U2")).toInt();
if (t > 0) udpPort2 = t;
syncGroups = request->arg(F("GS")).toInt();
receiveGroups = request->arg(F("GR")).toInt();
receiveNotificationBrightness = request->hasArg(F("RB"));
receiveNotificationColor = request->hasArg(F("RC"));
receiveNotificationEffects = request->hasArg(F("RX"));
receiveSegmentOptions = request->hasArg(F("SO"));
receiveSegmentBounds = request->hasArg(F("SG"));
receiveNotifications = (receiveNotificationBrightness || receiveNotificationColor || receiveNotificationEffects || receiveSegmentOptions);
notifyDirectDefault = request->hasArg(F("SD"));
notifyDirect = notifyDirectDefault;
notifyButton = request->hasArg(F("SB"));
notifyAlexa = request->hasArg(F("SA"));
notifyHue = request->hasArg(F("SH"));
notifyMacro = request->hasArg(F("SM"));
t = request->arg(F("UR")).toInt();
if ((t>=0) && (t<30)) udpNumRetries = t;
nodeListEnabled = request->hasArg(F("NL"));
if (!nodeListEnabled) Nodes.clear();
nodeBroadcastEnabled = request->hasArg(F("NB"));
receiveDirect = request->hasArg(F("RD"));
useMainSegmentOnly = request->hasArg(F("MO"));
e131SkipOutOfSequence = request->hasArg(F("ES"));
e131Multicast = request->hasArg(F("EM"));
t = request->arg(F("EP")).toInt();
if (t > 0) e131Port = t;
t = request->arg(F("EU")).toInt();
if (t >= 0 && t <= 63999) e131Universe = t;
t = request->arg(F("DA")).toInt();
if (t >= 0 && t <= 510) DMXAddress = t;
t = request->arg(F("XX")).toInt();
if (t >= 0 && t <= 150) DMXSegmentSpacing = t;
t = request->arg(F("PY")).toInt();
if (t >= 0 && t <= 200) e131Priority = t;
t = request->arg(F("DM")).toInt();
if (t >= DMX_MODE_DISABLED && t <= DMX_MODE_PRESET) DMXMode = t;
t = request->arg(F("ET")).toInt();
if (t > 99 && t <= 65000) realtimeTimeoutMs = t;
arlsForceMaxBri = request->hasArg(F("FB"));
arlsDisableGammaCorrection = request->hasArg(F("RG"));
t = request->arg(F("WO")).toInt();
if (t >= -255 && t <= 255) arlsOffset = t;
#ifdef WLED_ENABLE_DMX_INPUT
dmxTransmitPin = request->arg(F("DMT")).toInt();
dmxReceivePin = request->arg(F("DMR")).toInt();
dmxEnablePin= request->arg(F("DME")).toInt();
#endif
alexaEnabled = request->hasArg(F("AL"));
strlcpy(alexaInvocationName, request->arg(F("AI")).c_str(), 33);
t = request->arg(F("AP")).toInt();
if (t >= 0 && t <= 9) alexaNumPresets = t;
#ifdef WLED_ENABLE_MQTT
mqttEnabled = request->hasArg(F("MQ"));
strlcpy(mqttServer, request->arg(F("MS")).c_str(), 33);
t = request->arg(F("MQPORT")).toInt();
if (t > 0) mqttPort = t;
strlcpy(mqttUser, request->arg(F("MQUSER")).c_str(), 41);
if (!isAsterisksOnly(request->arg(F("MQPASS")).c_str(), 41)) strlcpy(mqttPass, request->arg(F("MQPASS")).c_str(), 65);
strlcpy(mqttClientID, request->arg(F("MQCID")).c_str(), 41);
strlcpy(mqttDeviceTopic, request->arg(F("MD")).c_str(), 33);
strlcpy(mqttGroupTopic, request->arg(F("MG")).c_str(), 33);
buttonPublishMqtt = request->hasArg(F("BM"));
retainMqttMsg = request->hasArg(F("RT"));
#endif
#ifndef WLED_DISABLE_HUESYNC
for (int i=0;i<4;i++){
String a = "H"+String(i);
hueIP[i] = request->arg(a).toInt();
}
t = request->arg(F("HL")).toInt();
if (t > 0) huePollLightId = t;
t = request->arg(F("HI")).toInt();
if (t > 50) huePollIntervalMs = t;
hueApplyOnOff = request->hasArg(F("HO"));
hueApplyBri = request->hasArg(F("HB"));
hueApplyColor = request->hasArg(F("HC"));
huePollingEnabled = request->hasArg(F("HP"));
hueStoreAllowed = true;
reconnectHue();
#endif
//WLEDMM: add netdebug variables
#ifdef WLED_DEBUG_HOST
for (int i=0;i<4;i++){
String a = "N"+String(i);
netDebugPrintIP[i] = request->arg(a).toInt();
}
netDebugPrintPort = request->arg("NP").toInt();
#endif
t = request->arg(F("BD")).toInt();
if (t >= 96 && t <= 15000) serialBaud = t;
updateBaudRate(serialBaud *100);
}
//TIME
if (subPage == 5)
{
ntpEnabled = request->hasArg(F("NT"));
strlcpy(ntpServerName, request->arg(F("NS")).c_str(), 33);
useAMPM = !request->hasArg(F("CF"));
currentTimezone = request->arg(F("TZ")).toInt();
utcOffsetSecs = request->arg(F("UO")).toInt();
//start ntp if not already connected
if (ntpEnabled && WLED_CONNECTED && !ntpConnected) ntpConnected = ntpUdp.begin(ntpLocalPort);
ntpLastSyncTime = 0; // force new NTP query
longitude = request->arg(F("LN")).toFloat();
latitude = request->arg(F("LT")).toFloat();
// force a sunrise/sunset re-calculation
calculateSunriseAndSunset();
overlayCurrent = request->hasArg(F("OL")) ? 1 : 0;
overlayMin = request->arg(F("O1")).toInt();
overlayMax = request->arg(F("O2")).toInt();
analogClock12pixel = request->arg(F("OM")).toInt();
analogClock5MinuteMarks = request->hasArg(F("O5"));
analogClockSecondsTrail = request->hasArg(F("OS"));
countdownMode = request->hasArg(F("CE"));
countdownYear = request->arg(F("CY")).toInt();
countdownMonth = request->arg(F("CI")).toInt();
countdownDay = request->arg(F("CD")).toInt();
countdownHour = request->arg(F("CH")).toInt();
countdownMin = request->arg(F("CM")).toInt();
countdownSec = request->arg(F("CS")).toInt();
setCountdown();
macroAlexaOn = request->arg(F("A0")).toInt();
macroAlexaOff = request->arg(F("A1")).toInt();
macroCountdown = request->arg(F("MC")).toInt();
macroNl = request->arg(F("MN")).toInt();
for (uint8_t i=0; i<WLED_MAX_BUTTONS; i++) {
char mp[4] = "MP"; mp[2] = (i<10?48:55)+i; mp[3] = 0; // short
char ml[4] = "ML"; ml[2] = (i<10?48:55)+i; ml[3] = 0; // long
char md[4] = "MD"; md[2] = (i<10?48:55)+i; md[3] = 0; // double
//if (!request->hasArg(mp)) break;
macroButton[i] = request->arg(mp).toInt(); // these will default to 0 if not present
macroLongPress[i] = request->arg(ml).toInt();
macroDoublePress[i] = request->arg(md).toInt();
}
char k[3]; k[2] = 0;
for (int i = 0; i<10; i++) {
k[1] = i+48;//ascii 0,1,2,3,...
k[0] = 'H'; //timer hours
timerHours[i] = request->arg(k).toInt();
k[0] = 'N'; //minutes
timerMinutes[i] = request->arg(k).toInt();
k[0] = 'T'; //macros
timerMacro[i] = request->arg(k).toInt();
k[0] = 'W'; //weekdays
timerWeekday[i] = request->arg(k).toInt();
if (i<8) {
k[0] = 'M'; //start month
timerMonth[i] = request->arg(k).toInt() & 0x0F;
timerMonth[i] <<= 4;
k[0] = 'P'; //end month
timerMonth[i] += (request->arg(k).toInt() & 0x0F);
k[0] = 'D'; //start day
timerDay[i] = request->arg(k).toInt();
k[0] = 'E'; //end day
timerDayEnd[i] = request->arg(k).toInt();
}
}
}
//SECURITY
if (subPage == 6)
{
if (request->hasArg(F("RS"))) //complete factory reset
{
WLED_FS.format();
#ifdef WLED_ADD_EEPROM_SUPPORT
clearEEPROM();
#endif
serveMessage(request, 200, F("All Settings erased."), F("Connect to WLED-AP to setup again"),255);
doReboot = true;
}
if (request->hasArg(F("PIN"))) {
const char *pin = request->arg(F("PIN")).c_str();
uint8_t pinLen = strlen(pin);
if (pinLen == 4 || pinLen == 0) {
uint8_t numZeros = 0;
for (uint8_t i = 0; i < pinLen; i++) numZeros += (pin[i] == '0');
if (numZeros < pinLen || pinLen == 0) { // ignore 0000 input (placeholder)
strlcpy(settingsPIN, pin, 5);
}
settingsPIN[4] = 0;
}
}
bool pwdCorrect = !otaLock; //always allow access if ota not locked
if (request->hasArg(F("OP")))
{
if (otaLock && strcmp(otaPass,request->arg(F("OP")).c_str()) == 0)
{
// brute force protection: do not unlock even if correct if last save was less than 3 seconds ago
if (millis() - lastEditTime > 3000) pwdCorrect = true;
}
if (!otaLock && request->arg(F("OP")).length() > 0)
{
strlcpy(otaPass,request->arg(F("OP")).c_str(), 33); // set new OTA password
}
}
if (pwdCorrect) //allow changes if correct pwd or no ota active
{
otaLock = request->hasArg(F("NO"));
wifiLock = request->hasArg(F("OW"));
aOtaEnabled = request->hasArg(F("AO"));
//createEditHandler(correctPIN && !otaLock);
}
}
#ifdef WLED_ENABLE_DMX // include only if DMX is enabled
if (subPage == 7)
{
int t = request->arg(F("PU")).toInt();
if (t >= 0 && t <= 63999) e131ProxyUniverse = t;
t = request->arg(F("CN")).toInt();
if (t>0 && t<16) {
DMXChannels = t;
}
t = request->arg(F("CS")).toInt();
if (t>0 && t<513) {
DMXStart = t;
}
t = request->arg(F("CG")).toInt();
if (t>0 && t<513) {
DMXGap = t;
}
t = request->arg(F("SL")).toInt();
if (t>=0 && t < MAX_LEDS) {
DMXStartLED = t;
}
for (int i=0; i<15; i++) {
String argname = "CH" + String((i+1));
t = request->arg(argname).toInt();
DMXFixtureMap[i] = t;
}
}
#endif
//USERMODS
if (subPage == 8)
{
if (!requestJSONBufferLock(5)) return;
// global I2C & SPI pins
int8_t hw_sda_pin = -2;//!request->arg(F("SDApin")).length() ? -1 : (int)request->arg(F("SDApin")).toInt(); // WLEDMM: -2 = no value
int8_t hw_scl_pin = -2;//!request->arg(F("SCLpin")).length() ? -1 : (int)request->arg(F("SCLpin")).toInt(); // WLEDMM: -2 = no value
int8_t hw_mosi_pin = -2;//!request->arg(F("MOSIpin")).length() ? -1 : (int)request->arg(F("MOSIpin")).toInt();
int8_t hw_miso_pin = -2;//!request->arg(F("MISOpin")).length() ? -1 : (int)request->arg(F("MISOpin")).toInt();
int8_t hw_sclk_pin = -2;//!request->arg(F("SCLKpin")).length() ? -1 : (int)request->arg(F("SCLKpin")).toInt();
//WLEDMM: :pin values have 2 occurrences: the type and the value, we need the value
int paramsNr = request->params();
AsyncWebParameter* p_prev = nullptr;
for (int i=0;i<paramsNr;i++) {
AsyncWebParameter* p = request->getParam(i);
if (p_prev != nullptr && p->name() == p_prev->name())
{
if (p->name() == "if:SDA:pin") hw_sda_pin = p->value().toInt();
if (p->name() == "if:SCL:pin") hw_scl_pin = p->value().toInt();
if (p->name() == "if:MOSI:pin") hw_mosi_pin = p->value().toInt();
if (p->name() == "if:MISO:pin") hw_miso_pin = p->value().toInt();
if (p->name() == "if:SCLK:pin") hw_sclk_pin = p->value().toInt();
}
p_prev = p;
}
#ifdef ESP8266
// cannot change pins on ESP8266 --> actually we can
// WLEDMM: HW_PIN_xx could be set to -1 --> use pins as defined by the framework! SDA = 4, SCL = 5
//if (hw_sda_pin >= 0 && hw_sda_pin != 4) hw_sda_pin = 4;
//if (hw_scl_pin >= 0 && hw_scl_pin != 5) hw_scl_pin = 5;
#endif
PinManagerPinType i2c[2] = { { hw_sda_pin, true }, { hw_scl_pin, true } };
if (hw_sda_pin >= 0 && hw_scl_pin >= 0 && pinManager.allocateMultiplePins(i2c, 2, PinOwner::HW_I2C)) {
i2c_sda = hw_sda_pin;
i2c_scl = hw_scl_pin;
DEBUG_PRINTF("handleSettingsSet(): reserved I2C pins SDA=%d SCL=%d.\n", i2c_sda, i2c_scl);
#ifdef ESP32
Wire.setPins(i2c_sda, i2c_scl); // this will fail if Wire is initilised (Wire.begin() called)
#endif
// Wire.begin(); // WLEDMM moved into pinManager
} else {
// there is no Wire.end()
if (hw_sda_pin == -1 || hw_scl_pin == -1) { // WLEDMM bugfix allow pin = -1
i2c_sda = -1;
i2c_scl = -1;
DEBUG_PRINTLN(F("handleSettingsSet(): reset I2C pins to -1"));
}
DEBUG_PRINTLN(F("handleSettingsSet(): Could not allocate I2C pins - deallocating."));
uint8_t i2c[2] = { static_cast<uint8_t>(i2c_scl), static_cast<uint8_t>(i2c_sda) };
pinManager.deallocateMultiplePins(i2c, 2, PinOwner::HW_I2C); // just in case deallocation of old pins
DEBUG_PRINTF("pinmgr not success for global i2c %d %d\n", i2c_sda, i2c_scl);
}
#ifdef ESP8266
// cannot change pins on ESP8266
if (hw_mosi_pin >= 0 && hw_mosi_pin != HW_PIN_MOSISPI) hw_mosi_pin = HW_PIN_MOSISPI; //WLEDMM renamed from HW_PIN_DATASPI
if (hw_miso_pin >= 0 && hw_miso_pin != HW_PIN_MISOSPI) hw_mosi_pin = HW_PIN_MISOSPI;
if (hw_sclk_pin >= 0 && hw_sclk_pin != HW_PIN_CLOCKSPI) hw_sclk_pin = HW_PIN_CLOCKSPI;
#endif
PinManagerPinType spi[3] = { { hw_mosi_pin, true }, { hw_miso_pin, true }, { hw_sclk_pin, true } };
if (hw_mosi_pin >= 0 && hw_sclk_pin >= 0 && pinManager.allocateMultiplePins(spi, 3, PinOwner::HW_SPI)) {
spi_mosi = hw_mosi_pin;
spi_miso = hw_miso_pin;
spi_sclk = hw_sclk_pin;
// no bus re-initialisation as usermods do not get any notification
//SPI.end();
#ifdef ESP32
//SPI.begin(spi_sclk, spi_miso, spi_mosi);
#else
//SPI.begin();
#endif
} else {
//SPI.end();
if (hw_mosi_pin == -1 || hw_sclk_pin == -1) { // WLEDMM bugfix allow pin = -1
spi_mosi = hw_mosi_pin;
spi_miso = hw_miso_pin;
spi_sclk = hw_sclk_pin;
}
DEBUG_PRINTLN(F("Could not allocate SPI pins."));
uint8_t spi[3] = { static_cast<uint8_t>(spi_mosi), static_cast<uint8_t>(spi_miso), static_cast<uint8_t>(spi_sclk) };
pinManager.deallocateMultiplePins(spi, 3, PinOwner::HW_SPI); // just in case deallocation of old pins
DEBUG_PRINTF("pinmgr not success for global spi %d %d %d\n", spi_mosi, spi_miso, spi_sclk);
}
JsonObject um = doc.createNestedObject("um");
size_t args = request->args();
uint16_t j=0;
for (size_t i=0; i<args; i++) {
String name = request->argName(i);
String value = request->arg(i);
// POST request parameters are combined as <usermodname>_<usermodparameter>
int umNameEnd = name.indexOf(":");
if (umNameEnd<1) continue; // parameter does not contain ":" or on 1st place -> wrong
JsonObject mod = um[name.substring(0,umNameEnd)]; // get a usermod JSON object
if (mod.isNull()) {
mod = um.createNestedObject(name.substring(0,umNameEnd)); // if it does not exist create it
}
DEBUG_PRINT(name.substring(0,umNameEnd));
DEBUG_PRINT(":");
name = name.substring(umNameEnd+1); // remove mod name from string
// if the resulting name still contains ":" this means nested object
JsonObject subObj;
int umSubObj = name.indexOf(":");
DEBUG_PRINTF("(%d):",umSubObj);
if (umSubObj>0) {
subObj = mod[name.substring(0,umSubObj)];
if (subObj.isNull())
subObj = mod.createNestedObject(name.substring(0,umSubObj));
name = name.substring(umSubObj+1); // remove nested object name from string
} else {
subObj = mod;
}
DEBUG_PRINT(name);
// check if parameters represent array
if (name.endsWith("[]")) {
name.replace("[]","");
value.replace(",","."); // just in case conversion
if (!subObj[name].is<JsonArray>()) {
JsonArray ar = subObj.createNestedArray(name);
if (value.indexOf(".") >= 0) ar.add(value.toFloat()); // we do have a float
else ar.add(value.toInt()); // we may have an int
j=0;
} else {
if (value.indexOf(".") >= 0) subObj[name].add(value.toFloat()); // we do have a float
else subObj[name].add(value.toInt()); // we may have an int
j++;
}
DEBUG_PRINT("[");
DEBUG_PRINT(j);
DEBUG_PRINT("] = ");
DEBUG_PRINTLN(value);
} else {
// we are using a hidden field with the same name as our parameter (!before the actual parameter!)
// to describe the type of parameter (text,float,int), for boolean patameters the first field contains "off"
// so checkboxes have one or two fields (first is always "false", existence of second depends on checkmark and may be "true")
if (subObj[name].isNull()) {
// the first occurence of the field describes the parameter type (used in next loop)
if (value == "false") subObj[name] = false; // checkboxes may have only one field
else subObj[name] = value;
} else {
String type = subObj[name].as<String>(); // get previously stored value as a type
if (subObj[name].is<bool>()) subObj[name] = true; // checkbox/boolean
else if (type == "number") {
value.replace(",","."); // just in case conversion
if (value.indexOf(".") >= 0) subObj[name] = value.toFloat(); // we do have a float
else subObj[name] = value.toInt(); // we may have an int
} else if (type == "int") subObj[name] = value.toInt();
else subObj[name] = value; // text fields
}
DEBUG_PRINT(" = ");
DEBUG_PRINTLN(value);
}
}
usermods.readFromConfig(um); // force change of usermod parameters
DEBUG_PRINTLN(F("Done re-init usermods."));
releaseJSONBufferLock();
}
#ifndef WLED_DISABLE_2D
//2D panels
if (subPage == 10)
{
strip.isMatrix = request->arg(F("SOMP")).toInt();
strip.panel.clear(); // release memory if allocated
if (strip.isMatrix) {
strip.panels = MAX(1,MIN(WLED_MAX_PANELS,request->arg(F("MPC")).toInt()));
//WLEDMM: keep storing basic 2d setup
strip.bOrA = request->arg(F("BA")).toInt(); //WLEDMM basic or advanced
strip.panelsH = request->arg(F("MPH")).toInt();
strip.panelsV = request->arg(F("MPV")).toInt();
strip.matrix.bottomStart = request->arg(F("PB")).toInt();
strip.matrix.rightStart = request->arg(F("PR")).toInt();
strip.matrix.vertical = request->arg(F("PV")).toInt();
strip.matrix.serpentine = request->hasArg(F("PS"));
strip.panelO.bottomStart = request->arg(F("PBL")).toInt();
strip.panelO.rightStart = request->arg(F("PRL")).toInt();
strip.panelO.vertical = request->arg(F("PVL")).toInt();
strip.panelO.serpentine = request->hasArg(F("PSL"));
strip.panel.reserve(strip.panels); // pre-allocate memory
for (uint8_t i=0; i<strip.panels; i++) {
WS2812FX::Panel p;
char pO[8] = { '\0' };
snprintf_P(pO, 7, PSTR("P%d"), i); // MAX_PANELS is 64 so pO will always only be 4 characters or less
pO[7] = '\0';
uint8_t l = strlen(pO);
// create P0B, P1B, ..., P63B, etc for other PxxX
pO[l] = 'B'; if (!request->hasArg(pO)) break;
pO[l] = 'B'; p.bottomStart = request->arg(pO).toInt();
pO[l] = 'R'; p.rightStart = request->arg(pO).toInt();
pO[l] = 'V'; p.vertical = request->arg(pO).toInt();
pO[l] = 'S'; p.serpentine = request->hasArg(pO);
pO[l] = 'X'; p.xOffset = request->arg(pO).toInt();
pO[l] = 'Y'; p.yOffset = request->arg(pO).toInt();
pO[l] = 'W'; p.width = request->arg(pO).toInt();
pO[l] = 'H'; p.height = request->arg(pO).toInt();
strip.panel.push_back(p);
}
strip.setUpMatrix(); // will check limits
strip.resetSegments(true); //WLEDMM not makeAutoSegments(true) as we only want to change bounds
strip.deserializeMap();
} else {
Segment::maxWidth = strip.getLengthTotal();
Segment::maxHeight = 1;
}
}
#endif
if ((subPage == 2) || (subPage == 3) || (subPage == 10)) {
suspendStripService = false; // WLEDMM release lock
}
lastEditTime = millis();
if (subPage != 2 && !doReboot) doSerializeConfig = true; //serializeConfig(); //do not save if factory reset or LED settings (which are saved after LED re-init)
#ifndef WLED_DISABLE_ALEXA
if (subPage == 4) alexaInit();
#endif
}
//HTTP API request parser
bool handleSet(AsyncWebServerRequest *request, const String& req, bool apply)
{
if (!(req.indexOf("win") >= 0)) return false;
int pos = 0;
DEBUG_PRINT(F("API req: "));
DEBUG_PRINTLN(req);
//segment select (sets main segment)
pos = req.indexOf(F("SM="));
if (pos > 0 && !realtimeMode) {
strip.setMainSegmentId(getNumVal(&req, pos));
}
byte selectedSeg = strip.getFirstSelectedSegId();
bool singleSegment = false;
pos = req.indexOf(F("SS="));
if (pos > 0) {
byte t = getNumVal(&req, pos);
if (t < strip.getSegmentsNum()) {
selectedSeg = t;
singleSegment = true;
}
}
// WLEDMM: before changing segment settings, make sure our strip is _not_ servicing effects in parallel
if (strip.isServicing()) {
USER_PRINTLN(F("handleSet(): strip is still drawing effects."));
strip.waitUntilIdle();
}
Segment& selseg = strip.getSegment(selectedSeg);
pos = req.indexOf(F("SV=")); //segment selected
if (pos > 0) {
byte t = getNumVal(&req, pos);
if (t == 2) for (uint8_t i = 0; i < strip.getSegmentsNum(); i++) strip.getSegment(i).selected = false; // unselect other segments
selseg.selected = t;
}
// temporary values, write directly to segments, globals are updated by setValuesFromFirstSelectedSeg()
uint32_t col0 = selseg.colors[0];
uint32_t col1 = selseg.colors[1];
byte colIn[4] = {R(col0), G(col0), B(col0), W(col0)};
byte colInSec[4] = {R(col1), G(col1), B(col1), W(col1)};
byte effectIn = selseg.mode;
byte speedIn = selseg.speed;
byte intensityIn = selseg.intensity;
byte paletteIn = selseg.palette;
byte custom1In = selseg.custom1;
byte custom2In = selseg.custom2;
byte custom3In = selseg.custom3;
byte check1In = selseg.check1;
byte check2In = selseg.check2;
byte check3In = selseg.check3;
uint16_t startI = selseg.start;
uint16_t stopI = selseg.stop;
uint16_t startY = selseg.startY;
uint16_t stopY = selseg.stopY;
uint8_t grpI = selseg.grouping;
uint16_t spcI = selseg.spacing;
pos = req.indexOf(F("&S=")); //segment start
if (pos > 0) {
startI = getNumVal(&req, pos);
}
pos = req.indexOf(F("S2=")); //segment stop
if (pos > 0) {
stopI = getNumVal(&req, pos);
}
pos = req.indexOf(F("GP=")); //segment grouping
if (pos > 0) {
grpI = getNumVal(&req, pos);
if (grpI == 0) grpI = 1;
}
pos = req.indexOf(F("SP=")); //segment spacing
if (pos > 0) {
spcI = getNumVal(&req, pos);
}
selseg.setUp(startI, stopI, grpI, spcI, UINT16_MAX, startY, stopY);
pos = req.indexOf(F("RV=")); //Segment reverse
if (pos > 0) selseg.reverse = req.charAt(pos+3) != '0';
pos = req.indexOf(F("MI=")); //Segment mirror
if (pos > 0) selseg.mirror = req.charAt(pos+3) != '0';
pos = req.indexOf(F("SB=")); //Segment brightness/opacity
if (pos > 0) {
byte segbri = getNumVal(&req, pos);
selseg.setOption(SEG_OPTION_ON, segbri); // use transition
if (segbri) {
selseg.setOpacity(segbri);
}
}
pos = req.indexOf(F("SW=")); //segment power
if (pos > 0) {
switch (getNumVal(&req, pos)) {
case 0: selseg.setOption(SEG_OPTION_ON, false); break; // use transition
case 1: selseg.setOption(SEG_OPTION_ON, true); break; // use transition
default: selseg.setOption(SEG_OPTION_ON, !selseg.on); break; // use transition
}
}
pos = req.indexOf(F("PS=")); //saves current in preset
if (pos > 0) savePreset(getNumVal(&req, pos));
pos = req.indexOf(F("P1=")); //sets first preset for cycle
if (pos > 0) presetCycMin = getNumVal(&req, pos);
pos = req.indexOf(F("P2=")); //sets last preset for cycle
if (pos > 0) presetCycMax = getNumVal(&req, pos);
//apply preset
if (updateVal(req.c_str(), "PL=", &presetCycCurr, presetCycMin, presetCycMax)) {
unloadPlaylist();
applyPreset(presetCycCurr);
}
//set brightness
updateVal(req.c_str(), "&A=", &bri);
bool col0Changed = false, col1Changed = false;
//set colors
col0Changed |= updateVal(req.c_str(), "&R=", &colIn[0]);
col0Changed |= updateVal(req.c_str(), "&G=", &colIn[1]);
col0Changed |= updateVal(req.c_str(), "&B=", &colIn[2]);
col0Changed |= updateVal(req.c_str(), "&W=", &colIn[3]);
col1Changed |= updateVal(req.c_str(), "R2=", &colInSec[0]);
col1Changed |= updateVal(req.c_str(), "G2=", &colInSec[1]);
col1Changed |= updateVal(req.c_str(), "B2=", &colInSec[2]);
col1Changed |= updateVal(req.c_str(), "W2=", &colInSec[3]);
#ifdef WLED_ENABLE_LOXONE
//lox parser
pos = req.indexOf(F("LX=")); // Lox primary color
if (pos > 0) {
int lxValue = getNumVal(&req, pos);
if (parseLx(lxValue, colIn)) {
bri = 255;
nightlightActive = false; //always disable nightlight when toggling
col0Changed = true;
}
}
pos = req.indexOf(F("LY=")); // Lox secondary color
if (pos > 0) {
int lxValue = getNumVal(&req, pos);
if(parseLx(lxValue, colInSec)) {
bri = 255;
nightlightActive = false; //always disable nightlight when toggling
col1Changed = true;
}
}
#endif
//set hue
pos = req.indexOf(F("HU="));
if (pos > 0) {
uint16_t temphue = getNumVal(&req, pos);
byte tempsat = 255;
pos = req.indexOf(F("SA="));
if (pos > 0) {
tempsat = getNumVal(&req, pos);
}
byte sec = req.indexOf(F("H2"));
colorHStoRGB(temphue, tempsat, (sec>0) ? colInSec : colIn);
col0Changed |= (!sec); col1Changed |= sec;
}
//set white spectrum (kelvin)
pos = req.indexOf(F("&K="));
if (pos > 0) {
byte sec = req.indexOf(F("K2"));
colorKtoRGB(getNumVal(&req, pos), (sec>0) ? colInSec : colIn);
col0Changed |= (!sec); col1Changed |= sec;
}
//set color from HEX or 32bit DEC
byte tmpCol[4];
pos = req.indexOf(F("CL="));
if (pos > 0) {
colorFromDecOrHexString(colIn, (char*)req.substring(pos + 3).c_str());
col0Changed = true;
}
pos = req.indexOf(F("C2="));
if (pos > 0) {
colorFromDecOrHexString(colInSec, (char*)req.substring(pos + 3).c_str());
col1Changed = true;
}
pos = req.indexOf(F("C3="));
if (pos > 0) {
colorFromDecOrHexString(tmpCol, (char*)req.substring(pos + 3).c_str());
uint32_t col2 = RGBW32(tmpCol[0], tmpCol[1], tmpCol[2], tmpCol[3]);
selseg.setColor(2, col2); // defined above (SS= or main)
if (!singleSegment) strip.setColor(2, col2); // will set color to all active & selected segments
}
//set to random hue SR=0->1st SR=1->2nd
pos = req.indexOf(F("SR"));
if (pos > 0) {
byte sec = getNumVal(&req, pos);
setRandomColor(sec? colInSec : colIn);
col0Changed |= (!sec); col1Changed |= sec;
}
//swap 2nd & 1st
pos = req.indexOf(F("SC"));
if (pos > 0) {
byte temp;
for (uint8_t i=0; i<4; i++) {
temp = colIn[i];
colIn[i] = colInSec[i];
colInSec[i] = temp;
}
col0Changed = col1Changed = true;
}
// apply colors to selected segment, and all selected segments if applicable
if (col0Changed) {
uint32_t colIn0 = RGBW32(colIn[0], colIn[1], colIn[2], colIn[3]);
selseg.setColor(0, colIn0);
if (!singleSegment) strip.setColor(0, colIn0); // will set color to all active & selected segments
}
if (col1Changed) {
uint32_t colIn1 = RGBW32(colInSec[0], colInSec[1], colInSec[2], colInSec[3]);
selseg.setColor(1, colIn1);
if (!singleSegment) strip.setColor(1, colIn1); // will set color to all active & selected segments
}
bool fxModeChanged = false, speedChanged = false, intensityChanged = false, paletteChanged = false;
bool custom1Changed = false, custom2Changed = false, custom3Changed = false, check1Changed = false, check2Changed = false, check3Changed = false;
// set effect parameters
if (updateVal(req.c_str(), "FX=", &effectIn, 0, strip.getModeCount()-1)) {
if (request != nullptr) unloadPlaylist(); // unload playlist if changing FX using web request
fxModeChanged = true;
}
speedChanged = updateVal(req.c_str(), "SX=", &speedIn);
intensityChanged = updateVal(req.c_str(), "IX=", &intensityIn);
paletteChanged = updateVal(req.c_str(), "FP=", &paletteIn, 0, strip.getPaletteCount()-1);
custom1Changed = updateVal(req.c_str(), "X1=", &custom1In);
custom2Changed = updateVal(req.c_str(), "X2=", &custom2In);
custom3Changed = updateVal(req.c_str(), "X3=", &custom3In);
check1Changed = updateVal(req.c_str(), "M1=", &check1In);
check2Changed = updateVal(req.c_str(), "M2=", &check2In);
check3Changed = updateVal(req.c_str(), "M3=", &check3In);
stateChanged |= (fxModeChanged || speedChanged || intensityChanged || paletteChanged || custom1Changed || custom2Changed || custom3Changed || check1Changed || check2Changed || check3Changed);
// apply to main and all selected segments to prevent #1618.
for (uint8_t i = 0; i < strip.getSegmentsNum(); i++) {
Segment& seg = strip.getSegment(i);
if (i != selectedSeg && (singleSegment || !seg.isActive() || !seg.isSelected())) continue; // skip non main segments if not applying to all
if (fxModeChanged) seg.setMode(effectIn, req.indexOf(F("FXD="))>0); // apply defaults if FXD= is specified
if (speedChanged) seg.speed = speedIn;
if (intensityChanged) seg.intensity = intensityIn;
if (paletteChanged) seg.setPalette(paletteIn);
if (custom1Changed) seg.custom1 = custom1In;
if (custom2Changed) seg.custom2 = custom2In;
if (custom3Changed) seg.custom3 = custom3In;
if (check1Changed) seg.check1 = (bool)check1In;
if (check2Changed) seg.check2 = (bool)check2In;
if (check3Changed) seg.check3 = (bool)check3In;
}
//set advanced overlay
pos = req.indexOf(F("OL="));
if (pos > 0) {
overlayCurrent = getNumVal(&req, pos);
}
//apply macro (deprecated, added for compatibility with pre-0.11 automations)
pos = req.indexOf(F("&M="));
if (pos > 0) {
applyPreset(getNumVal(&req, pos) + 16);
}
//toggle send UDP direct notifications
pos = req.indexOf(F("SN="));
if (pos > 0) notifyDirect = (req.charAt(pos+3) != '0');
//toggle receive UDP direct notifications
pos = req.indexOf(F("RN="));
if (pos > 0) receiveNotifications = (req.charAt(pos+3) != '0');
//receive live data via UDP/Hyperion
pos = req.indexOf(F("RD="));
if (pos > 0) receiveDirect = (req.charAt(pos+3) != '0');
//main toggle on/off (parse before nightlight, #1214)
pos = req.indexOf(F("&T="));
if (pos > 0) {
nightlightActive = false; //always disable nightlight when toggling
switch (getNumVal(&req, pos))
{
case 0: if (bri != 0){briLast = bri; bri = 0;} break; //off, only if it was previously on
case 1: if (bri == 0) bri = briLast; break; //on, only if it was previously off
default: toggleOnOff(); //toggle
}
}
//toggle nightlight mode
bool aNlDef = false;
if (req.indexOf(F("&ND")) > 0) aNlDef = true;
pos = req.indexOf(F("NL="));
if (pos > 0)
{
if (req.charAt(pos+3) == '0')
{
nightlightActive = false;
} else {
nightlightActive = true;
if (!aNlDef) nightlightDelayMins = getNumVal(&req, pos);
else nightlightDelayMins = nightlightDelayMinsDefault;
nightlightStartTime = millis();
}
} else if (aNlDef)
{
nightlightActive = true;
nightlightDelayMins = nightlightDelayMinsDefault;
nightlightStartTime = millis();
}
//set nightlight target brightness
pos = req.indexOf(F("NT="));
if (pos > 0) {
nightlightTargetBri = getNumVal(&req, pos);
nightlightActiveOld = false; //re-init
}
//toggle nightlight fade
pos = req.indexOf(F("NF="));
if (pos > 0)
{
nightlightMode = getNumVal(&req, pos);
nightlightActiveOld = false; //re-init
}
if (nightlightMode > NL_MODE_SUN) nightlightMode = NL_MODE_SUN;
pos = req.indexOf(F("TT="));
if (pos > 0) transitionDelay = getNumVal(&req, pos);
//set time (unix timestamp)
pos = req.indexOf(F("ST="));
if (pos > 0) {
setTimeFromAPI(getNumVal(&req, pos));
}
//set countdown goal (unix timestamp)
pos = req.indexOf(F("CT="));
if (pos > 0) {
countdownTime = getNumVal(&req, pos);
if (countdownTime - toki.second() > 0) countdownOverTriggered = false;
}
pos = req.indexOf(F("LO="));
if (pos > 0) {
realtimeOverride = getNumVal(&req, pos);
if (realtimeOverride > 2) realtimeOverride = REALTIME_OVERRIDE_ALWAYS;
if (realtimeMode && useMainSegmentOnly) {
strip.getMainSegment().freeze = !realtimeOverride;
}
}
pos = req.indexOf(F("RB"));
if (pos > 0) doReboot = true;
// clock mode, 0: normal, 1: countdown
pos = req.indexOf(F("NM="));
if (pos > 0) countdownMode = (req.charAt(pos+3) != '0');
pos = req.indexOf(F("U0=")); //user var 0
if (pos > 0) {
userVar0 = getNumVal(&req, pos);
}
pos = req.indexOf(F("U1=")); //user var 1
if (pos > 0) {
userVar1 = getNumVal(&req, pos);
}
// you can add more if you need
// global col[], effectCurrent, ... are updated in stateChanged()
if (!apply) return true; // when called by JSON API, do not call colorUpdated() here
pos = req.indexOf(F("&NN")); //do not send UDP notifications this time
stateUpdated((pos > 0) ? CALL_MODE_NO_NOTIFY : CALL_MODE_DIRECT_CHANGE);
// internal call, does not send XML response
pos = req.indexOf(F("IN"));
if (pos < 1) XML_response(request);
return true;
}
Reference in New Issue View Git Blame Copy Permalink