* added missing pinMode(.., INPUT) on esp32
* do not try reading from pin = -1 (ESP32-S2 shows very allergic reactions to this)
* Info page - show "n/a" when pin = -1
* readme: esp32 default pin = 35
- replace rOption by xOption (extend option) to show default value (⎌)
- Usermod rotary_encoder: add appendConfigData function and show help and default functions
- Settings.htm: Move Usermods(pins) below the usermods
Settings_um.htm
- remove SDAPin etc
- comment check(0,k) as not used anymore
- add xOption
- add generated global pin fields (using addField) in ldS
- remove hard coded global pin fields
set.cpp: set i2c_sda etc using new generated fields
xml.cpp: set generated fields values using i2c_sda etc and show defaults
- rename replaceOption to rOption
- rename removeOptions to dOptions
- set oAppend buffer size back to 3096
- WLEDMM warning on settings2D Populate
- add AppendConfig per usermod
- add request parameter to getSettinsJS
- add lookupName
Retrieving the config in `readFromConfig()` results in defaults being set to both `hourMarksEnabled` (`false`) and `hourMarkColor` (`#0000FF`) due to differences in capitalization compared to how they're saved in `addToConfig()`
make the serial plotter graphs easier to read:
* physical samples scaled down to 50%
* added 256 for all effect vars, so their graph will always be above the physical samples lines
got myself an adafruit "qt py -S2" with tinyUF2 bootloader. So I wanted to get that working. And it does work :-).
FFT time = 10ms (instead of 2ms on classic ESP32) is a very good result, also virtual USB runs much better now.
- new partition table for boards with UF2 boot (Adafruit qt py S2)
- better treatment of debug out using "USBCDC" native port
- workarounds for watchdog crashes on -S2
- Add missing but mandatory build flags for -S2 and -C3
Analog input seems to sometime have a very strong negative DC offset, when the signal is not centered at 1.8V. The bandpass filter should help to reenter such "off limits" signals.
See discussions in issue #10 .
Improve co-existence of several popular usermods with respect to shared I2C bus.
- ensure that i2c_sda and i2c_scl are used when defined
- ensure that HW_PIN_SDA / HW_PIN_SCL are not overwritten
- ensure that Wire.begin()nis always called with user-defined pins (remove rogue Wire.begin() without parameters)
- ensure that set.cpp / cfg.cpp use esp32-specific global Wire objects.
