AudioReactive: add disableROPins on WS, SCK, MCLK and SCL
4LD: add disableROPins on CLK
settingsum:
- addfield: max 49 pins, if (global interface) also disabled, rename if to global, show 🔴 if pin claimed
- add disableROPins
- pinDropdownsPost
- rename SDA to if:SDA (etc) so it is part of claimed pins (also in set.cpp and xml.cpp)
xml.cpp:
- appendGPIOinfo(): get rsvd and ro_gpio from pinManager.isPinOk instead of hardcoded
- getSettingsJS: add pinDropdownsPost
Fix 1d/2d default in customeffect, games and weather
index.htm: add buttons and text area for genPresets
index.js: add genPresets, uploadFileWithText and savePresetsGen
fx,cpp: set fire 2012 default palette 0 (fire colors)
Bonus: battery USERMOD_BATTERY_MEASUREMENT_PIN default -1
* usermods only need to to `if (!pinManager.joinWire()) return;`
* joinWire will
* * check if global I2C are defined - return false if not defined
* * aloocate HW_I2C pins - return false on error
* * call Wire.begin() if needed.
platformio: add _all entries with a lot of usermods
usermod bh1750 and bme280: avoid global pin hijacking
settings.htm: remove height for compact display
platformio
- create _all entries (wip)
- set FLD_PIN_SCL to -1 (use global)
4ld
- one bug fix and errorMessage improvements
const.h
- comments
wled.h
- do not use the I2CSDAPIN vars but HW_PIN_SDA instead
Usermod bh1750: only save pins if not equal to global
Usermod fld: add errorMessage, do not reset type and enabled but errormessage instead, show global depending in spi or i2c
cfg.cpp and set.cpp: do not reset global i2c or spi if error
* added missing pinMode(.., INPUT) on esp32
* do not try reading from pin = -1 (ESP32-S2 shows very allergic reactions to this)
* Info page - show "n/a" when pin = -1
* readme: esp32 default pin = 35
- replace rOption by xOption (extend option) to show default value (⎌)
- Usermod rotary_encoder: add appendConfigData function and show help and default functions
- Settings.htm: Move Usermods(pins) below the usermods
Settings_um.htm
- remove SDAPin etc
- comment check(0,k) as not used anymore
- add xOption
- add generated global pin fields (using addField) in ldS
- remove hard coded global pin fields
set.cpp: set i2c_sda etc using new generated fields
xml.cpp: set generated fields values using i2c_sda etc and show defaults
- rename replaceOption to rOption
- rename removeOptions to dOptions
- set oAppend buffer size back to 3096
- WLEDMM warning on settings2D Populate
- add AppendConfig per usermod
- add request parameter to getSettinsJS
- add lookupName
Retrieving the config in `readFromConfig()` results in defaults being set to both `hourMarksEnabled` (`false`) and `hourMarkColor` (`#0000FF`) due to differences in capitalization compared to how they're saved in `addToConfig()`
make the serial plotter graphs easier to read:
* physical samples scaled down to 50%
* added 256 for all effect vars, so their graph will always be above the physical samples lines
got myself an adafruit "qt py -S2" with tinyUF2 bootloader. So I wanted to get that working. And it does work :-).
FFT time = 10ms (instead of 2ms on classic ESP32) is a very good result, also virtual USB runs much better now.
- new partition table for boards with UF2 boot (Adafruit qt py S2)
- better treatment of debug out using "USBCDC" native port
- workarounds for watchdog crashes on -S2
- Add missing but mandatory build flags for -S2 and -C3
