updates for C3 builds
* updated flash size statistics * add missing platform_packages lines (critical) * Some "disable" flags to keep C3 builds below 100% flash limit
This commit is contained in:
Frank
@@ -607,10 +607,9 @@ board_build.flash_mode = qio
|
||||
|
||||
[env:esp32dev_V4_dio80]
|
||||
;; experimental ESP32 env using ESP-IDF V4.4.x
|
||||
;; Warning: this build environment is not stable!!
|
||||
;; please erase your device before installing.
|
||||
board = esp32dev
|
||||
platform = ${esp32_idf_V4.platform}
|
||||
platform_packages = ${esp32_idf_V4.platform_packages}
|
||||
build_unflags = ${common.build_unflags}
|
||||
build_flags = ${common.build_flags} ${esp32_idf_V4.build_flags} -D WLED_RELEASE_NAME=ESP32_V4_qio80 #-D WLED_DISABLE_BROWNOUT_DET
|
||||
lib_deps = ${esp32_idf_V4.lib_deps}
|
||||
@@ -664,6 +663,7 @@ lib_deps = ${esp32s2.lib_deps}
|
||||
[env:esp32c3dev]
|
||||
extends = esp32c3
|
||||
platform = ${esp32c3.platform}
|
||||
platform_packages = ${esp32c3.platform_packages}
|
||||
framework = arduino
|
||||
board = esp32-c3-devkitm-1
|
||||
board_build.partitions = ${esp32.default_partitions}
|
||||
@@ -675,7 +675,9 @@ build_flags = ${common.build_flags} ${esp32c3.build_flags} -D WLED_RELEASE_NAME=
|
||||
upload_speed = 460800
|
||||
build_unflags = ${common.build_unflags}
|
||||
lib_deps = ${esp32c3.lib_deps}
|
||||
board_build.flash_mode = qio
|
||||
board_build.flash_mode = dio ;; some boards do not boot with the faster "qio" mode
|
||||
; RAM: [== ] 22.5% (used 73740 bytes from 327680 bytes)
|
||||
; Flash: [==========] 96.3% (used 1515336 bytes from 1572864 bytes)
|
||||
|
||||
[env:esp32s3dev_8MB]
|
||||
;; ESP32-S3-DevKitC-1 development board, with 8MB FLASH, no PSRAM (flash_mode: qio)
|
||||
@@ -848,6 +850,8 @@ board_build.partitions = tools/WLED_ESP32_2MB_noOTA.csv
|
||||
board_build.flash_mode = dio
|
||||
board_upload.flash_size = 2MB
|
||||
board_upload.maximum_size = 2097152
|
||||
; RAM: [== ] 23.3% (used 76204 bytes from 327680 bytes)
|
||||
; Flash: [==========] 95.2% (used 1497536 bytes from 1572864 bytes)
|
||||
|
||||
;WLEDMM: see below
|
||||
; [env:wemos_shield_esp32]
|
||||
@@ -2435,9 +2439,9 @@ build_unflags = ${common.build_unflags}
|
||||
-D WLED_ENABLE_DMX ;; disabled because it does not work with ESP-IDF 4.4.x (buggy driver in SparkFunDMX)
|
||||
-D WLED_ENABLE_DMX_INPUT ;; needs more testing
|
||||
;-D WLED_DEBUG_HOST='"192.168.x.x"' ;; to disable net print
|
||||
-D USERMOD_ANIMARTRIX ;; Tips our memory usage over the limit
|
||||
${common_mm.animartrix_build_flags} ;; Tips our memory usage over the limit
|
||||
-DUSERMOD_ARTIFX ;; over the limit
|
||||
-DWLEDMM_FASTPATH ;; needs more testing on -C3
|
||||
-DWLED_ENABLE_FULL_FONTS ;; removing full unicode support saves 10KB of flash
|
||||
|
||||
build_flags = ${common.build_flags} ${esp32c3.build_flags}
|
||||
; -D WLED_DISABLE_OTA ;; OTA is not possible for boards with 2MB flash only (like some Ai-Thinker ESP32-C3-12F models)
|
||||
@@ -2462,14 +2466,15 @@ build_flags = ${common.build_flags} ${esp32c3.build_flags}
|
||||
-D SR_DMTYPE=1 -D I2S_SDPIN=5 -D I2S_WSPIN=6 -D I2S_CKPIN=4 -D MCLK_PIN=7
|
||||
; -D WLED_USE_MY_CONFIG
|
||||
-D WLED_DISABLE_PARTICLESYSTEM1D ;; exceeds flash size limit
|
||||
-D WLED_DISABLE_PARTICLESYSTEM2D ;; exceeds flash size limit
|
||||
;; -D WLED_DISABLE_PARTICLESYSTEM2D ;; exceeds flash size limit
|
||||
lib_deps = ${esp32c3.lib_deps} ${common_mm.lib_deps_S} ${common_mm.lib_deps_V4_M}
|
||||
lib_ignore =
|
||||
;IRremoteESP8266 ; use with WLED_DISABLE_INFRARED for faster compilation
|
||||
OneWire ; not needed as we don't include USERMOD_DALLASTEMPERATURE
|
||||
U8g2 ; not needed as we don't include USERMOD_FOUR_LINE_DISPLAY
|
||||
; RAM: [== ] 24.6% (used 80732 bytes from 327680 bytes)
|
||||
; Flash: [==========] 97.5% (used 1533360 bytes from 1572864 bytes)
|
||||
${common_mm.animartrix_lib_ignore} ;; Tips our memory usage over the limit
|
||||
; RAM: [== ] 24.7% (used 81004 bytes from 327680 bytes)
|
||||
; Flash: [==========] 99.2% (used 1559754 bytes from 1572864 bytes)
|
||||
;; MM environment for ESP32-C3 "mini" and "super mini" -> flash mode "dio" instead of "qio" (see #101)
|
||||
[env:esp32c3mini_dio_4MB_M]
|
||||
extends = env:esp32c3dev_4MB_M
|
||||
@@ -2484,18 +2489,16 @@ build_flags = ${env:esp32c3dev_4MB_M.build_flags}
|
||||
-DARDUINO_USB_CDC_ON_BOOT=0
|
||||
-D WLED_RELEASE_NAME=esp32c3mini_dio_4MB_M
|
||||
-D WLED_DISABLE_BROWNOUT_DET ;; the board only has a 500mA LDO, better to disable brownout detection
|
||||
-D WLED_DISABLE_ADALIGHT ;; to disable serial protocols for boards with CDC USB (Serial RX will receive junk commands, unless its pulled down by resistor)
|
||||
-D HW_PIN_SDA=0 -D HW_PIN_SCL=1 ;; avoid pin conflicts
|
||||
-D WLED_DISABLE_PARTICLESYSTEM1D ;; exceeds flash size limit
|
||||
-D WLED_DISABLE_PARTICLESYSTEM2D ;; exceeds flash size limit
|
||||
; RAM: [== ] 24.6% (used 80556 bytes from 327680 bytes)
|
||||
; Flash: [==========] 97.3% (used 1530346 bytes from 1572864 bytes)
|
||||
; RAM: [== ] 24.7% (used 80828 bytes from 327680 bytes)
|
||||
; Flash: [==========] 99.0% (used 1556768 bytes from 1572864 bytes)
|
||||
|
||||
[env:esp32c3dev_2MB_M]
|
||||
extends = env:esp32c3dev_4MB_M
|
||||
board = lolin_c3_mini
|
||||
;;; replace WLED_RELEASE_NAME, disable CDC_ON_BOOT
|
||||
build_unflags = ${env:esp32c3dev_4MB_M.build_unflags}
|
||||
-DWLED_ENABLE_FULL_FONTS ;; removing full unicode support saves 10KB of flash
|
||||
-DARDUINO_USB_CDC_ON_BOOT=1
|
||||
-D WLED_RELEASE_NAME=esp32c3dev_4MB_M
|
||||
|
||||
@@ -2515,9 +2518,9 @@ build_flags = ${env:esp32c3dev_4MB_M.build_flags}
|
||||
-D WLED_DISABLE_ADALIGHT ;; to disable serial protocols for boards with CDC USB (Serial RX will receive junk commands, unless its pulled down by resistor)
|
||||
-D HW_PIN_SDA=0 -D HW_PIN_SCL=1 ;; avoid pin conflicts
|
||||
-D WLED_DISABLE_PARTICLESYSTEM1D ;; exceeds flash size limit
|
||||
-D WLED_DISABLE_PARTICLESYSTEM2D ;; exceeds flash size limit
|
||||
; RAM: [== ] 24.0% (used 78676 bytes from 327680 bytes)
|
||||
; Flash: [==========] 96.4% (used 1516068 bytes from 1572864 bytes)
|
||||
;; -D WLED_DISABLE_PARTICLESYSTEM2D ;; exceeds flash size limit
|
||||
; RAM: [== ] 24.1% (used 78948 bytes from 327680 bytes)
|
||||
; Flash: [==========] 98.0% (used 1541914 bytes from 1572864 bytes)
|
||||
|
||||
;; MM environment for "seeed xiao -C3" boards
|
||||
[env:seeed_esp32c3_4MB_S]
|
||||
@@ -2525,10 +2528,9 @@ extends = env:esp32c3dev_4MB_M
|
||||
board = seeed_xiao_esp32c3
|
||||
platform = ${esp32.platformV4_pre} ;; standard IDF 4.4.1 platform - seems to work better for seeed xiao board
|
||||
platform_packages = ${esp32.platformV4_packages_pre}
|
||||
board_build.flash_mode = qio
|
||||
board_build.flash_mode = dio
|
||||
upload_speed = 460800
|
||||
build_unflags = ${env:esp32c3dev_4MB_M.build_unflags}
|
||||
-DWLEDMM_FASTPATH ;; needs more testing on -C3
|
||||
-D WLED_ENABLE_HUB75MATRIX ;; not enough pins
|
||||
-DARDUINO_USB_CDC_ON_BOOT=1 ;; hangs on boot
|
||||
build_flags = ${common.build_flags} ${esp32c3.build_flags}
|
||||
@@ -2552,8 +2554,8 @@ build_flags = ${common.build_flags} ${esp32c3.build_flags}
|
||||
lib_deps = ${esp32c3.lib_deps} ${common_mm.lib_deps_S}
|
||||
lib_ignore = IRremoteESP8266 ; use with WLED_DISABLE_INFRARED for faster compilation
|
||||
monitor_filters = esp32_exception_decoder
|
||||
; RAM: [== ] 22.4% (used 73388 bytes from 327680 bytes)
|
||||
; Flash: [========= ] 92.7% (used 1458598 bytes from 1572864 bytes)
|
||||
; RAM: [== ] 22.5% (used 73740 bytes from 327680 bytes)
|
||||
; Flash: [==========] 96.3% (used 1515336 bytes from 1572864 bytes)
|
||||
# ------------------------------------------------------------------------------
|
||||
# custom board environments
|
||||
# ------------------------------------------------------------------------------
|
||||
|
||||
Reference in New Issue
Block a user