Jan/WLED_MM_Infinity
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity

Disable use of serial RX pin on some boards

Browse Source
This commit is contained in:
Frank
2023-03-19 15:28:47 +01:00
parent 907679c2f5
commit d80e5cd063
1 changed files with 5 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

5
platformio.ini
View File

@@ -1254,6 +1254,7 @@ build_flags = ${common.build_flags} ${esp32s3.build_flags} -Wno-misleading-inden
-D WLED_RELEASE_NAME=esp32S3_8MB_M
-D ARDUINO_USB_MODE=1 -D ARDUINO_USB_CDC_ON_BOOT=0 -D ARDUINO_USB_MSC_ON_BOOT=0 -D ARDUINO_USB_DFU_ON_BOOT=0 ;; for Serial-to-USB chip
;; -D ARDUINO_USB_MODE=1 -D ARDUINO_USB_CDC_ON_BOOT=1 -D ARDUINO_USB_MSC_ON_BOOT=0 -D ARDUINO_USB_DFU_ON_BOOT=0 ;; for Hardware-CDC USB mode
;; -D WLED_DISABLE_ADALIGHT ;; disables serial protocols when using CDC USB (Serial RX will receive junk commands when RX pin is unconnected, unless its pulled down by resistor)
-D WLED_WATCHDOG_TIMEOUT=0 -D CONFIG_ASYNC_TCP_USE_WDT=0
; -D U8X8_HAVE_2ND_HW_I2C ;; experimental - tells U8g2 lib that a second HW I2C unit exists
-D WLED_DISABLE_LOXONE ; FLASH 1272 bytes
@@ -1312,6 +1313,7 @@ build_flags = ${common.build_flags} ${esp32s2.build_flags}
-Wno-misleading-indentation -Wno-format-truncation
-D WLED_RELEASE_NAME=esp32S2_4MB_UF2_M
-DARDUINO_USB_CDC_ON_BOOT=1 ;; mandatory, otherwise USB does not work!!
-D WLED_DISABLE_ADALIGHT ;; disables serial protocols when using CDC USB (Serial RX will receive junk commands, unless its pulled down by resistor)
-DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_USB_DFU_ON_BOOT=0
-D SERVERNAME='"WLED-S2"'
-D WLED_USE_PSRAM
@@ -1365,6 +1367,7 @@ build_flags = ${common.build_flags} ${esp32c3.build_flags}
-D WLED_RELEASE_NAME=esp32c3dev_4MB_M
; -D WLED_DISABLE_OTA ;; OTA is not possible for boards with 2MB flash only (like some Ai-Thinker ESP32-C3-12F models)
; -DARDUINO_USB_CDC_ON_BOOT=1 ;; enable CDC USB -> needed for debugging over serial USB
; -D WLED_DISABLE_ADALIGHT ;; to disable serial protocols when using CDC USB (Serial RX will receive junk commands, unless its pulled down by resistor)
-DARDUINO_USB_CDC_ON_BOOT=0 ;; disable CDC USB
-D SERVERNAME='"WLED-C3"'
;-D WLEDMM_WIFI_POWERON_HACK ;; use this _only_ if your device is not able to make a WiFI connection!
@@ -1506,6 +1509,7 @@ build_flags = ${esp32_4MB_M_base.build_flags}
-D WLED_DISABLE_BROWNOUT_DET
-D SERVERNAME='"WLED-pico32"'
; -D WLED_WATCHDOG_TIMEOUT=60
-D WLED_DISABLE_ADALIGHT ;; WLEDMM this board does not have a serial-to-USB chip. Better to disable serial protocols, to avoid crashes (see upstream #3128)
; -D WLED_DEBUG
; -D SR_DEBUG
-D LEDPIN=2
@@ -1541,6 +1545,7 @@ build_flags = ${esp32_4MB_V4_S_base.build_flags}
-D WLED_DISABLE_BROWNOUT_DET
-D SERVERNAME='"WLED-pico32-V4"'
-D WLED_WATCHDOG_TIMEOUT=0
-D WLED_DISABLE_ADALIGHT ;; WLEDMM this board does not have a serial-to-USB chip. Better to disable serial protocols, to avoid crashes (see upstream #3128)
; -D WLED_WATCHDOG_TIMEOUT=60
; -D WLED_DEBUG
; -D SR_DEBUG