Jan/WLED_MM_Infinity
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity

Hardware Info in debug output

Browse Source 
Adds these to lines to the serial USB debug output (at startup):
````
CPU:   ESP32-S3 rev. 0, 2 core(s), 240MHz.
FLASH: 8MB, Mode 2 (DIO), speed 80MHz.
PSRAM not used.````
This commit is contained in:
Frank
2022-09-03 16:55:30 +02:00
parent b13f13c2e4
commit 2436a1c52c
2 changed files with 31 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
platformio.ini
View File

@@ -33,6 +33,7 @@
; default_envs = esp8285_H801
; default_envs = d1_mini_5CH_Shojo_PCB
default_envs = esp32mdev
;default_envs = esp32s3-mdev
; default_envs = esp8266mdev
; default_envs = wemos_shield_esp32
; default_envs = m5atom
@@ -40,6 +41,7 @@ default_envs = esp32mdev
; default_envs = esp32dev_qio80
; default_envs = esp32_eth_ota1mapp
; default_envs = esp32s2_saola
; default_envs = esp32c3dev
src_dir = ./wled00
data_dir = ./wled00/data
@@ -506,6 +508,7 @@ build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp32s3}
-D WLED_RELEASE_NAME=ESP32S3 #-D WLED_DISABLE_BLYNK #-D WLED_DISABLE_BROWNOUT_DET
; -D WLED_DEBUG
-D USERMOD_AUDIOREACTIVE
-D UM_AUDIOREACTIVE_USE_NEW_FFT
-D USERMOD_CUSTOMEFFECTS
@@ -527,6 +530,7 @@ build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags_esp32}
-D WLED_RELEASE_NAME=ESP32 #-D WLED_DISABLE_BLYNK #-D WLED_DISABLE_BROWNOUT_DET
; -D WLED_DEBUG
-D USERMOD_AUDIOREACTIVE
-D UM_AUDIOREACTIVE_USE_NEW_FFT
-D USERMOD_CUSTOMEFFECTS

28
wled00/wled.cpp
View File

@@ -274,12 +274,32 @@ void WLED::setup()
#ifdef ARDUINO_ARCH_ESP32
DEBUG_PRINT(F("esp32 "));
DEBUG_PRINTLN(ESP.getSdkVersion());
DEBUG_PRINT(F("CPU: ")); DEBUG_PRINT(ESP.getChipModel());
DEBUG_PRINT(F(" rev. ")); DEBUG_PRINT(ESP.getChipRevision());
DEBUG_PRINT(F(", ")); DEBUG_PRINT(ESP.getChipCores()); DEBUG_PRINT(F(" core(s)"));
DEBUG_PRINT(F(", ")); DEBUG_PRINT(ESP.getCpuFreqMHz()); DEBUG_PRINTLN(F("MHz."));
DEBUG_PRINT(F("FLASH: ")); DEBUG_PRINT((ESP.getFlashChipSize()/1024)/1024);
DEBUG_PRINT(F("MB, Mode ")); DEBUG_PRINT(ESP.getFlashChipMode());
#ifdef WLED_DEBUG
switch (ESP.getFlashChipMode()) {
// missing: Octal modes
case FM_QIO: DEBUG_PRINT(F(" (QIO)")); break;
case FM_QOUT: DEBUG_PRINT(F(" (QOUT)"));break;
case FM_DIO: DEBUG_PRINT(F(" (DIO)")); break;
case FM_DOUT: DEBUG_PRINT(F(" (DOUT)"));break;
default: break;
}
#endif
DEBUG_PRINT(F(", speed ")); DEBUG_PRINT(ESP.getFlashChipSpeed()/1000000);DEBUG_PRINTLN(F("MHz."));
#else
DEBUG_PRINT(F("esp8266 "));
DEBUG_PRINTLN(ESP.getCoreVersion());
#endif
DEBUG_PRINT(F("heap "));
DEBUG_PRINTLN(ESP.getFreeHeap());
DEBUG_PRINTLN();
#if defined(ARDUINO_ARCH_ESP32) && defined(WLED_USE_PSRAM)
if (psramFound()) {
@@ -288,7 +308,13 @@ void WLED::setup()
managed_pin_type pins[2] = { {16, true}, {17, true} };
pinManager.allocateMultiplePins(pins, 2, PinOwner::SPI_RAM);
#endif
}
DEBUG_PRINT(F("Total PSRAM: ")); DEBUG_PRINT(ESP.getPsramSize()/1024); DEBUG_PRINTLN("kB");
DEBUG_PRINT(F("Free PSRAM : ")); DEBUG_PRINT(ESP.getFreePsram()/1024); DEBUG_PRINTLN("kB");
} else
DEBUG_PRINTLN(F("No PSRAM found."));
#endif
#if defined(ARDUINO_ARCH_ESP32) && defined(BOARD_HAS_PSRAM) && !defined(WLED_USE_PSRAM)
DEBUG_PRINTLN(F("PSRAM not used."));
#endif
//DEBUG_PRINT(F("LEDs inited. heap usage ~"));