Jan/WLED_MM_Infinity
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity
Files
e3444174c084c45d298252c309be2373d045f3ee
WLED_MM_Infinity/wled00/bus_manager.cpp
Frank 91ff04a79b HUB75 small optimization 
use CRGB instead converging to uint32_t, then extracting bytes with shift & mask
2024-10-29 18:45:54 +01:00

1310 lines
45 KiB
C++
Raw Blame History

/*
* Class implementation for addressing various light types
*/
#include <Arduino.h>
#include <IPAddress.h>
#include "const.h"
#include "pin_manager.h"
#include "bus_wrapper.h"
#include "bus_manager.h"
// WLEDMM functions to get/set bits in an array - based on functions created by Brandon for GOL
// toDo : make this a class that's completely defined in a header file
bool getBitFromArray(const uint8_t* byteArray, size_t position) { // get bit value
size_t byteIndex = position / 8;
unsigned bitIndex = position % 8;
uint8_t byteValue = byteArray[byteIndex];
return (byteValue >> bitIndex) & 1;
}
void setBitInArray(uint8_t* byteArray, size_t position, bool value) { // set bit - with error handling for nullptr
//if (byteArray == nullptr) return;
size_t byteIndex = position / 8;
unsigned bitIndex = position % 8;
if (value)
byteArray[byteIndex] |= (1 << bitIndex);
else
byteArray[byteIndex] &= ~(1 << bitIndex);
}
size_t getBitArrayBytes(size_t num_bits) { // number of bytes needed for an array with num_bits bits
return (num_bits + 7) / 8;
}
void setBitArray(uint8_t* byteArray, size_t numBits, bool value) { // set all bits to same value
if (byteArray == nullptr) return;
size_t len = getBitArrayBytes(numBits);
if (value) memset(byteArray, 0xFF, len);
else memset(byteArray, 0x00, len);
}
//WLEDMM: #define DEBUGOUT(x) netDebugEnabled?NetDebug.print(x):Serial.print(x) not supported in this file as netDebugEnabled not in scope
#if 0
//colors.cpp
uint32_t colorBalanceFromKelvin(uint16_t kelvin, uint32_t rgb);
uint16_t approximateKelvinFromRGB(uint32_t rgb);
void colorRGBtoRGBW(byte* rgb);
//udp.cpp
uint8_t realtimeBroadcast(uint8_t type, IPAddress client, uint16_t length, byte *buffer, uint8_t bri=255, bool isRGBW=false);
// enable additional debug output
#if defined(WLED_DEBUG_HOST)
#include "net_debug.h"
#define DEBUGOUT NetDebug
#else
#define DEBUGOUT Serial
#endif
#ifdef WLED_DEBUG
#ifndef ESP8266
#include <rom/rtc.h>
#endif
#define DEBUG_PRINT(x) DEBUGOUT.print(x)
#define DEBUG_PRINTLN(x) DEBUGOUT.println(x)
#define DEBUG_PRINTF(x...) DEBUGOUT.printf(x)
#else
#define DEBUG_PRINT(x)
#define DEBUG_PRINTLN(x)
#define DEBUG_PRINTF(x...)
#endif
#else
// un-define USER_PRINT macros from bus_wrapper.h
#undef USER_PRINT
#undef USER_PRINTF
#undef USER_PRINTLN
#undef USER_FLUSH
// WLEDMM use wled.h
#include "wled.h"
#endif
void ColorOrderMap::add(uint16_t start, uint16_t len, uint8_t colorOrder) {
if (_count >= WLED_MAX_COLOR_ORDER_MAPPINGS) {
return;
}
if (len == 0) {
return;
}
if (colorOrder > COL_ORDER_MAX) {
return;
}
_mappings[_count].start = start;
_mappings[_count].len = len;
_mappings[_count].colorOrder = colorOrder;
_count++;
}
uint8_t IRAM_ATTR ColorOrderMap::getPixelColorOrder(uint16_t pix, uint8_t defaultColorOrder) const {
if (_count == 0) return defaultColorOrder;
// upper nibble contains W swap information
uint8_t swapW = defaultColorOrder >> 4;
for (uint8_t i = 0; i < _count; i++) {
if (pix >= _mappings[i].start && pix < (_mappings[i].start + _mappings[i].len)) {
return _mappings[i].colorOrder | (swapW << 4);
}
}
return defaultColorOrder;
}
uint32_t Bus::autoWhiteCalc(uint32_t c) const {
uint8_t aWM = _autoWhiteMode;
if (_gAWM != AW_GLOBAL_DISABLED) aWM = _gAWM;
if (aWM == RGBW_MODE_MANUAL_ONLY) return c;
uint8_t w = W(c);
//ignore auto-white calculation if w>0 and mode DUAL (DUAL behaves as BRIGHTER if w==0)
if (w > 0 && aWM == RGBW_MODE_DUAL) return c;
uint8_t r = R(c);
uint8_t g = G(c);
uint8_t b = B(c);
if (aWM == RGBW_MODE_MAX) return RGBW32(r, g, b, r > g ? (r > b ? r : b) : (g > b ? g : b)); // brightest RGB channel
w = r < g ? (r < b ? r : b) : (g < b ? g : b);
if (aWM == RGBW_MODE_AUTO_ACCURATE) { r -= w; g -= w; b -= w; } //subtract w in ACCURATE mode
return RGBW32(r, g, b, w);
}
BusDigital::BusDigital(BusConfig &bc, uint8_t nr, const ColorOrderMap &com) : Bus(bc.type, bc.start, bc.autoWhite), _colorOrderMap(com) {
if (!IS_DIGITAL(bc.type) || !bc.count) return;
if (!pinManager.allocatePin(bc.pins[0], true, PinOwner::BusDigital)) return;
_frequencykHz = 0U;
_pins[0] = bc.pins[0];
if (IS_2PIN(bc.type)) {
if (!pinManager.allocatePin(bc.pins[1], true, PinOwner::BusDigital)) {
cleanup(); return;
}
_pins[1] = bc.pins[1];
_frequencykHz = bc.frequency ? bc.frequency : 2000U; // 2MHz clock if undefined
}
reversed = bc.reversed;
_needsRefresh = bc.refreshReq || bc.type == TYPE_TM1814;
_skip = bc.skipAmount; //sacrificial pixels
_len = bc.count + _skip;
_iType = PolyBus::getI(bc.type, _pins, nr);
if (_iType == I_NONE) return;
uint16_t lenToCreate = _len;
if (bc.type == TYPE_WS2812_1CH_X3) lenToCreate = NUM_ICS_WS2812_1CH_3X(_len); // only needs a third of "RGB" LEDs for NeoPixelBus
_busPtr = PolyBus::create(_iType, _pins, lenToCreate, nr, _frequencykHz);
_valid = (_busPtr != nullptr);
_colorOrder = bc.colorOrder;
if (_pins[1] != 255) { // WLEDMM USER_PRINTF
USER_PRINTF("%successfully inited strip %u (len %u) with type %u and pins %u,%u (itype %u)", _valid?"S":"Uns", nr, _len, bc.type, _pins[0],_pins[1],_iType);
if (bc.frequency > 999) USER_PRINTF(", %d MHz", bc.frequency/1000);
USER_PRINTLN();
} else {
USER_PRINTF("%successfully inited strip %u (len %u) with type %u and pin %u (itype %u)\n", _valid?"S":"Uns", nr, _len, bc.type, _pins[0],_iType);
}
}
void BusDigital::show() {
PolyBus::show(_busPtr, _iType);
}
bool BusDigital::canShow() {
return PolyBus::canShow(_busPtr, _iType);
}
void BusDigital::setBrightness(uint8_t b, bool immediate) {
//Fix for turning off onboard LED breaking bus
#ifdef LED_BUILTIN
if (_bri == 0 && b > 0) {
if (_pins[0] == LED_BUILTIN || _pins[1] == LED_BUILTIN) PolyBus::begin(_busPtr, _iType, _pins);
}
#endif
Bus::setBrightness(b, immediate);
PolyBus::setBrightness(_busPtr, _iType, b, immediate);
}
//If LEDs are skipped, it is possible to use the first as a status LED.
//TODO only show if no new show due in the next 50ms
void BusDigital::setStatusPixel(uint32_t c) {
if (_skip && canShow()) {
PolyBus::setPixelColor(_busPtr, _iType, 0, c, _colorOrderMap.getPixelColorOrder(_start, _colorOrder));
PolyBus::show(_busPtr, _iType);
}
}
void IRAM_ATTR BusDigital::setPixelColor(uint16_t pix, uint32_t c) {
if (_type == TYPE_SK6812_RGBW || _type == TYPE_TM1814 || _type == TYPE_WS2812_1CH_X3) c = autoWhiteCalc(c);
if (_cct >= 1900) c = colorBalanceFromKelvin(_cct, c); //color correction from CCT
if (reversed) pix = _len - pix -1;
else pix += _skip;
uint8_t co = _colorOrderMap.getPixelColorOrder(pix+_start, _colorOrder);
if (_type == TYPE_WS2812_1CH_X3) { // map to correct IC, each controls 3 LEDs
uint16_t pOld = pix;
pix = IC_INDEX_WS2812_1CH_3X(pix);
uint32_t cOld = PolyBus::getPixelColor(_busPtr, _iType, pix, co);
switch (pOld % 3) { // change only the single channel (TODO: this can cause loss because of get/set)
case 0: c = RGBW32(R(cOld), W(c) , B(cOld), 0); break;
case 1: c = RGBW32(W(c) , G(cOld), B(cOld), 0); break;
case 2: c = RGBW32(R(cOld), G(cOld), W(c) , 0); break;
}
}
PolyBus::setPixelColor(_busPtr, _iType, pix, c, co);
}
uint32_t IRAM_ATTR_YN BusDigital::getPixelColor(uint16_t pix) const {
if (reversed) pix = _len - pix -1;
else pix += _skip;
uint8_t co = _colorOrderMap.getPixelColorOrder(pix+_start, _colorOrder);
if (_type == TYPE_WS2812_1CH_X3) { // map to correct IC, each controls 3 LEDs
uint16_t pOld = pix;
pix = IC_INDEX_WS2812_1CH_3X(pix);
uint32_t c = PolyBus::getPixelColor(_busPtr, _iType, pix, co);
switch (pOld % 3) { // get only the single channel
case 0: c = RGBW32(G(c), G(c), G(c), G(c)); break;
case 1: c = RGBW32(R(c), R(c), R(c), R(c)); break;
case 2: c = RGBW32(B(c), B(c), B(c), B(c)); break;
}
return c;
}
return PolyBus::getPixelColor(_busPtr, _iType, pix, co);
}
uint8_t BusDigital::getPins(uint8_t* pinArray) const {
uint8_t numPins = IS_2PIN(_type) ? 2 : 1;
for (uint8_t i = 0; i < numPins; i++) pinArray[i] = _pins[i];
return numPins;
}
void BusDigital::setColorOrder(uint8_t colorOrder) {
// upper nibble contains W swap information
if ((colorOrder & 0x0F) > 5) return;
_colorOrder = colorOrder;
}
void BusDigital::reinit() {
PolyBus::begin(_busPtr, _iType, _pins);
}
void BusDigital::cleanup() {
DEBUG_PRINTLN(F("Digital Cleanup."));
PolyBus::cleanup(_busPtr, _iType);
_iType = I_NONE;
_valid = false;
_busPtr = nullptr;
pinManager.deallocatePin(_pins[1], PinOwner::BusDigital);
pinManager.deallocatePin(_pins[0], PinOwner::BusDigital);
}
BusPwm::BusPwm(BusConfig &bc) : Bus(bc.type, bc.start, bc.autoWhite) {
_valid = false;
if (!IS_PWM(bc.type)) return;
uint8_t numPins = NUM_PWM_PINS(bc.type);
_frequency = bc.frequency ? bc.frequency : WLED_PWM_FREQ;
#ifdef ESP8266
analogWriteRange(255); //same range as one RGB channel
analogWriteFreq(_frequency);
#else
_ledcStart = pinManager.allocateLedc(numPins);
if (_ledcStart == 255) { //no more free LEDC channels
deallocatePins(); return;
}
#endif
USER_PRINT("[PWM");
for (uint8_t i = 0; i < numPins; i++) {
uint8_t currentPin = bc.pins[i];
if (!pinManager.allocatePin(currentPin, true, PinOwner::BusPwm)) {
deallocatePins(); return;
}
_pins[i] = currentPin; //store only after allocatePin() succeeds
#ifdef ESP8266
pinMode(_pins[i], OUTPUT);
#else
ledcSetup(_ledcStart + i, _frequency, 8);
ledcAttachPin(_pins[i], _ledcStart + i);
#endif
USER_PRINT(" "); USER_PRINT(currentPin);
}
USER_PRINTLN("] ");
reversed = bc.reversed;
_valid = true;
}
void BusPwm::setPixelColor(uint16_t pix, uint32_t c) {
if (pix != 0 || !_valid) return; //only react to first pixel
if (_type != TYPE_ANALOG_3CH) c = autoWhiteCalc(c);
if (_cct >= 1900 && (_type == TYPE_ANALOG_3CH || _type == TYPE_ANALOG_4CH)) {
c = colorBalanceFromKelvin(_cct, c); //color correction from CCT
}
uint8_t r = R(c);
uint8_t g = G(c);
uint8_t b = B(c);
uint8_t w = W(c);
uint8_t cct = 0; //0 - full warm white, 255 - full cold white
if (_cct > -1) {
if (_cct >= 1900) cct = (_cct - 1900) >> 5;
else if (_cct < 256) cct = _cct;
} else {
cct = (approximateKelvinFromRGB(c) - 1900) >> 5;
}
uint8_t ww, cw;
#ifdef WLED_USE_IC_CCT
ww = w;
cw = cct;
#else
//0 - linear (CCT 127 = 50% warm, 50% cold), 127 - additive CCT blending (CCT 127 = 100% warm, 100% cold)
if (cct < _cctBlend) ww = 255;
else ww = ((255-cct) * 255) / (255 - _cctBlend);
if ((255-cct) < _cctBlend) cw = 255;
else cw = (cct * 255) / (255 - _cctBlend);
ww = (w * ww) / 255; //brightness scaling
cw = (w * cw) / 255;
#endif
switch (_type) {
case TYPE_ANALOG_1CH: //one channel (white), relies on auto white calculation
_data[0] = w;
break;
case TYPE_ANALOG_2CH: //warm white + cold white
_data[1] = cw;
_data[0] = ww;
break;
case TYPE_ANALOG_5CH: //RGB + warm white + cold white
_data[4] = cw;
w = ww;
case TYPE_ANALOG_4CH: //RGBW
_data[3] = w;
case TYPE_ANALOG_3CH: //standard dumb RGB
_data[0] = r; _data[1] = g; _data[2] = b;
break;
}
}
//does no index check
uint32_t BusPwm::getPixelColor(uint16_t pix) const {
if (!_valid) return 0;
#if 1
// WLEDMM stick with the old code - we don't have cctICused
return RGBW32(_data[0], _data[1], _data[2], _data[3]);
#else
// TODO getting the reverse from CCT is involved (a quick approximation when CCT blending is ste to 0 implemented)
switch (_type) {
case TYPE_ANALOG_1CH: //one channel (white), relies on auto white calculation
return RGBW32(0, 0, 0, _data[0]);
case TYPE_ANALOG_2CH: //warm white + cold white
if (cctICused) return RGBW32(0, 0, 0, _data[0]);
else return RGBW32(0, 0, 0, _data[0] + _data[1]);
case TYPE_ANALOG_5CH: //RGB + warm white + cold white
if (cctICused) return RGBW32(_data[0], _data[1], _data[2], _data[3]);
else return RGBW32(_data[0], _data[1], _data[2], _data[3] + _data[4]);
case TYPE_ANALOG_4CH: //RGBW
return RGBW32(_data[0], _data[1], _data[2], _data[3]);
case TYPE_ANALOG_3CH: //standard dumb RGB
return RGBW32(_data[0], _data[1], _data[2], 0);
}
return RGBW32(_data[0], _data[0], _data[0], _data[0]);
#endif
}
void BusPwm::show() {
if (!_valid) return;
uint8_t numPins = NUM_PWM_PINS(_type);
for (uint8_t i = 0; i < numPins; i++) {
uint8_t scaled = (_data[i] * _bri) / 255;
if (reversed) scaled = 255 - scaled;
#ifdef ESP8266
analogWrite(_pins[i], scaled);
#else
ledcWrite(_ledcStart + i, scaled);
#endif
}
}
uint8_t BusPwm::getPins(uint8_t* pinArray) const {
if (!_valid) return 0;
uint8_t numPins = NUM_PWM_PINS(_type);
for (uint8_t i = 0; i < numPins; i++) {
pinArray[i] = _pins[i];
}
return numPins;
}
void BusPwm::deallocatePins() {
uint8_t numPins = NUM_PWM_PINS(_type);
for (uint8_t i = 0; i < numPins; i++) {
pinManager.deallocatePin(_pins[i], PinOwner::BusPwm);
if (!pinManager.isPinOk(_pins[i])) continue;
#ifdef ESP8266
digitalWrite(_pins[i], LOW); //turn off PWM interrupt
#else
if (_ledcStart < 16) ledcDetachPin(_pins[i]);
#endif
}
#ifdef ARDUINO_ARCH_ESP32
pinManager.deallocateLedc(_ledcStart, numPins);
#endif
}
BusOnOff::BusOnOff(BusConfig &bc) : Bus(bc.type, bc.start, bc.autoWhite) {
_valid = false;
if (bc.type != TYPE_ONOFF) return;
uint8_t currentPin = bc.pins[0];
if (!pinManager.allocatePin(currentPin, true, PinOwner::BusOnOff)) {
return;
}
_pin = currentPin; //store only after allocatePin() succeeds
pinMode(_pin, OUTPUT);
reversed = bc.reversed;
_valid = true;
USER_PRINTF("[On-Off %d] \n", int(currentPin));
}
void BusOnOff::setPixelColor(uint16_t pix, uint32_t c) {
if (pix != 0 || !_valid) return; //only react to first pixel
c = autoWhiteCalc(c);
uint8_t r = R(c);
uint8_t g = G(c);
uint8_t b = B(c);
uint8_t w = W(c);
_data = bool(r|g|b|w) && bool(_bri) ? 0xFF : 0;
}
uint32_t BusOnOff::getPixelColor(uint16_t pix) const {
if (!_valid) return 0;
return RGBW32(_data, _data, _data, _data);
}
void BusOnOff::show() {
if (!_valid) return;
digitalWrite(_pin, reversed ? !(bool)_data : (bool)_data);
}
uint8_t BusOnOff::getPins(uint8_t* pinArray) const {
if (!_valid) return 0;
pinArray[0] = _pin;
return 1;
}
BusNetwork::BusNetwork(BusConfig &bc) : Bus(bc.type, bc.start, bc.autoWhite) {
_valid = false;
USER_PRINT("[");
switch (bc.type) {
case TYPE_NET_ARTNET_RGB:
_rgbw = false;
_UDPtype = 2;
USER_PRINT("NET_ARTNET_RGB");
break;
case TYPE_NET_E131_RGB:
_rgbw = false;
_UDPtype = 1;
USER_PRINT("NET_E131_RGB");
break;
default: // TYPE_NET_DDP_RGB / TYPE_NET_DDP_RGBW
_rgbw = bc.type == TYPE_NET_DDP_RGBW;
_UDPtype = 0;
USER_PRINT(bc.type == TYPE_NET_DDP_RGBW ? "NET_DDP_RGBW" : "NET_DDP_RGB");
break;
}
_UDPchannels = _rgbw ? 4 : 3;
_data = (byte *)malloc(bc.count * _UDPchannels);
if (_data == nullptr) return;
memset(_data, 0, bc.count * _UDPchannels);
_len = bc.count;
_client = IPAddress(bc.pins[0],bc.pins[1],bc.pins[2],bc.pins[3]);
_broadcastLock = false;
_valid = true;
USER_PRINTF(" %u.%u.%u.%u] \n", bc.pins[0],bc.pins[1],bc.pins[2],bc.pins[3]);
}
void BusNetwork::setPixelColor(uint16_t pix, uint32_t c) {
if (!_valid || pix >= _len) return;
if (hasWhite()) c = autoWhiteCalc(c);
if (_cct >= 1900) c = colorBalanceFromKelvin(_cct, c); //color correction from CCT
uint16_t offset = pix * _UDPchannels;
_data[offset] = R(c);
_data[offset+1] = G(c);
_data[offset+2] = B(c);
if (_rgbw) _data[offset+3] = W(c);
}
uint32_t BusNetwork::getPixelColor(uint16_t pix) const {
if (!_valid || pix >= _len) return 0;
uint16_t offset = pix * _UDPchannels;
return RGBW32(_data[offset], _data[offset+1], _data[offset+2], _rgbw ? (_data[offset+3] << 24) : 0);
}
void BusNetwork::show() {
if (!_valid || !canShow()) return;
_broadcastLock = true;
realtimeBroadcast(_UDPtype, _client, _len, _data, _bri, _rgbw);
_broadcastLock = false;
}
uint8_t BusNetwork::getPins(uint8_t* pinArray) const {
for (uint8_t i = 0; i < 4; i++) {
pinArray[i] = _client[i];
}
return 4;
}
void BusNetwork::cleanup() {
_type = I_NONE;
_valid = false;
if (_data != nullptr) free(_data);
_data = nullptr;
}
// ***************************************************************************
#ifdef WLED_ENABLE_HUB75MATRIX
#warning "HUB75 driver enabled (experimental)"
// BusHub75Matrix "global" variables (static members)
MatrixPanel_I2S_DMA* BusHub75Matrix::activeDisplay = nullptr;
VirtualMatrixPanel* BusHub75Matrix::activeFourScanPanel = nullptr;
HUB75_I2S_CFG BusHub75Matrix::activeMXconfig = HUB75_I2S_CFG();
uint8_t BusHub75Matrix::activeType = 0;
uint8_t BusHub75Matrix::instanceCount = 0;
// --------------------------
// Bitdepth reduction based on panel size
// --------------------------
#if defined(CONFIG_IDF_TARGET_ESP32S3) && CONFIG_SPIRAM_MODE_OCT && defined(BOARD_HAS_PSRAM) && (defined(WLED_USE_PSRAM) || defined(WLED_USE_PSRAM_JSON))
// esp32-S3 with octal PSRAM
#if defined(SPIRAM_FRAMEBUFFER)
// when PSRAM is used for pixel buffers
#define MAX_PIXELS_8BIT (192 * 64)
#define MAX_PIXELS_6BIT ( 64 * 64) // trick: skip this category, so we go directly from 8bit to 4bit
#define MAX_PIXELS_4BIT (256 * 128)
#else
// PSRAM not used for pixel buffers
#define MAX_PIXELS_8BIT (128 * 64)
#define MAX_PIXELS_6BIT (192 * 64)
#define MAX_PIXELS_4BIT (256 * 64)
#endif
#elif defined(CONFIG_IDF_TARGET_ESP32S3)
// standard esp32-S3
#define MAX_PIXELS_8BIT ( 96 * 64)
#define MAX_PIXELS_6BIT (128 * 64)
#define MAX_PIXELS_4BIT (160 * 64)
#elif defined(CONFIG_IDF_TARGET_ESP32S2)
// esp32-S2 only has 320KB RAM
#define MAX_PIXELS_8BIT ( 48 * 48)
#define MAX_PIXELS_6BIT ( 64 * 48)
#define MAX_PIXELS_4BIT ( 96 * 64)
#else
// classic esp32, and anything else
#define MAX_PIXELS_8BIT ( 64 * 64)
#define MAX_PIXELS_6BIT ( 96 * 64)
#define MAX_PIXELS_4BIT (128 * 64)
#endif
// --------------------------
BusHub75Matrix::BusHub75Matrix(BusConfig &bc) : Bus(bc.type, bc.start, bc.autoWhite) {
MatrixPanel_I2S_DMA* display = nullptr;
VirtualMatrixPanel* fourScanPanel = nullptr;
HUB75_I2S_CFG mxconfig;
size_t lastHeap = ESP.getFreeHeap();
_valid = false;
_len = 0;
// allow exactly one instance
if (instanceCount > 0) {
USER_PRINTLN("****** MatrixPanel_I2S_DMA !KABOOM! already active - preventing attempt to create more than one driver instance.");
return;
}
mxconfig.double_buff = false; // Use our own memory-optimised buffer rather than the driver's own double-buffer
// mxconfig.driver = HUB75_I2S_CFG::ICN2038S; // experimental - use specific shift register driver
// mxconfig.driver = HUB75_I2S_CFG::FM6124; // try this driver in case you panel stays dark, or when colors look too pastel
// mxconfig.latch_blanking = 1; // needed for some ICS panels
// mxconfig.latch_blanking = 3; // use in case you see gost images
// mxconfig.i2sspeed = HUB75_I2S_CFG::HZ_10M; // experimental - 5MHZ should be enugh, but colours looks slightly better at 10MHz
// mxconfig.min_refresh_rate = 90;
mxconfig.clkphase = false; // can help in case that the leftmost column is invisible, or pixels on the right side "bleeds out" to the left.
// How many panels we have connected, cap at sane value
mxconfig.chain_length = max((uint8_t) 1, min(bc.pins[0], (uint8_t) 4)); // prevent bad data preventing boot due to low memory
#if defined(CONFIG_IDF_TARGET_ESP32S3) && defined(BOARD_HAS_PSRAM)
if(bc.pins[0] > 4) {
USER_PRINTLN("WARNING, chain limited to 4");
}
# else
// Disable this check if you are want to try bigger setups and accept you
// might need to do full erase to recover from memory relayed boot-loop if you push too far
if(mxconfig.mx_height >= 64 && (bc.pins[0] > 1)) {
USER_PRINTLN("WARNING, only single panel can be used of 64 pixel boards due to memory");
//mxconfig.chain_length = 1;
}
#endif
switch(bc.type) {
case 101:
mxconfig.mx_width = 32;
mxconfig.mx_height = 32;
break;
case 102:
mxconfig.mx_width = 64;
mxconfig.mx_height = 32;
break;
case 103:
mxconfig.mx_width = 64;
mxconfig.mx_height = 64;
break;
case 104: // untested
mxconfig.mx_width = 128;
mxconfig.mx_height = 64;
break;
case 105:
mxconfig.mx_width = 32 * 2;
mxconfig.mx_height = 32 / 2;
break;
case 106:
mxconfig.mx_width = 64 * 2;
mxconfig.mx_height = 32 / 2;
break;
case 107:
mxconfig.mx_width = 64 * 2;
mxconfig.mx_height = 64 / 2;
break;
case 108: // untested
mxconfig.mx_width = 128 * 2;
mxconfig.mx_height = 64 / 2;
break;
}
// reduce bitdepth based on total pixels
unsigned numPixels = mxconfig.mx_height * mxconfig.mx_width * mxconfig.chain_length;
if (numPixels <= MAX_PIXELS_8BIT) mxconfig.setPixelColorDepthBits(8); // 24bit
else if (numPixels <= MAX_PIXELS_6BIT) mxconfig.setPixelColorDepthBits(6); // 18bit
else if (numPixels <= MAX_PIXELS_4BIT) mxconfig.setPixelColorDepthBits(4); // 12bit
else mxconfig.setPixelColorDepthBits(3); // 9bit
#if defined(ARDUINO_ADAFRUIT_MATRIXPORTAL_ESP32S3) // MatrixPortal ESP32-S3
// https://www.adafruit.com/product/5778
USER_PRINTLN("MatrixPanel_I2S_DMA - Matrix Portal S3 config");
mxconfig.gpio.r1 = 42;
mxconfig.gpio.g1 = 41;
mxconfig.gpio.b1 = 40;
mxconfig.gpio.r2 = 38;
mxconfig.gpio.g2 = 39;
mxconfig.gpio.b2 = 37;
mxconfig.gpio.lat = 47;
mxconfig.gpio.oe = 14;
mxconfig.gpio.clk = 2;
mxconfig.gpio.a = 45;
mxconfig.gpio.b = 36;
mxconfig.gpio.c = 48;
mxconfig.gpio.d = 35;
mxconfig.gpio.e = 21;
#elif defined(CONFIG_IDF_TARGET_ESP32S3) && defined(BOARD_HAS_PSRAM)// ESP32-S3
USER_PRINTLN("MatrixPanel_I2S_DMA - S3 with PSRAM");
mxconfig.gpio.r1 = 1;
mxconfig.gpio.g1 = 2;
mxconfig.gpio.b1 = 42;
// 4th pin is GND
mxconfig.gpio.r2 = 41;
mxconfig.gpio.g2 = 40;
mxconfig.gpio.b2 = 39;
mxconfig.gpio.e = 38;
mxconfig.gpio.a = 45;
mxconfig.gpio.b = 48;
mxconfig.gpio.c = 47;
mxconfig.gpio.d = 21;
mxconfig.gpio.clk = 18;
mxconfig.gpio.lat = 8;
mxconfig.gpio.oe = 3;
// 16th pin is GND
#elif defined(CONFIG_IDF_TARGET_ESP32S3) // ESP32-S3
// Huidu HD-WF2 ESP32-S3
// https://www.aliexpress.com/item/1005002258734810.html
// https://github.com/mrcodetastic/ESP32-HUB75-MatrixPanel-DMA/issues/433
USER_PRINTLN("MatrixPanel_I2S_DMA - HD-WF2 S3 config");
mxconfig.gpio.r1 = 2;
mxconfig.gpio.g1 = 6;
mxconfig.gpio.b1 = 10;
mxconfig.gpio.r2 = 3;
mxconfig.gpio.g2 = 7;
mxconfig.gpio.b2 = 11;
mxconfig.gpio.lat = 33;
mxconfig.gpio.oe = 35;
mxconfig.gpio.clk = 34;
mxconfig.gpio.a = 39;
mxconfig.gpio.b = 38;
mxconfig.gpio.c = 37;
mxconfig.gpio.d = 36;
mxconfig.gpio.e = 21;
#elif defined(CONFIG_IDF_TARGET_ESP32S2) // ESP32-S2
// Huidu HD-WF1 ESP32-S2
// https://github.com/mrcodetastic/ESP32-HUB75-MatrixPanel-DMA/issues/433
USER_PRINTLN("MatrixPanel_I2S_DMA - HD-WF1 S2 config");
mxconfig.gpio.r1 = 2;
mxconfig.gpio.g1 = 6;
mxconfig.gpio.b1 = 3;
mxconfig.gpio.r2 = 4;
mxconfig.gpio.g2 = 8;
mxconfig.gpio.b2 = 5;
mxconfig.gpio.lat = 33;
mxconfig.gpio.oe = 35;
mxconfig.gpio.clk = 34;
mxconfig.gpio.a = 39;
mxconfig.gpio.b = 38;
mxconfig.gpio.c = 37;
mxconfig.gpio.d = 36;
mxconfig.gpio.e = 12;
#elif defined(ESP32_FORUM_PINOUT) // Common format for boards designed for SmartMatrix
USER_PRINTLN("MatrixPanel_I2S_DMA - ESP32_FORUM_PINOUT");
/*
ESP32 with SmartMatrix's default pinout - ESP32_FORUM_PINOUT
https://github.com/pixelmatix/SmartMatrix/blob/teensylc/src/MatrixHardware_ESP32_V0.h
Can use a board like https://github.com/rorosaurus/esp32-hub75-driver
*/
mxconfig.gpio.r1 = 2;
mxconfig.gpio.g1 = 15;
mxconfig.gpio.b1 = 4;
mxconfig.gpio.r2 = 16;
mxconfig.gpio.g2 = 27;
mxconfig.gpio.b2 = 17;
mxconfig.gpio.lat = 26;
mxconfig.gpio.oe = 25;
mxconfig.gpio.clk = 22;
mxconfig.gpio.a = 5;
mxconfig.gpio.b = 18;
mxconfig.gpio.c = 19;
mxconfig.gpio.d = 21;
mxconfig.gpio.e = 12;
#else
USER_PRINTLN("MatrixPanel_I2S_DMA - Default pins");
/*
https://github.com/mrfaptastic/ESP32-HUB75-MatrixPanel-DMA?tab=readme-ov-file
Boards
https://esp32trinity.com/
https://www.electrodragon.com/product/rgb-matrix-panel-drive-interface-board-for-esp32-dma/
*/
mxconfig.gpio.r1 = 25;
mxconfig.gpio.g1 = 26;
mxconfig.gpio.b1 = 27;
mxconfig.gpio.r2 = 14;
mxconfig.gpio.g2 = 12;
mxconfig.gpio.b2 = 13;
mxconfig.gpio.lat = 4;
mxconfig.gpio.oe = 15;
mxconfig.gpio.clk = 16;
mxconfig.gpio.a = 23;
mxconfig.gpio.b = 19;
mxconfig.gpio.c = 5;
mxconfig.gpio.d = 17;
mxconfig.gpio.e = 18;
#endif
USER_PRINTF("MatrixPanel_I2S_DMA config - %ux%u (type %u) length: %u, %u bits/pixel.\n", mxconfig.mx_width, mxconfig.mx_height, bc.type, mxconfig.chain_length, mxconfig.getPixelColorDepthBits() * 3);
DEBUG_PRINT(F("Free heap: ")); DEBUG_PRINTLN(ESP.getFreeHeap()); lastHeap = ESP.getFreeHeap();
// check if we can re-use the existing display driver
if (activeDisplay) {
if ( (memcmp(&(activeMXconfig.gpio), &(mxconfig.gpio), sizeof(mxconfig.gpio)) != 0) // other pins?
|| (activeMXconfig.chain_length != mxconfig.chain_length) // other chain length?
|| (activeMXconfig.mx_width != mxconfig.mx_width) || (activeMXconfig.mx_height != mxconfig.mx_height) // other size?
|| (bc.type != activeType) // different panel type ?
|| (activeMXconfig.clkphase != mxconfig.clkphase) // different driver options ?
|| (activeMXconfig.latch_blanking != mxconfig.latch_blanking)
|| (activeMXconfig.i2sspeed != mxconfig.i2sspeed)
|| (activeMXconfig.driver != mxconfig.driver)
|| (activeMXconfig.min_refresh_rate != mxconfig.min_refresh_rate)
|| (activeMXconfig.getPixelColorDepthBits() != mxconfig.getPixelColorDepthBits()) )
{
// not the same as before - delete old driver
DEBUG_PRINTLN("MatrixPanel_I2S_DMA deleting old driver!");
activeDisplay->stopDMAoutput();
delay(28);
//#if !defined(CONFIG_IDF_TARGET_ESP32S3) // prevent crash
delete activeDisplay;
//#endif
activeDisplay = nullptr;
activeFourScanPanel = nullptr;
#if defined(CONFIG_IDF_TARGET_ESP32S3) // runtime reconfiguration is not working on -S3
USER_PRINTLN("\n\n****** MatrixPanel_I2S_DMA !KABOOM WARNING! Reboot needed to change driver options ***********\n");
errorFlag = ERR_REBOOT_NEEDED;
#endif
}
}
// OK, now we can create our matrix object
bool newDisplay = false; // true when the previous display object wasn't re-used
if (!activeDisplay) {
display = new MatrixPanel_I2S_DMA(mxconfig); // create new matrix object
newDisplay = true;
} else {
display = activeDisplay; // continue with existing matrix object
fourScanPanel = activeFourScanPanel;
}
if (display == nullptr) {
USER_PRINTLN("****** MatrixPanel_I2S_DMA !KABOOM! driver allocation failed ***********");
activeDisplay = nullptr;
activeFourScanPanel = nullptr;
USER_PRINT(F("heap usage: ")); USER_PRINTLN(int(lastHeap - ESP.getFreeHeap()));
return;
}
this->_len = (display->width() * display->height());
pinManager.allocatePin(mxconfig.gpio.r1, true, PinOwner::HUB75);
pinManager.allocatePin(mxconfig.gpio.g1, true, PinOwner::HUB75);
pinManager.allocatePin(mxconfig.gpio.b1, true, PinOwner::HUB75);
pinManager.allocatePin(mxconfig.gpio.r2, true, PinOwner::HUB75);
pinManager.allocatePin(mxconfig.gpio.g2, true, PinOwner::HUB75);
pinManager.allocatePin(mxconfig.gpio.b2, true, PinOwner::HUB75);
pinManager.allocatePin(mxconfig.gpio.lat, true, PinOwner::HUB75);
pinManager.allocatePin(mxconfig.gpio.oe, true, PinOwner::HUB75);
pinManager.allocatePin(mxconfig.gpio.clk, true, PinOwner::HUB75);
pinManager.allocatePin(mxconfig.gpio.a, true, PinOwner::HUB75);
pinManager.allocatePin(mxconfig.gpio.b, true, PinOwner::HUB75);
pinManager.allocatePin(mxconfig.gpio.c, true, PinOwner::HUB75);
pinManager.allocatePin(mxconfig.gpio.d, true, PinOwner::HUB75);
pinManager.allocatePin(mxconfig.gpio.e, true, PinOwner::HUB75);
// display->setLatBlanking(4);
USER_PRINTLN("MatrixPanel_I2S_DMA created");
// let's adjust default brightness
//display->setBrightness8(25); // range is 0-255, 0 - 0%, 255 - 100% // [setBrightness()] Tried to set output brightness before begin()
_bri = 25;
delay(24); // experimental
DEBUG_PRINT(F("heap usage: ")); DEBUG_PRINTLN(int(lastHeap - ESP.getFreeHeap()));
// Allocate memory and start DMA display
if (newDisplay && (display->begin() == false)) {
USER_PRINTLN("****** MatrixPanel_I2S_DMA !KABOOM! I2S memory allocation failed ***********");
USER_PRINT(F("heap usage: ")); USER_PRINTLN(int(lastHeap - ESP.getFreeHeap()));
_valid = false;
return;
}
else {
if (newDisplay) { USER_PRINTLN("MatrixPanel_I2S_DMA begin, started ok"); }
else { USER_PRINTLN("MatrixPanel_I2S_DMA begin, using existing display."); }
USER_PRINT(F("heap usage: ")); USER_PRINTLN(int(lastHeap - ESP.getFreeHeap()));
delay(18); // experiment - give the driver a moment (~ one full frame @ 60hz) to settle
_valid = true;
display->clearScreen(); // initially clear the screen buffer
USER_PRINTLN("MatrixPanel_I2S_DMA clear ok");
if (_ledBuffer) free(_ledBuffer); // should not happen
if (_ledsDirty) free(_ledsDirty); // should not happen
_ledsDirty = (byte*) malloc(getBitArrayBytes(_len)); // create LEDs dirty bits
if (_ledsDirty) setBitArray(_ledsDirty, _len, false); // reset dirty bits
#if defined(CONFIG_IDF_TARGET_ESP32S3) && CONFIG_SPIRAM_MODE_OCT && defined(BOARD_HAS_PSRAM) && (defined(WLED_USE_PSRAM) || defined(WLED_USE_PSRAM_JSON))
if (psramFound()) {
_ledBuffer = (CRGB*) ps_calloc(_len, sizeof(CRGB)); // create LEDs buffer (initialized to BLACK)
} else {
_ledBuffer = (CRGB*) calloc(_len, sizeof(CRGB)); // create LEDs buffer (initialized to BLACK)
}
#else
_ledBuffer = (CRGB*) calloc(_len, sizeof(CRGB)); // create LEDs buffer (initialized to BLACK)
#endif
}
if ((_ledBuffer == nullptr) || (_ledsDirty == nullptr)) {
// fail is we cannot get memory for the buffer
errorFlag = ERR_LOW_MEM; // WLEDMM raise errorflag
USER_PRINTLN(F("MatrixPanel_I2S_DMA not started - not enough memory for leds buffer!"));
cleanup(); // free buffers, and deallocate pins
_valid = false;
USER_PRINT(F("heap usage: ")); USER_PRINTLN(int(lastHeap - ESP.getFreeHeap()));
return; // fail
}
switch(bc.type) {
case 105:
USER_PRINTLN("MatrixPanel_I2S_DMA FOUR_SCAN_32PX_HIGH - 32x32");
if (!fourScanPanel) fourScanPanel = new VirtualMatrixPanel((*display), 1, 1, 32, 32);
fourScanPanel->setPhysicalPanelScanRate(FOUR_SCAN_32PX_HIGH);
fourScanPanel->setRotation(0);
break;
case 106:
USER_PRINTLN("MatrixPanel_I2S_DMA FOUR_SCAN_32PX_HIGH - 64x32");
if (!fourScanPanel) fourScanPanel = new VirtualMatrixPanel((*display), 1, 1, 64, 32);
fourScanPanel->setPhysicalPanelScanRate(FOUR_SCAN_32PX_HIGH);
fourScanPanel->setRotation(0);
break;
case 107:
USER_PRINTLN("MatrixPanel_I2S_DMA FOUR_SCAN_64PX_HIGH");
if (!fourScanPanel) fourScanPanel = new VirtualMatrixPanel((*display), 1, 1, 64, 64);
fourScanPanel->setPhysicalPanelScanRate(FOUR_SCAN_64PX_HIGH);
fourScanPanel->setRotation(0);
break;
case 108: // untested
USER_PRINTLN("MatrixPanel_I2S_DMA 128x64 FOUR_SCAN_64PX_HIGH");
if (!fourScanPanel) fourScanPanel = new VirtualMatrixPanel((*display), 1, 1, 128, 64);
fourScanPanel->setPhysicalPanelScanRate(FOUR_SCAN_64PX_HIGH);
fourScanPanel->setRotation(0);
break;
}
if (_valid) {
_panelWidth = fourScanPanel ? fourScanPanel->width() : display->width(); // cache width - it will never change
}
USER_PRINT(F("MatrixPanel_I2S_DMA "));
USER_PRINTF("%sstarted, width=%u, %u pixels.\n", _valid? "":"not ", _panelWidth, _len);
if (_ledBuffer != nullptr) USER_PRINTLN(F("MatrixPanel_I2S_DMA LEDS buffer enabled."));
if (_ledsDirty != nullptr) USER_PRINTLN(F("MatrixPanel_I2S_DMA LEDS dirty bit optimization enabled."));
if ((_ledBuffer != nullptr) || (_ledsDirty != nullptr)) {
USER_PRINT(F("MatrixPanel_I2S_DMA LEDS buffer uses "));
USER_PRINT((_ledBuffer? _len*sizeof(CRGB) :0) + (_ledsDirty? getBitArrayBytes(_len) :0));
USER_PRINTLN(F(" bytes."));
}
if (_valid) {
// config is active, copy to global
activeType = bc.type;
activeDisplay = display;
activeFourScanPanel = fourScanPanel;
if (newDisplay) memcpy(&activeMXconfig, &mxconfig, sizeof(mxconfig));
}
instanceCount++;
USER_PRINT(F("heap usage: ")); USER_PRINTLN(int(lastHeap - ESP.getFreeHeap()));
}
void __attribute__((hot)) BusHub75Matrix::setPixelColor(uint16_t pix, uint32_t c) {
if (!_valid || pix >= _len) return;
// if (_cct >= 1900) c = colorBalanceFromKelvin(_cct, c); //color correction from CCT
if (_ledBuffer) {
CRGB fastled_col = CRGB(c);
if (_ledBuffer[pix] != fastled_col) {
_ledBuffer[pix] = fastled_col;
setBitInArray(_ledsDirty, pix, true); // flag pixel as "dirty"
}
}
else {
// no double buffer allocated --> directly draw pixel
MatrixPanel_I2S_DMA* display = BusHub75Matrix::activeDisplay;
VirtualMatrixPanel* fourScanPanel = BusHub75Matrix::activeFourScanPanel;
#ifndef NO_CIE1931
c = unGamma24(c); // to use the driver linear brightness feature, we first need to undo WLED gamma correction
#endif
uint8_t r = R(c);
uint8_t g = G(c);
uint8_t b = B(c);
if(fourScanPanel != nullptr) {
int width = _panelWidth;
int x = pix % width;
int y = pix / width;
fourScanPanel->drawPixelRGB888(int16_t(x), int16_t(y), r, g, b);
} else {
int width = _panelWidth;
int x = pix % width;
int y = pix / width;
display->drawPixelRGB888(int16_t(x), int16_t(y), r, g, b);
}
}
}
uint32_t BusHub75Matrix::getPixelColor(uint16_t pix) const {
if (!_valid || pix >= _len) return BLACK;
if (_ledBuffer)
return uint32_t(_ledBuffer[pix].scale8(_bri)) & 0x00FFFFFF; // scale8() is needed to mimic NeoPixelBus, which returns scaled-down colours
else
return BLACK; // we don't know anything about the pixel
}
uint32_t __attribute__((hot)) BusHub75Matrix::getPixelColorRestored(uint16_t pix) const {
if (!_valid || pix >= _len) return BLACK;
if (_ledBuffer)
return uint32_t(_ledBuffer[pix]) & 0x00FFFFFF;
else
return BLACK; // we don't know anything about the pixel
}
void BusHub75Matrix::setBrightness(uint8_t b, bool immediate) {
_bri = b;
if (!_valid) return;
MatrixPanel_I2S_DMA* display = BusHub75Matrix::activeDisplay;
// if (_bri > 238) _bri=238; // not strictly needed. Enable this line if you see glitches at highest brightness.
if ((_bri > 253) && (activeMXconfig.latch_blanking < 2)) _bri=253; // prevent glitches at highest brightness.
if (display) display->setBrightness(_bri);
}
void __attribute__((hot)) BusHub75Matrix::show(void) {
if (!_valid) return;
MatrixPanel_I2S_DMA* display = BusHub75Matrix::activeDisplay;
if (!display) return;
display->setBrightness(_bri);
if (_ledBuffer) {
// write out buffered LEDs
VirtualMatrixPanel* fourScanPanel = BusHub75Matrix::activeFourScanPanel;
bool isFourScan = (fourScanPanel != nullptr);
//if (isFourScan) fourScanPanel->setRotation(0);
unsigned height = isFourScan ? fourScanPanel->height() : display->height();
unsigned width = _panelWidth;
//while(!previousBufferFree) delay(1); // experimental - Wait before we allow any writing to the buffer. Stop flicker.
size_t pix = 0; // running pixel index
for (int y=0; y<height; y++) for (int x=0; x<width; x++) {
if (getBitFromArray(_ledsDirty, pix) == true) { // only repaint the "dirty" pixels
#ifndef NO_CIE1931
uint32_t c = uint32_t(_ledBuffer[pix]) & 0x00FFFFFF; // get RGB color, removing FastLED "alpha" component
c = unGamma24(c); // to use the driver linear brightness feature, we first need to undo WLED gamma correction
uint8_t r = R(c);
uint8_t g = G(c);
uint8_t b = B(c);
#else
const CRGB c = _ledBuffer[pix]; // we stay on CRGB, instead of packing/unpacking the color value to uint32_t
uint8_t r = c.r;
uint8_t g = c.g;
uint8_t b = c.b;
#endif
if (isFourScan) fourScanPanel->drawPixelRGB888(int16_t(x), int16_t(y), r, g, b);
else display->drawPixelRGB888(int16_t(x), int16_t(y), r, g, b);
}
pix ++;
}
setBitArray(_ledsDirty, _len, false); // buffer shown - reset all dirty bits
}
}
void BusHub75Matrix::cleanup() {
MatrixPanel_I2S_DMA* display = BusHub75Matrix::activeDisplay;
VirtualMatrixPanel* fourScanPanel = BusHub75Matrix::activeFourScanPanel;
if (display) display->clearScreen();
#if !defined(CONFIG_IDF_TARGET_ESP32S3) // S3: don't stop, as we want to re-use the driver later
if (display && _valid) display->stopDMAoutput(); // terminate DMA driver (display goes black)
_panelWidth = 0;
USER_PRINTLN("HUB75 output ended.");
#else
USER_PRINTLN("HUB75 output paused.");
#endif
_valid = false;
deallocatePins();
//if (fourScanPanel != nullptr) delete fourScanPanel; // warning: deleting object of polymorphic class type 'VirtualMatrixPanel' which has non-virtual destructor might cause undefined behavior
#if !defined(CONFIG_IDF_TARGET_ESP32S3) // S3: don't delete, as we want to re-use the driver later
if (display) delete display;
activeDisplay = nullptr;
activeFourScanPanel = nullptr;
USER_PRINTLN("HUB75 deleted.");
#else
USER_PRINTLN("HUB75 cleanup done.");
#endif
if (instanceCount > 0) instanceCount--;
if (_ledBuffer != nullptr) free(_ledBuffer); _ledBuffer = nullptr;
if (_ledsDirty != nullptr) free(_ledsDirty); _ledsDirty = nullptr;
}
void BusHub75Matrix::deallocatePins() {
pinManager.deallocatePin(activeMXconfig.gpio.r1, PinOwner::HUB75);
pinManager.deallocatePin(activeMXconfig.gpio.g1, PinOwner::HUB75);
pinManager.deallocatePin(activeMXconfig.gpio.b1, PinOwner::HUB75);
pinManager.deallocatePin(activeMXconfig.gpio.r2, PinOwner::HUB75);
pinManager.deallocatePin(activeMXconfig.gpio.g2, PinOwner::HUB75);
pinManager.deallocatePin(activeMXconfig.gpio.b2, PinOwner::HUB75);
pinManager.deallocatePin(activeMXconfig.gpio.lat, PinOwner::HUB75);
pinManager.deallocatePin(activeMXconfig.gpio.oe, PinOwner::HUB75);
pinManager.deallocatePin(activeMXconfig.gpio.clk, PinOwner::HUB75);
pinManager.deallocatePin(activeMXconfig.gpio.a, PinOwner::HUB75);
pinManager.deallocatePin(activeMXconfig.gpio.b, PinOwner::HUB75);
pinManager.deallocatePin(activeMXconfig.gpio.c, PinOwner::HUB75);
pinManager.deallocatePin(activeMXconfig.gpio.d, PinOwner::HUB75);
pinManager.deallocatePin(activeMXconfig.gpio.e, PinOwner::HUB75);
}
#endif
// ***************************************************************************
//utility to get the approx. memory usage of a given BusConfig
uint32_t BusManager::memUsage(BusConfig &bc) {
uint8_t type = bc.type;
uint16_t len = bc.count + bc.skipAmount;
if (type > 15 && type < 32) { // digital types
if (type == TYPE_UCS8903 || type == TYPE_UCS8904) len *= 2; // 16-bit LEDs
#ifdef ESP8266
if (bc.pins[0] == 3) { //8266 DMA uses 5x the mem
if (type > 28) return len*20; //RGBW
return len*15;
}
if (type > 28) return len*4; //RGBW
return len*3;
#else //ESP32 RMT uses double buffer?
if (type > 28) return len*8; //RGBW
return len*6;
#endif
}
if (type > 31 && type < 48) return 5;
return len*3; //RGB
}
int BusManager::add(BusConfig &bc) {
if (getNumBusses() - getNumVirtualBusses() >= WLED_MAX_BUSSES) return -1;
DEBUG_PRINTF("BusManager::add(bc.type=%u)\n", bc.type);
if (bc.type >= TYPE_NET_DDP_RGB && bc.type < 96) {
busses[numBusses] = new BusNetwork(bc);
} else if (bc.type >= TYPE_HUB75MATRIX && bc.type <= (TYPE_HUB75MATRIX + 10)) {
#ifdef WLED_ENABLE_HUB75MATRIX
DEBUG_PRINTLN("BusManager::add - Adding BusHub75Matrix");
busses[numBusses] = new BusHub75Matrix(bc);
USER_PRINTLN("[BusHub75Matrix] ");
#else
USER_PRINTLN("[unsupported! BusHub75Matrix - add flag -D WLED_ENABLE_HUB75MATRIX] ");
return -1;
#endif
} else if (IS_DIGITAL(bc.type)) {
busses[numBusses] = new BusDigital(bc, numBusses, colorOrderMap);
} else if (bc.type == TYPE_ONOFF) {
busses[numBusses] = new BusOnOff(bc);
} else {
busses[numBusses] = new BusPwm(bc);
}
// WLEDMM clear cached Bus info
lastBus = nullptr;
laststart = 0;
lastend = 0;
return numBusses++;
}
//do not call this method from system context (network callback)
void BusManager::removeAll() {
DEBUG_PRINTLN(F("Removing all."));
//prevents crashes due to deleting busses while in use.
while (!canAllShow()) yield();
for (uint8_t i = 0; i < numBusses; i++) delete busses[i];
numBusses = 0;
// WLEDMM clear cached Bus info
lastBus = nullptr;
laststart = 0;
lastend = 0;
}
void BusManager::show() {
for (uint8_t i = 0; i < numBusses; i++) {
busses[i]->show();
}
}
void BusManager::setStatusPixel(uint32_t c) {
for (uint8_t i = 0; i < numBusses; i++) {
busses[i]->setStatusPixel(c);
}
}
void IRAM_ATTR __attribute__((hot)) BusManager::setPixelColor(uint16_t pix, uint32_t c, int16_t cct) {
if ((pix >= laststart) && (pix < lastend ) && (lastBus != nullptr)) {
// WLEDMM same bus as last time - no need to search again
lastBus->setPixelColor(pix - laststart, c);
return;
}
for (uint_fast8_t i = 0; i < numBusses; i++) { // WLEDMM use fast native types
Bus* b = busses[i];
uint_fast16_t bstart = b->getStart();
if (pix < bstart || pix >= bstart + b->getLength()) continue;
else {
// WLEDMM remember last Bus we took
lastBus = b;
laststart = bstart;
lastend = bstart + b->getLength();
b->setPixelColor(pix - bstart, c);
break; // WLEDMM found the right Bus -> so we can stop searching
}
}
}
void BusManager::setBrightness(uint8_t b, bool immediate) {
for (uint8_t i = 0; i < numBusses; i++) {
busses[i]->setBrightness(b, immediate);
}
}
void __attribute__((cold)) BusManager::setSegmentCCT(int16_t cct, bool allowWBCorrection) {
if (cct > 255) cct = 255;
if (cct >= 0) {
//if white balance correction allowed, save as kelvin value instead of 0-255
if (allowWBCorrection) cct = 1900 + (cct << 5);
} else cct = -1;
Bus::setCCT(cct);
}
uint32_t IRAM_ATTR __attribute__((hot)) BusManager::getPixelColor(uint_fast16_t pix) { // WLEDMM use fast native types, IRAM_ATTR
if ((pix >= laststart) && (pix < lastend ) && (lastBus != nullptr)) {
// WLEDMM same bus as last time - no need to search again
return lastBus->getPixelColor(pix - laststart);
}
for (uint_fast8_t i = 0; i < numBusses; i++) {
Bus* b = busses[i];
uint_fast16_t bstart = b->getStart();
if (pix < bstart || pix >= bstart + b->getLength()) continue;
else {
// WLEDMM remember last Bus we took
lastBus = b;
laststart = bstart;
lastend = bstart + b->getLength();
return b->getPixelColor(pix - bstart);
}
}
return 0;
}
uint32_t IRAM_ATTR __attribute__((hot)) BusManager::getPixelColorRestored(uint_fast16_t pix) { // WLEDMM uses bus::getPixelColorRestored()
if ((pix >= laststart) && (pix < lastend ) && (lastBus != nullptr)) {
// WLEDMM same bus as last time - no need to search again
return lastBus->getPixelColorRestored(pix - laststart);
}
for (uint_fast8_t i = 0; i < numBusses; i++) {
Bus* b = busses[i];
uint_fast16_t bstart = b->getStart();
if (pix < bstart || pix >= bstart + b->getLength()) continue;
else {
// WLEDMM remember last Bus we took
lastBus = b;
laststart = bstart;
lastend = bstart + b->getLength();
return b->getPixelColorRestored(pix - bstart);
}
}
return 0;
}
bool BusManager::canAllShow() const {
for (uint8_t i = 0; i < numBusses; i++) {
if (!busses[i]->canShow()) return false;
}
return true;
}
Bus* BusManager::getBus(uint8_t busNr) const {
if (busNr >= numBusses) return nullptr;
return busses[busNr];
}
//semi-duplicate of strip.getLengthTotal() (though that just returns strip._length, calculated in finalizeInit())
uint16_t BusManager::getTotalLength() const {
uint_fast16_t len = 0;
for (uint_fast8_t i=0; i<numBusses; i++) len += busses[i]->getLength(); // WLEDMM use fast native types
return len;
}
// Bus static member definition
int16_t Bus::_cct = -1;
uint8_t Bus::_cctBlend = 0;
uint8_t Bus::_gAWM = 255;
Reference in New Issue View Git Blame Copy Permalink