2284 lines
109 KiB
INI
2284 lines
109 KiB
INI
; PlatformIO Project Configuration File
|
|
; Please visit documentation: https://docs.platformio.org/page/projectconf.html
|
|
|
|
[platformio]
|
|
# ------------------------------------------------------------------------------
|
|
# ENVIRONMENTS
|
|
#
|
|
# Please uncomment one of the lines below to select your board(s)
|
|
# (use `platformio_override.ini` when building for your own board; see `platformio_override.ini.sample` for an example)
|
|
# ------------------------------------------------------------------------------
|
|
|
|
# CI binaries
|
|
;; default_envs = nodemcuv2, esp8266_2m, esp01_1m_full, esp32dev, esp32_eth # ESP32 variant builds are temporarily excluded from CI due to toolchain issues on the GitHub Actions Linux environment
|
|
; default_envs = nodemcuv2, esp8266_2m, esp01_1m_full, esp32dev, esp32_eth, esp32dev_audioreactive, lolin_s2_mini, esp32c3dev, esp32s3dev_8MB, esp32s3dev_8MB_PSRAM_opi
|
|
|
|
# Release binaries
|
|
; default_envs = nodemcuv2, esp8266_2m, esp01_1m_full, esp32dev, esp32_eth, lolin_s2_mini, esp32c3dev, esp32s3dev_8MB
|
|
|
|
# Build everything
|
|
; default_envs = esp32dev, esp8285_4CH_MagicHome, codm-controller-0_6-rev2, codm-controller-0_6, esp32s2_saola, d1_mini_5CH_Shojo_PCB, d1_mini, sp501e, nodemcuv2, esp32_eth, anavi_miracle_controller, esp07, esp01_1m_full, m5atom, h803wf, d1_mini_ota, heltec_wifi_kit_8, esp8285_H801, d1_mini_debug, wemos_shield_esp32, elekstube_ips
|
|
|
|
# Single binaries (uncomment your board)
|
|
; default_envs = elekstube_ips
|
|
; default_envs = nodemcuv2
|
|
; default_envs = esp8266_2m
|
|
; default_envs = esp01_1m_full
|
|
; default_envs = esp07
|
|
; default_envs = d1_mini
|
|
; default_envs = heltec_wifi_kit_8
|
|
; default_envs = h803wf
|
|
; default_envs = d1_mini_debug
|
|
; default_envs = d1_mini_ota
|
|
; default_envs = esp32dev
|
|
; default_envs = esp8285_4CH_MagicHome
|
|
; default_envs = esp8285_H801
|
|
; default_envs = d1_mini_5CH_Shojo_PCB
|
|
; default_envs = wemos_shield_esp32
|
|
; default_envs = m5atom
|
|
; default_envs = esp32_eth
|
|
; default_envs = esp32dev_qio80
|
|
; default_envs = esp32_eth_ota1mapp
|
|
; default_envs = esp32s2_saola
|
|
; default_envs = esp32c3dev
|
|
; default_envs = lolin_s2_mini
|
|
; default_envs = esp32s3dev_16MB_PSRAM_opi
|
|
|
|
; MoonModules entries
|
|
; ===================
|
|
|
|
default_envs =
|
|
esp32_4MB_S ;; experimental, optimized for speed
|
|
esp32_4MB_M ;; esp32 recommended default
|
|
esp32_4MB_M_eth
|
|
esp32_4MB_M_debug
|
|
esp32_4MB_XL
|
|
; esp32_16MB_S ;; experimental, optimized for speed
|
|
esp32_16MB_M ;; esp32 recommended for boards with 16MB flash
|
|
; esp32_16MB_M_debug
|
|
; esp32_16MB_XL
|
|
esp8266_2MB_S
|
|
esp8266_4MB_S ;; recommended for 8266 with audio sync
|
|
esp8266_4MB_M
|
|
wemos_shield_esp32_4MB_M
|
|
; wemos_shield_esp32_4MB_ICS4343x_M
|
|
; wemos_shield_esp32_4MB_SPM1423_M
|
|
; wemos_shield_esp32_4MB_LineIn_M
|
|
; wemos_shield_esp32_16MB_M
|
|
; wemos_shield_esp32_16MB_ICS4343x_M
|
|
; wemos_shield_esp32_16MB_SPM1423_M
|
|
; wemos_shield_esp32_16MB_SPM1423_XL
|
|
; wemos_shield_esp32_16MB_LineIn_M
|
|
esp32_pico_4MB_M
|
|
esp32_4MB_PSRAM_S
|
|
; esp32_4MB_PSRAM_REV3_S ;; experimental, optimized for WROVER-E with "revision3" chip
|
|
esp32S3_8MB_S ;; experimental, optimized for speed
|
|
esp32S3_8MB_M
|
|
;; esp32S3_8MB_PSRAM_M ;; experiemental
|
|
;; esp32s2_tinyUF2_PSRAM_S ;; experimental - only for adafruit -S2 boards with tinyUF2 bootloader !!!
|
|
esp32s2_PSRAM_M ;; experimental
|
|
esp32c3dev_4MB_M ;; experimental
|
|
esp32c3mini_dio_4MB_M ;; for boards that need "dio" flash mode (instead of qio)
|
|
seeed_esp32c3_4MB_S ;; experimental
|
|
esp32_4MB_V4_S ;; experimental
|
|
esp32_16MB_V4_S ;; experimental, optimized for speed
|
|
esp32_16MB_V4_M ;; experimental
|
|
esp32_16MB_V4_M_debug ;; experimental
|
|
esp32_pico_4MB_V4_S ;; experimental - may work better in case you experience wifi connectivity problems
|
|
esp8266pro_16MB_S
|
|
esp8266pro_16MB_M
|
|
esp01_1MB_S
|
|
esp32_16MB_M_eth
|
|
athom_music_esp32_4MB_M
|
|
|
|
; Go to MoonModules environments for environments
|
|
|
|
src_dir = ./wled00
|
|
data_dir = ./wled00/data
|
|
build_cache_dir = ~/.platformio/buildcache
|
|
extra_configs =
|
|
platformio_override.ini
|
|
|
|
[common]
|
|
# ------------------------------------------------------------------------------
|
|
# PLATFORM:
|
|
# !! DO NOT confuse platformio's ESP8266 development platform with Arduino core for ESP8266
|
|
#
|
|
# arduino core 2.6.3 = platformIO 2.3.2
|
|
# arduino core 2.7.0 = platformIO 2.5.0
|
|
# ------------------------------------------------------------------------------
|
|
arduino_core_2_6_3 = espressif8266@2.3.3
|
|
arduino_core_2_7_4 = espressif8266@2.6.2
|
|
arduino_core_3_0_0 = espressif8266@3.0.0
|
|
arduino_core_3_2_0 = espressif8266@3.2.0
|
|
arduino_core_4_1_0 = espressif8266@4.1.0
|
|
arduino_core_3_1_2 = espressif8266@4.2.0
|
|
|
|
# Development platforms
|
|
arduino_core_develop = https://github.com/platformio/platform-espressif8266#develop
|
|
arduino_core_git = https://github.com/platformio/platform-espressif8266#feature/stage
|
|
|
|
# Platform to use for ESP8266
|
|
platform_wled_default = ${common.arduino_core_3_1_2}
|
|
# We use 2.7.4.7 for all, includes PWM flicker fix and Wstring optimization
|
|
#platform_packages = tasmota/framework-arduinoespressif8266 @ 3.20704.7
|
|
platform_packages = platformio/framework-arduinoespressif8266
|
|
platformio/toolchain-xtensa @ ~2.100300.220621 #2.40802.200502
|
|
platformio/tool-esptool #@ ~1.413.0
|
|
platformio/tool-esptoolpy #@ ~1.30000.0
|
|
|
|
## previous platform for 8266, in case of problems with the new one
|
|
## you'll need makuna/NeoPixelBus@ 2.6.9 for arduino_core_3_2_0, which does not support Ucs890x
|
|
;; platform_wled_default = ${common.arduino_core_3_2_0}
|
|
;; platform_packages = tasmota/framework-arduinoespressif8266 @ 3.20704.7
|
|
;; platformio/toolchain-xtensa @ ~2.40802.200502
|
|
;; platformio/tool-esptool @ ~1.413.0
|
|
;; platformio/tool-esptoolpy @ ~1.30000.0
|
|
|
|
# ------------------------------------------------------------------------------
|
|
# FLAGS: DEBUG
|
|
# esp8266 : see https://docs.platformio.org/en/latest/platforms/espressif8266.html#debug-level
|
|
# esp32 : see https://docs.platformio.org/en/latest/platforms/espressif32.html#debug-level
|
|
# ------------------------------------------------------------------------------
|
|
debug_flags = -D DEBUG=1 -D WLED_DEBUG
|
|
-DDEBUG_ESP_WIFI -DDEBUG_ESP_HTTP_CLIENT -DDEBUG_ESP_HTTP_UPDATE -DDEBUG_ESP_HTTP_SERVER -DDEBUG_ESP_UPDATER -DDEBUG_ESP_OTA -DDEBUG_TLS_MEM ;; for esp8266
|
|
-DARDUINOJSON_DEBUG=1 ;; WLEDMM: this enables some debug asserts in arduinoJSON
|
|
# if needed (for memleaks etc) also add; -DDEBUG_ESP_OOM -include "umm_malloc/umm_malloc_cfg.h"
|
|
# -DDEBUG_ESP_CORE is not working right now
|
|
|
|
# ------------------------------------------------------------------------------
|
|
# FLAGS: ldscript (available ldscripts at https://github.com/esp8266/Arduino/tree/master/tools/sdk/ld)
|
|
# ldscript_2m1m (2048 KB) = 1019 KB sketch, 4 KB eeprom, 1004 KB spiffs, 16 KB reserved
|
|
# ldscript_4m1m (4096 KB) = 1019 KB sketch, 4 KB eeprom, 1002 KB spiffs, 16 KB reserved, 2048 KB empty/ota?
|
|
#
|
|
# Available lwIP variants (macros):
|
|
# -DPIO_FRAMEWORK_ARDUINO_LWIP_HIGHER_BANDWIDTH = v1.4 Higher Bandwidth (default)
|
|
# -DPIO_FRAMEWORK_ARDUINO_LWIP2_LOW_MEMORY = v2 Lower Memory
|
|
# -DPIO_FRAMEWORK_ARDUINO_LWIP2_HIGHER_BANDWIDTH = v2 Higher Bandwidth
|
|
# -DPIO_FRAMEWORK_ARDUINO_LWIP2_HIGHER_BANDWIDTH_LOW_FLASH
|
|
#
|
|
# BearSSL performance:
|
|
# When building with -DSECURE_CLIENT=SECURE_CLIENT_BEARSSL, please add `board_build.f_cpu = 160000000` to the environment configuration
|
|
#
|
|
# BearSSL ciphers:
|
|
# When building on core >= 2.5, you can add the build flag -DBEARSSL_SSL_BASIC in order to build BearSSL with a limited set of ciphers:
|
|
# TLS_RSA_WITH_AES_128_CBC_SHA256 / AES128-SHA256
|
|
# TLS_RSA_WITH_AES_256_CBC_SHA256 / AES256-SHA256
|
|
# TLS_RSA_WITH_AES_128_CBC_SHA / AES128-SHA
|
|
# TLS_RSA_WITH_AES_256_CBC_SHA / AES256-SHA
|
|
# This reduces the OTA size with ~45KB, so it's especially useful on low memory boards (512k/1m).
|
|
# ------------------------------------------------------------------------------
|
|
build_flags =
|
|
-Wno-attributes
|
|
-DMQTT_MAX_PACKET_SIZE=1024
|
|
-DSECURE_CLIENT=SECURE_CLIENT_BEARSSL
|
|
-DBEARSSL_SSL_BASIC
|
|
-D CORE_DEBUG_LEVEL=0
|
|
;; WLEDMM espressif docs say NDEBUG is not recommended. see https://docs.espressif.com/projects/esp-idf/en/v4.4.4/esp32/api-guides/performance/speed.html#not-recommended
|
|
-D NDEBUG ;; however it seems neecessary for non-V4 builds, to avoid spurious "assert" crashes inside the wifi core.
|
|
-Wno-attributes ;; silence warnings about unknown attribute 'maybe_unused' in NeoPixelBus
|
|
#build_flags for the IRremoteESP8266 library (enabled decoders have to appear here)
|
|
-D _IR_ENABLE_DEFAULT_=false
|
|
-D DECODE_HASH=true
|
|
-D DECODE_NEC=true
|
|
-D DECODE_SONY=true
|
|
-D DECODE_SAMSUNG=true
|
|
-D DECODE_LG=true
|
|
;-Dregister= # remove warnings in C++17 due to use of deprecated register keyword by the FastLED library ;; warning: this breaks framework code on ESP32-C3 and ESP32-S2
|
|
-DWLED_USE_MY_CONFIG
|
|
; -D USERMOD_SENSORSTOMQTT
|
|
#For ADS1115 sensor uncomment following
|
|
; -D USERMOD_ADS1115
|
|
|
|
build_unflags =
|
|
|
|
build_flags_esp8266 = ${common.build_flags} ${esp8266.build_flags}
|
|
build_flags_esp32 = ${common.build_flags} ${esp32.build_flags}
|
|
build_flags_esp32_V4= ${common.build_flags} ${esp32_idf_V4.build_flags}
|
|
|
|
ldscript_1m128k = eagle.flash.1m128.ld
|
|
ldscript_2m512k = eagle.flash.2m512.ld
|
|
ldscript_2m1m = eagle.flash.2m1m.ld
|
|
ldscript_4m1m = eagle.flash.4m1m.ld
|
|
|
|
;; WLEDMM: additional partion layouts for 8266 "pro" with 8MB or 16MB. On 8266 the max program size is always 1MB
|
|
ldscript_auto = eagle.flash.auto.ld
|
|
ldscript_8m6m = eagle.flash.8m6m.ld
|
|
ldscript_16m14m = eagle.flash.16m14m.ld
|
|
|
|
[scripts_defaults]
|
|
extra_scripts =
|
|
pre:pio-scripts/set_version.py
|
|
post:pio-scripts/output_bins.py
|
|
post:pio-scripts/strip-floats.py
|
|
pre:pio-scripts/user_config_copy.py
|
|
|
|
# ------------------------------------------------------------------------------
|
|
# COMMON SETTINGS:
|
|
# ------------------------------------------------------------------------------
|
|
[env]
|
|
framework = arduino
|
|
board_build.flash_mode = dout
|
|
monitor_speed = 115200
|
|
# slow upload speed (comment this out with a ';' when building for development use)
|
|
upload_speed = 115200
|
|
# fast upload speed (remove ';' when building for development use)
|
|
; upload_speed = 921600
|
|
|
|
# ------------------------------------------------------------------------------
|
|
# LIBRARIES: required dependencies
|
|
# Please note that we don't always use the latest version of a library.
|
|
#
|
|
# The following libraries have been included (and some of them changed) in the source:
|
|
# ArduinoJson@5.13.5, E131@1.0.0(changed), Time@1.5, Timezone@1.2.1
|
|
# ------------------------------------------------------------------------------
|
|
lib_compat_mode = strict
|
|
lib_deps =
|
|
fastled/FastLED @ 3.6.0
|
|
IRremoteESP8266 @ 2.8.2
|
|
;;makuna/NeoPixelBus @ 2.7.5 ;; WLEDMM will be added in board specific sections
|
|
;;https://github.com/Aircoookie/ESPAsyncWebServer.git @ ~2.0.7
|
|
https://github.com/lost-hope/ESPAsyncWebServer.git#master ;; WLEDMM to display .log and .wled files in /edit
|
|
#For use of the TTGO T-Display ESP32 Module with integrated TFT display uncomment the following line
|
|
#TFT_eSPI
|
|
#For compatible OLED display uncomment following
|
|
#U8g2 #@ ~2.33.15
|
|
#For Dallas sensor uncomment following
|
|
#OneWire @ ~2.3.7
|
|
#For BME280 sensor uncomment following
|
|
#BME280 @ ~3.0.0
|
|
; adafruit/Adafruit BMP280 Library @ 2.1.0
|
|
; adafruit/Adafruit CCS811 Library @ 1.0.4
|
|
; adafruit/Adafruit Si7021 Library @ 1.4.0
|
|
#For ADS1115 sensor uncomment following
|
|
; adafruit/Adafruit BusIO @ 1.13.2
|
|
; adafruit/Adafruit ADS1X15 @ 2.4.0
|
|
|
|
extra_scripts = ${scripts_defaults.extra_scripts}
|
|
|
|
[esp8266]
|
|
build_flags =
|
|
-DESP8266
|
|
-DFP_IN_IROM
|
|
;-Wno-deprecated-declarations
|
|
;-Wno-register ;; leaves some warnings when compiling C files: command-line option '-Wno-register' is valid for C++/ObjC++ but not for C
|
|
;-Dregister= # remove warnings in C++17 due to use of deprecated register keyword by the FastLED library ;; warning: this can be dangerous
|
|
-Wno-misleading-indentation
|
|
; NONOSDK22x_190703 = 2.2.2-dev(38a443e)
|
|
-DPIO_FRAMEWORK_ARDUINO_ESPRESSIF_SDK22x_190703
|
|
; lwIP 2 - Higher Bandwidth no Features
|
|
; -DPIO_FRAMEWORK_ARDUINO_LWIP2_HIGHER_BANDWIDTH_LOW_FLASH
|
|
; lwIP 1.4 - Higher Bandwidth (Aircoookie has)
|
|
-DPIO_FRAMEWORK_ARDUINO_LWIP_HIGHER_BANDWIDTH
|
|
; VTABLES in Flash
|
|
-DVTABLES_IN_FLASH
|
|
; restrict to minimal mime-types
|
|
-DMIMETYPE_MINIMAL
|
|
; other special-purpose framework flags (see https://docs.platformio.org/en/latest/platforms/espressif8266.html)
|
|
; -D PIO_FRAMEWORK_ARDUINO_MMU_CACHE16_IRAM48 ;; in case of linker errors like "section `.text1' will not fit in region `iram1_0_seg'"
|
|
; -D PIO_FRAMEWORK_ARDUINO_MMU_CACHE16_IRAM48_SECHEAP_SHARED ;; (experimental) adds some extra heap, but may cause slowdown
|
|
-D USERMOD_AUDIOREACTIVE
|
|
|
|
lib_deps =
|
|
#https://github.com/lorol/LITTLEFS.git
|
|
ESPAsyncTCP @ 1.2.2
|
|
ESPAsyncUDP
|
|
;; makuna/NeoPixelBus @ 2.6.9 ;; WLEDMM use if you have problems with 2.7.5
|
|
makuna/NeoPixelBus @ 2.7.5
|
|
${env.lib_deps}
|
|
|
|
[esp32]
|
|
#platform = https://github.com/tasmota/platform-espressif32/releases/download/v2.0.2.3/platform-espressif32-2.0.2.3.zip
|
|
platform = espressif32@3.5.0
|
|
|
|
platform_packages = framework-arduinoespressif32 @ https://github.com/Aircoookie/arduino-esp32.git#1.0.6.4
|
|
|
|
build_flags = -g
|
|
-DARDUINO_ARCH_ESP32
|
|
#-DCONFIG_LITTLEFS_FOR_IDF_3_2
|
|
-D CONFIG_ASYNC_TCP_USE_WDT=0
|
|
-D CONFIG_ASYNC_TCP_TASK_STACK_SIZE=9472 ;; WLEDMM increase stack by 1.25Kb, as audioreactive needs bigger SETTINGS_STACK_BUF_SIZE
|
|
#use LITTLEFS library by lorol in ESP32 core 1.x.x instead of built-in in 2.x.x
|
|
-D LOROL_LITTLEFS
|
|
; -DARDUINO_USB_CDC_ON_BOOT=0 ;; this flag is mandatory for "classic ESP32" when building with arduino-esp32 >=2.0.3
|
|
|
|
default_partitions = tools/WLED_ESP32_4MB_1MB_FS.csv ;; WLED standard for 4MB flash: 1.4MB firmware, 1MB filesystem
|
|
;default_partitions = tools/WLED_ESP32_4MB_256KB_FS.csv ;; WLEDMM alternative for 4MB flash: 1.8MB firmware, 256KB filesystem (esptool erase_flash needed before changing)
|
|
|
|
lib_deps =
|
|
https://github.com/pbolduc/AsyncTCP.git @ 1.2.0 ;; WLEDMM this must be first in the list, otherwise Aircoookie/ESPAsyncWebServer pulls in an older version of AsyncTCP !!
|
|
; https://github.com/lorol/LITTLEFS.git
|
|
; WLEDMM specific: use patched version of lorol LittleFS
|
|
https://github.com/softhack007/LITTLEFS-threadsafe.git#master
|
|
makuna/NeoPixelBus @ 2.7.5
|
|
${env.lib_deps}
|
|
|
|
;; WLEDMM begin
|
|
|
|
;; ** For compiling with latest Frameworks (IDF4.4.x and arduino-esp32 v2.0.x) **
|
|
;;; previous standard V4 platform
|
|
platformV4_pre = espressif32@5.2.0
|
|
platformV4_packages_pre =
|
|
toolchain-riscv32-esp @ 8.4.0+2021r2-patch5 ; required for platform version < 5.3.0, remove this line when upgrading to platform >=5.3.0
|
|
;;; standard V4 platform
|
|
platformV4 = espressif32@5.3.0
|
|
platformV4_packages =
|
|
|
|
;;; experimental: latest V4 platform with latest arduino-esp32 2.0.9 + ESP-IDF 4.4.4 (may or may not work)
|
|
platformV4_xp = espressif32@ ~6.4.0
|
|
platformV4_packages_xp = platformio/framework-arduinoespressif32 @ ~3.20009.0 ;; arduino-esp32 v2.0.9+
|
|
;; platformV4_packages_xp = platformio/framework-arduinoespressif32 @ ~3.20011.0 ;; arduino-esp32 v2.0.11 (latest one supported in platformio)
|
|
|
|
build_flagsV4 = -g
|
|
-DARDUINO_ARCH_ESP32 -DESP32
|
|
-DCONFIG_LITTLEFS_FOR_IDF_3_2 -DLFS_THREADSAFE
|
|
-D CONFIG_ASYNC_TCP_USE_WDT=0
|
|
-D CONFIG_ASYNC_TCP_TASK_STACK_SIZE=9472 ;; WLEDMM increase stack by 1.25Kb, as audioreactive needs bigger SETTINGS_STACK_BUF_SIZE
|
|
; -DARDUINO_USB_CDC_ON_BOOT=0 ;; mandatory for "classic ESP32" when building with arduino-esp32 >=2.0.3
|
|
;;; V4.4.x libraries (without LOROL_LITTLEFS; with newer NeoPixelBus)
|
|
lib_depsV4 =
|
|
https://github.com/pbolduc/AsyncTCP.git @ 1.2.0 ;; WLEDMM this must be first in the list, otherwise Aircoookie/ESPAsyncWebServer pulls in an older version of AsyncTCP !!
|
|
makuna/NeoPixelBus @ 2.7.5
|
|
${env.lib_deps}
|
|
|
|
;; WLEDMM end
|
|
|
|
[esp32_idf_V4]
|
|
;; experimental build environment for ESP32 using ESP-IDF 4.4.x / arduino-esp32 v2.0.5
|
|
;; very similar to the normal ESP32 flags, but omitting Lorol LittleFS, as littlefs is included in the new framework already.
|
|
;;
|
|
;; please note that you can NOT update existing ESP32 installs with a "V4" build. Also updating by OTA will not work properly.
|
|
;; You need to completely erase your device (esptool erase_flash) first, then install the "V4" build from VSCode+platformio.
|
|
platform = espressif32@5.3.0
|
|
platform_packages =
|
|
build_flags = -g
|
|
-Wshadow=compatible-local ;; emit warning in case a local variable "shadows" another local one
|
|
-DARDUINO_ARCH_ESP32 -DESP32
|
|
#-DCONFIG_LITTLEFS_FOR_IDF_3_2
|
|
-D CONFIG_ASYNC_TCP_USE_WDT=0
|
|
-D CONFIG_ASYNC_TCP_TASK_STACK_SIZE=9472 ;; WLEDMM increase stack by 1.25Kb, as audioreactive needs bigger SETTINGS_STACK_BUF_SIZE
|
|
-DARDUINO_USB_CDC_ON_BOOT=0 ;; this flag is mandatory for "classic ESP32" when building with arduino-esp32 >=2.0.3
|
|
default_partitions = tools/WLED_ESP32_4MB_1MB_FS.csv
|
|
lib_deps =
|
|
https://github.com/pbolduc/AsyncTCP.git @ 1.2.0
|
|
makuna/NeoPixelBus @ 2.7.5
|
|
${env.lib_deps}
|
|
|
|
[esp32s2]
|
|
;; generic definitions for all ESP32-S2 boards
|
|
platform = espressif32@5.2.0
|
|
platform_packages =
|
|
toolchain-riscv32-esp @ 8.4.0+2021r2-patch5
|
|
toolchain-xtensa-esp32s2 @ 8.4.0+2021r2-patch5
|
|
build_flags = -g
|
|
-DARDUINO_ARCH_ESP32 -DESP32 ;; WLEDMM
|
|
-DARDUINO_ARCH_ESP32S2
|
|
-DCONFIG_IDF_TARGET_ESP32S2=1
|
|
-DCONFIG_LITTLEFS_FOR_IDF_3_2 -DLFS_THREADSAFE ;; WLEDMM
|
|
-D CONFIG_ASYNC_TCP_USE_WDT=0
|
|
-D CONFIG_ASYNC_TCP_TASK_STACK_SIZE=8614 ;; WLEDMM increase stack by 1Kb, as audioreactive needs bigger SETTINGS_STACK_BUF_SIZE
|
|
-DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_USB_DFU_ON_BOOT=0
|
|
-DCO
|
|
-DARDUINO_USB_MODE=0 ;; this flag is mandatory for ESP32-S2 !
|
|
;; please make sure that the following flags are properly set (to 0 or 1) by your board.json, or included in your custom platformio_override.ini entry:
|
|
;; ARDUINO_USB_CDC_ON_BOOT
|
|
|
|
lib_deps =
|
|
https://github.com/pbolduc/AsyncTCP.git @ 1.2.0
|
|
makuna/NeoPixelBus @ 2.7.5
|
|
${env.lib_deps}
|
|
|
|
[esp32c3]
|
|
;; generic definitions for all ESP32-C3 boards
|
|
platform = espressif32@5.3.0
|
|
platform_packages =
|
|
build_flags = -g
|
|
-DARDUINO_ARCH_ESP32 -DESP32 ;; WLEDMM
|
|
-DARDUINO_ARCH_ESP32C3
|
|
-DCONFIG_IDF_TARGET_ESP32C3=1
|
|
-DCONFIG_LITTLEFS_FOR_IDF_3_2 -DLFS_THREADSAFE ;; WLEDMM
|
|
-D CONFIG_ASYNC_TCP_USE_WDT=0
|
|
-D CONFIG_ASYNC_TCP_TASK_STACK_SIZE=9472 ;; WLEDMM increase stack by 1.25Kb, as audioreactive needs bigger SETTINGS_STACK_BUF_SIZE
|
|
-DCO
|
|
-DARDUINO_USB_MODE=1 ;; this flag is mandatory for ESP32-C3
|
|
;; please make sure that the following flags are properly set (to 0 or 1) by your board.json, or included in your custom platformio_override.ini entry:
|
|
;; ARDUINO_USB_CDC_ON_BOOT
|
|
|
|
lib_deps =
|
|
https://github.com/pbolduc/AsyncTCP.git @ 1.2.0
|
|
makuna/NeoPixelBus @ 2.7.5
|
|
${env.lib_deps}
|
|
|
|
[esp32s3]
|
|
;; generic definitions for all ESP32-S3 boards
|
|
platform = espressif32@5.3.0
|
|
platform_packages =
|
|
build_flags = -g
|
|
-DESP32
|
|
-DARDUINO_ARCH_ESP32
|
|
-DARDUINO_ARCH_ESP32S3
|
|
-DCONFIG_IDF_TARGET_ESP32S3=1
|
|
-DCONFIG_LITTLEFS_FOR_IDF_3_2 -DLFS_THREADSAFE ;; WLEDMM
|
|
-D CONFIG_ASYNC_TCP_USE_WDT=0
|
|
-D CONFIG_ASYNC_TCP_TASK_STACK_SIZE=9472 ;; WLEDMM increase stack by 1.25Kb, as audioreactive needs bigger SETTINGS_STACK_BUF_SIZE
|
|
-DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_DFU_ON_BOOT=0
|
|
-DCO
|
|
;; please make sure that the following flags are properly set (to 0 or 1) by your board.json, or included in your custom platformio_override.ini entry:
|
|
;; ARDUINO_USB_MODE, ARDUINO_USB_CDC_ON_BOOT
|
|
|
|
lib_deps =
|
|
https://github.com/pbolduc/AsyncTCP.git @ 1.2.0
|
|
makuna/NeoPixelBus @ 2.7.5
|
|
${env.lib_deps}
|
|
|
|
|
|
# ------------------------------------------------------------------------------
|
|
# WLED BUILDS
|
|
# ------------------------------------------------------------------------------
|
|
|
|
[env:nodemcuv2]
|
|
board = nodemcuv2
|
|
platform = ${common.platform_wled_default}
|
|
platform_packages = ${common.platform_packages}
|
|
board_build.ldscript = ${common.ldscript_4m1m}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP8266 #-DWLED_DISABLE_2D
|
|
lib_deps = ${esp8266.lib_deps}
|
|
monitor_filters = esp8266_exception_decoder
|
|
|
|
[env:esp8266_2m]
|
|
board = esp_wroom_02
|
|
platform = ${common.platform_wled_default}
|
|
platform_packages = ${common.platform_packages}
|
|
board_build.ldscript = ${common.ldscript_2m512k}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP02
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
;WLEDMM: see below
|
|
; [env:esp01_1m_full]
|
|
; board = esp01_1m
|
|
; platform = ${common.platform_wled_default}
|
|
; platform_packages = ${common.platform_packages}
|
|
; board_build.ldscript = ${common.ldscript_1m128k}
|
|
; build_unflags = ${common.build_unflags}
|
|
; build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP01 -D WLED_DISABLE_OTA
|
|
; ; -D WLED_USE_UNREAL_MATH ;; may cause wrong sunset/sunrise times, but saves 7064 bytes FLASH and 975 bytes RAM
|
|
; lib_deps = ${esp8266.lib_deps}
|
|
|
|
[env:esp07]
|
|
board = esp07
|
|
platform = ${common.platform_wled_default}
|
|
platform_packages = ${common.platform_packages}
|
|
board_build.ldscript = ${common.ldscript_4m1m}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags_esp8266}
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
[env:d1_mini]
|
|
board = d1_mini
|
|
platform = ${common.platform_wled_default}
|
|
platform_packages = ${common.platform_packages}
|
|
upload_speed = 921600
|
|
board_build.ldscript = ${common.ldscript_4m1m}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags_esp8266}
|
|
lib_deps = ${esp8266.lib_deps}
|
|
monitor_filters = esp8266_exception_decoder
|
|
|
|
[env:heltec_wifi_kit_8]
|
|
board = d1_mini
|
|
platform = ${common.platform_wled_default}
|
|
platform_packages = ${common.platform_packages}
|
|
board_build.ldscript = ${common.ldscript_4m1m}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags_esp8266}
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
[env:h803wf]
|
|
board = d1_mini
|
|
platform = ${common.platform_wled_default}
|
|
platform_packages = ${common.platform_packages}
|
|
board_build.ldscript = ${common.ldscript_4m1m}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags_esp8266} -D LEDPIN=1 -D WLED_DISABLE_INFRARED
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
[env:esp32dev]
|
|
board = esp32dev
|
|
platform = ${esp32.platform}
|
|
platform_packages = ${esp32.platform_packages}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags_esp32} -D WLED_RELEASE_NAME=ESP32 #-D WLED_DISABLE_BROWNOUT_DET
|
|
lib_deps = ${esp32.lib_deps}
|
|
monitor_filters = esp32_exception_decoder
|
|
board_build.partitions = ${esp32.default_partitions}
|
|
|
|
;WLEDMM: use WLEDMM build environments
|
|
; [env:esp32dev_audioreactive]
|
|
; board = esp32dev
|
|
; platform = ${esp32.platform}
|
|
; platform_packages = ${esp32.platform_packages}
|
|
; build_unflags = ${common.build_unflags}
|
|
; build_flags = ${common.build_flags_esp32} -D WLED_RELEASE_NAME=ESP32_audioreactive #-D WLED_DISABLE_BROWNOUT_DET
|
|
; ${esp32.AR_build_flags}
|
|
; lib_deps = ${esp32.lib_deps}
|
|
; ${esp32.AR_lib_deps}
|
|
; monitor_filters = esp32_exception_decoder
|
|
; board_build.partitions = ${esp32.default_partitions}
|
|
; ; board_build.f_flash = 80000000L
|
|
; ; board_build.flash_mode = dio
|
|
|
|
[env:esp32dev_qio80]
|
|
board = esp32dev
|
|
platform = ${esp32.platform}
|
|
platform_packages = ${esp32.platform_packages}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags_esp32} -D WLED_RELEASE_NAME=ESP32_qio80 #-D WLED_DISABLE_BROWNOUT_DET
|
|
lib_deps = ${esp32.lib_deps}
|
|
monitor_filters = esp32_exception_decoder
|
|
board_build.partitions = ${esp32.default_partitions}
|
|
board_build.f_flash = 80000000L
|
|
board_build.flash_mode = qio
|
|
|
|
[env:esp32dev_V4_dio80]
|
|
;; experimental ESP32 env using ESP-IDF V4.4.x
|
|
;; Warning: this build environment is not stable!!
|
|
;; please erase your device before installing.
|
|
board = esp32dev
|
|
platform = ${esp32_idf_V4.platform}
|
|
platform_packages = ${esp32_idf_V4.platform_packages}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags} ${esp32_idf_V4.build_flags} -D WLED_RELEASE_NAME=ESP32_V4_qio80 #-D WLED_DISABLE_BROWNOUT_DET
|
|
lib_deps = ${esp32_idf_V4.lib_deps}
|
|
monitor_filters = esp32_exception_decoder
|
|
board_build.partitions = ${esp32_idf_V4.default_partitions}
|
|
board_build.f_flash = 80000000L
|
|
board_build.flash_mode = dio
|
|
|
|
[env:esp32_eth]
|
|
board = esp32-poe
|
|
platform = ${esp32.platform}
|
|
platform_packages = ${esp32.platform_packages}
|
|
upload_speed = 921600
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags_esp32} -D WLED_RELEASE_NAME=ESP32_Ethernet -D RLYPIN=-1 -D WLED_USE_ETHERNET -D BTNPIN=-1
|
|
-D WLED_DISABLE_ESPNOW ;; ESP-NOW requires wifi, may crash with ethernet only
|
|
lib_deps = ${esp32.lib_deps}
|
|
board_build.partitions = ${esp32.default_partitions}
|
|
|
|
[env:esp32s2_saola]
|
|
board = esp32-s2-saola-1
|
|
platform = https://github.com/tasmota/platform-espressif32/releases/download/v2.0.2.2/platform-tasmota-espressif32-2.0.2.zip
|
|
platform_packages =
|
|
framework = arduino
|
|
board_build.partitions = tools/WLED_ESP32_4MB_1MB_FS.csv
|
|
board_build.flash_mode = qio
|
|
upload_speed = 460800
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags} ${esp32s2.build_flags} #-D WLED_RELEASE_NAME=S2_saola
|
|
;-DLOLIN_WIFI_FIX ;; try this in case Wifi does not work
|
|
-DARDUINO_USB_CDC_ON_BOOT=1
|
|
lib_deps = ${esp32s2.lib_deps}
|
|
|
|
[env:esp32c3dev]
|
|
extends = esp32c3
|
|
platform = ${esp32c3.platform}
|
|
platform_packages = ${esp32c3.platform_packages}
|
|
framework = arduino
|
|
board = esp32-c3-devkitm-1
|
|
board_build.partitions = tools/WLED_ESP32_4MB_1MB_FS.csv
|
|
build_flags = ${common.build_flags} ${esp32c3.build_flags} -D WLED_RELEASE_NAME=ESP32-C3
|
|
-D WLED_WATCHDOG_TIMEOUT=0
|
|
-DLOLIN_WIFI_FIX ; seems to work much better with this
|
|
-DARDUINO_USB_CDC_ON_BOOT=1 ;; for virtual CDC USB
|
|
;-DARDUINO_USB_CDC_ON_BOOT=0 ;; for serial-to-USB chip
|
|
upload_speed = 460800
|
|
build_unflags = ${common.build_unflags}
|
|
lib_deps = ${esp32c3.lib_deps}
|
|
|
|
[env:esp32s3dev_8MB]
|
|
;; ESP32-S3-DevKitC-1 development board, with 8MB FLASH, no PSRAM (flash_mode: qio)
|
|
board = esp32-s3-devkitc-1
|
|
platform = ${esp32s3.platform}
|
|
platform_packages = ${esp32s3.platform_packages}
|
|
upload_speed = 921600 ; or 460800
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags} ${esp32s3.build_flags} -D WLED_RELEASE_NAME=ESP32-S3_8MB
|
|
-D CONFIG_LITTLEFS_FOR_IDF_3_2 -D WLED_WATCHDOG_TIMEOUT=0
|
|
-D ARDUINO_USB_CDC_ON_BOOT=0 ;; -D ARDUINO_USB_MODE=1 ;; for boards with serial-to-USB chip
|
|
;-D ARDUINO_USB_CDC_ON_BOOT=1 ;; -D ARDUINO_USB_MODE=1 ;; for boards with USB-OTG connector only (USBCDC or "TinyUSB")
|
|
;-D WLED_DEBUG
|
|
lib_deps = ${esp32s3.lib_deps}
|
|
board_build.partitions = tools/WLED_ESP32_8MB.csv
|
|
board_build.f_flash = 80000000L
|
|
board_build.flash_mode = qio
|
|
; board_build.flash_mode = dio ;; try this if you have problems at startup
|
|
monitor_filters = esp32_exception_decoder
|
|
|
|
[env:esp32s3dev_8MB_PSRAM_opi]
|
|
;; ESP32-S3 development board, with 8MB FLASH and >= 8MB PSRAM (memory_type: qio_opi)
|
|
board = esp32-s3-devkitc-1 ;; generic dev board; the next line adds PSRAM support
|
|
board_build.arduino.memory_type = qio_opi ;; use with PSRAM: 8MB or 16MB
|
|
platform = ${esp32s3.platform}
|
|
platform_packages = ${esp32s3.platform_packages}
|
|
upload_speed = 921600
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags} ${esp32s3.build_flags}
|
|
-D CONFIG_LITTLEFS_FOR_IDF_3_2 -D WLED_WATCHDOG_TIMEOUT=0
|
|
;-D ARDUINO_USB_CDC_ON_BOOT=0 ;; -D ARDUINO_USB_MODE=1 ;; for boards with serial-to-USB chip
|
|
-D ARDUINO_USB_CDC_ON_BOOT=1 -D ARDUINO_USB_MODE=1 ;; for boards with USB-OTG connector only (USBCDC or "TinyUSB")
|
|
; -D WLED_RELEASE_NAME=ESP32-S3_PSRAM
|
|
-D WLED_USE_PSRAM -DBOARD_HAS_PSRAM ; tells WLED that PSRAM shall be used
|
|
lib_deps = ${esp32s3.lib_deps}
|
|
board_build.partitions = tools/WLED_ESP32_8MB.csv
|
|
board_build.f_flash = 80000000L
|
|
board_build.flash_mode = qio
|
|
monitor_filters = esp32_exception_decoder
|
|
|
|
[env:esp32s3dev_16MB_PSRAM_opi]
|
|
extends = env:esp32s3dev_8MB_PSRAM_opi
|
|
board_build.partitions = tools/WLED_ESP32_16MB.csv
|
|
board_upload.flash_size = 16MB
|
|
|
|
[env:esp32s3dev_8MB_PSRAM_qspi]
|
|
;; ESP32-TinyS3 development board, with 8MB FLASH and PSRAM (memory_type: qio_qspi)
|
|
extends = env:esp32s3dev_8MB_PSRAM_opi
|
|
;board = um_tinys3 ; -> needs workaround from https://github.com/Aircoookie/WLED/pull/2905#issuecomment-1328049860
|
|
board = esp32-s3-devkitc-1 ;; generic dev board; the next line adds PSRAM support
|
|
board_build.arduino.memory_type = qio_qspi ;; use with PSRAM: 2MB or 4MB
|
|
|
|
[env:esp8285_4CH_MagicHome]
|
|
board = esp8285
|
|
platform = ${common.platform_wled_default}
|
|
platform_packages = ${common.platform_packages}
|
|
board_build.ldscript = ${common.ldscript_1m128k}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags_esp8266} -D WLED_DISABLE_OTA
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
[env:esp8285_H801]
|
|
board = esp8285
|
|
platform = ${common.platform_wled_default}
|
|
platform_packages = ${common.platform_packages}
|
|
board_build.ldscript = ${common.ldscript_1m128k}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags_esp8266} -D WLED_DISABLE_OTA
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
[env:d1_mini_5CH_Shojo_PCB]
|
|
board = d1_mini
|
|
platform = ${common.platform_wled_default}
|
|
platform_packages = ${common.platform_packages}
|
|
board_build.ldscript = ${common.ldscript_4m1m}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags_esp8266} -D WLED_USE_SHOJO_PCB
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
# ------------------------------------------------------------------------------
|
|
# DEVELOPMENT BOARDS
|
|
# ------------------------------------------------------------------------------
|
|
|
|
[env:d1_mini_debug]
|
|
board = d1_mini
|
|
build_type = debug
|
|
platform = ${common.platform_wled_default}
|
|
platform_packages = ${common.platform_packages}
|
|
board_build.ldscript = ${common.ldscript_4m1m}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags_esp8266} ${common.debug_flags}
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
[env:d1_mini_ota]
|
|
board = d1_mini
|
|
upload_protocol = espota
|
|
# exchange for your WLED IP
|
|
upload_port = "10.10.1.27"
|
|
platform = ${common.platform_wled_default}
|
|
platform_packages = ${common.platform_packages}
|
|
board_build.ldscript = ${common.ldscript_4m1m}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags_esp8266}
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
[env:anavi_miracle_controller]
|
|
board = d1_mini
|
|
platform = ${common.platform_wled_default}
|
|
platform_packages = ${common.platform_packages}
|
|
board_build.ldscript = ${common.ldscript_4m1m}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags_esp8266} -D LEDPIN=12 -D IRPIN=-1 -D RLYPIN=2
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
[env:lolin_s2_mini]
|
|
platform = ${esp32s2.platform}
|
|
platform_packages = ${esp32s2.platform_packages}
|
|
board = lolin_s2_mini
|
|
board_build.partitions = tools/WLED_ESP32_4MB_1MB_FS.csv
|
|
build_unflags = ${common.build_unflags} #-DARDUINO_USB_CDC_ON_BOOT=1
|
|
build_flags = ${common.build_flags} ${esp32s2.build_flags} -D WLED_RELEASE_NAME=ESP32-S2
|
|
-DBOARD_HAS_PSRAM
|
|
-DARDUINO_USB_CDC_ON_BOOT=1 # try disabling and enabling unflag above in case of board-specific issues, will disable Serial
|
|
-DARDUINO_USB_MSC_ON_BOOT=0
|
|
-DARDUINO_USB_DFU_ON_BOOT=0
|
|
-DLOLIN_WIFI_FIX ; seems to work much better with this
|
|
-D WLED_USE_PSRAM
|
|
; -D WLED_USE_UNREAL_MATH ;; may cause wrong sunset/sunrise times, but saves 6792 bytes FLASH
|
|
-D WLED_WATCHDOG_TIMEOUT=0
|
|
-D CONFIG_ASYNC_TCP_USE_WDT=0
|
|
-D LEDPIN=16
|
|
-D BTNPIN=18
|
|
-D RLYPIN=9
|
|
-D IRPIN=7
|
|
-D HW_PIN_SCL=35
|
|
-D HW_PIN_SDA=33
|
|
-D HW_PIN_CLOCKSPI=7
|
|
-D HW_PIN_MOSISPI=11 ;WLEDMM renamed from HW_PIN_DATASPI
|
|
-D HW_PIN_MISOSPI=9
|
|
; -D STATUSLED=15
|
|
lib_deps = ${esp32s2.lib_deps}
|
|
|
|
# ------------------------------------------------------------------------------
|
|
# custom board configurations
|
|
# ------------------------------------------------------------------------------
|
|
|
|
[env:esp32c3dev_2MB]
|
|
;; for ESP32-C3 boards with 2MB flash (instead of 4MB).
|
|
;; this board need a specific partition file. OTA not possible.
|
|
extends = esp32c3
|
|
platform = ${esp32c3.platform}
|
|
platform_packages = ${esp32c3.platform_packages}
|
|
board = esp32-c3-devkitm-1
|
|
build_flags = ${common.build_flags} ${esp32c3.build_flags} #-D WLED_RELEASE_NAME=ESP32-C3
|
|
-D WLED_WATCHDOG_TIMEOUT=0
|
|
-D WLED_DISABLE_OTA
|
|
; -DARDUINO_USB_CDC_ON_BOOT=1 ;; for virtual CDC USB
|
|
-DARDUINO_USB_CDC_ON_BOOT=0 ;; for serial-to-USB chip
|
|
build_unflags = ${common.build_unflags}
|
|
upload_speed = 115200
|
|
lib_deps = ${esp32c3.lib_deps}
|
|
board_build.partitions = tools/WLED_ESP32_2MB_noOTA.csv
|
|
board_build.flash_mode = dio
|
|
board_upload.flash_size = 2MB
|
|
board_upload.maximum_size = 2097152
|
|
|
|
;WLEDMM: see below
|
|
; [env:wemos_shield_esp32]
|
|
; board = esp32dev
|
|
; platform = ${esp32.platform}
|
|
; platform_packages = ${esp32.platform_packages}
|
|
; upload_speed = 460800
|
|
; build_unflags = ${common.build_unflags}
|
|
; build_flags = ${common.build_flags_esp32}
|
|
; -D LEDPIN=16
|
|
; -D RLYPIN=19
|
|
; -D BTNPIN=17
|
|
; -D IRPIN=18
|
|
; -U WLED_USE_MY_CONFIG
|
|
; -D USERMOD_DALLASTEMPERATURE
|
|
; -D USERMOD_FOUR_LINE_DISPLAY
|
|
; -D TEMPERATURE_PIN=23
|
|
; -D USE_ALT_DISPlAY ; new versions of USERMOD_FOUR_LINE_DISPLAY and USERMOD_ROTARY_ENCODER_UI
|
|
; -D USERMOD_AUDIOREACTIVE
|
|
; lib_deps = ${esp32.lib_deps}
|
|
; OneWire@~2.3.5
|
|
; olikraus/U8g2 @ ^2.28.8
|
|
; https://github.com/blazoncek/arduinoFFT.git
|
|
; board_build.partitions = ${esp32.default_partitions}
|
|
|
|
[env:m5atom]
|
|
board = esp32dev
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags_esp32} -D LEDPIN=27 -D BTNPIN=39
|
|
lib_deps = ${esp32.lib_deps}
|
|
platform = ${esp32.platform}
|
|
platform_packages = ${esp32.platform_packages}
|
|
board_build.partitions = ${esp32.default_partitions}
|
|
|
|
[env:sp501e]
|
|
board = esp_wroom_02
|
|
platform = ${common.platform_wled_default}
|
|
board_build.ldscript = ${common.ldscript_2m512k}
|
|
build_flags = ${common.build_flags_esp8266} -D LEDPIN=3 -D BTNPIN=1
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
[env:sp511e]
|
|
board = esp_wroom_02
|
|
platform = ${common.platform_wled_default}
|
|
board_build.ldscript = ${common.ldscript_2m512k}
|
|
build_flags = ${common.build_flags_esp8266} -D LEDPIN=3 -D BTNPIN=2 -D IRPIN=5 -D WLED_MAX_BUTTONS=3
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
[env:Athom_RGBCW] ;7w and 5w(GU10) bulbs
|
|
board = esp8285
|
|
platform = ${common.platform_wled_default}
|
|
platform_packages = ${common.platform_packages}
|
|
board_build.ldscript = ${common.ldscript_2m512k}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP8266 -D BTNPIN=-1 -D RLYPIN=-1 -D DATA_PINS=4,12,14,13,5
|
|
-D DEFAULT_LED_TYPE=TYPE_ANALOG_5CH -D WLED_DISABLE_INFRARED -D WLED_MAX_CCT_BLEND=0
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
|
|
[env:Athom_15w_RGBCW] ;15w bulb
|
|
board = esp8285
|
|
platform = ${common.platform_wled_default}
|
|
platform_packages = ${common.platform_packages}
|
|
board_build.ldscript = ${common.ldscript_2m512k}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP8266 -D BTNPIN=-1 -D RLYPIN=-1 -D DATA_PINS=4,12,14,5,13
|
|
-D DEFAULT_LED_TYPE=TYPE_ANALOG_5CH -D WLED_DISABLE_INFRARED -D WLED_MAX_CCT_BLEND=0 -D WLED_USE_IC_CCT
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
|
|
[env:Athom_3Pin_Controller] ;small controller with only data
|
|
board = esp8285
|
|
platform = ${common.platform_wled_default}
|
|
platform_packages = ${common.platform_packages}
|
|
board_build.ldscript = ${common.ldscript_2m512k}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP8266 -D BTNPIN=0 -D RLYPIN=-1 -D LEDPIN=1 -D WLED_DISABLE_INFRARED
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
|
|
[env:Athom_4Pin_Controller] ; With clock and data interface
|
|
board = esp8285
|
|
platform = ${common.platform_wled_default}
|
|
platform_packages = ${common.platform_packages}
|
|
board_build.ldscript = ${common.ldscript_2m512k}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP8266 -D BTNPIN=0 -D RLYPIN=12 -D LEDPIN=1 -D WLED_DISABLE_INFRARED
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
|
|
[env:Athom_5Pin_Controller] ;Analog light strip controller
|
|
board = esp8285
|
|
platform = ${common.platform_wled_default}
|
|
platform_packages = ${common.platform_packages}
|
|
board_build.ldscript = ${common.ldscript_2m512k}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP8266 -D BTNPIN=0 -D RLYPIN=-1 DATA_PINS=4,12,14,13 -D WLED_DISABLE_INFRARED
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
|
|
[env:MY9291]
|
|
board = esp01_1m
|
|
platform = ${common.platform_wled_default}
|
|
platform_packages = ${common.platform_packages}
|
|
board_build.ldscript = ${common.ldscript_1m128k}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP01 -D WLED_DISABLE_OTA -D USERMOD_MY9291
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
# ------------------------------------------------------------------------------
|
|
# codm pixel controller board configurations
|
|
# codm-controller-0_6 can also be used for the TYWE3S controller
|
|
# ------------------------------------------------------------------------------
|
|
|
|
[env:codm-controller-0_6]
|
|
board = esp_wroom_02
|
|
platform = ${common.platform_wled_default}
|
|
platform_packages = ${common.platform_packages}
|
|
board_build.ldscript = ${common.ldscript_2m512k}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags_esp8266}
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
[env:codm-controller-0_6-rev2]
|
|
board = esp_wroom_02
|
|
platform = ${common.platform_wled_default}
|
|
platform_packages = ${common.platform_packages}
|
|
board_build.ldscript = ${common.ldscript_4m1m}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags_esp8266}
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
# ------------------------------------------------------------------------------
|
|
# EleksTube-IPS
|
|
# ------------------------------------------------------------------------------
|
|
[env:elekstube_ips]
|
|
board = esp32dev
|
|
platform = ${esp32.platform}
|
|
platform_packages = ${esp32.platform_packages}
|
|
upload_speed = 921600
|
|
build_flags = ${common.build_flags_esp32} -D WLED_DISABLE_BROWNOUT_DET -D WLED_DISABLE_INFRARED
|
|
-D USERMOD_RTC
|
|
-D USERMOD_ELEKSTUBE_IPS
|
|
-D LEDPIN=12
|
|
-D RLYPIN=27
|
|
-D BTNPIN=34
|
|
-D DEFAULT_LED_COUNT=6
|
|
# Display config
|
|
-D ST7789_DRIVER
|
|
-D TFT_WIDTH=135
|
|
-D TFT_HEIGHT=240
|
|
-D CGRAM_OFFSET
|
|
-D TFT_SDA_READ
|
|
-D TFT_MOSI=23
|
|
-D TFT_SCLK=18
|
|
-D TFT_DC=25
|
|
-D TFT_RST=26
|
|
-D SPI_FREQUENCY=40000000
|
|
-D USER_SETUP_LOADED
|
|
monitor_filters = esp32_exception_decoder
|
|
lib_deps =
|
|
${esp32.lib_deps}
|
|
TFT_eSPI @ ^2.3.70
|
|
board_build.partitions = ${esp32.default_partitions}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
# ------------------------------------------------------------------------------
|
|
# MoonModules environments
|
|
# see https://mm.kno.wled.ge/moonmodules/platformio-entries/
|
|
# ------------------------------------------------------------------------------
|
|
|
|
; shared build flags and lib deps for minimum and maximum environment
|
|
[common_mm]
|
|
|
|
build_disable_sync_interfaces =
|
|
-D WLED_DISABLE_LOXONE
|
|
-D WLED_DISABLE_ALEXA
|
|
-D WLED_DISABLE_HUESYNC
|
|
-D WLED_DISABLE_MQTT
|
|
-D WLED_DISABLE_INFRARED
|
|
-D WLED_DISABLE_ADALIGHT ;; WLEDMM this board does not have a serial-to-USB chip. Better to disable serial protocols, to avoid crashes (see upstream #3128)
|
|
-D WLED_DISABLE_ESPNOW ;; ESP-NOW requires wifi, may crash with ethernet only
|
|
|
|
build_flags_S =
|
|
-Wall -Wformat -Woverflow -Wuninitialized -Winit-self -Warray-bounds ; enables more warnings
|
|
-Wno-attributes -Wno-unused-variable -Wno-unused-function -Wno-deprecated-declarations ;disables some stupid warnings
|
|
;-D WLED_DISABLE_BROWNOUT_DET ; enable if you get "brownout detected" errors at startup
|
|
-D WLED_USE_MY_CONFIG
|
|
; -D WLED_DISABLE_2D ;; un-comment to build a firmware without 2D matrix support
|
|
; -D WLED_USE_CIE_BRIGHTNESS_TABLE ;; experimental: use different color / brightness lookup table
|
|
-D USERMOD_AUDIOREACTIVE
|
|
-D UM_AUDIOREACTIVE_USE_NEW_FFT ; use latest (upstream) FFTLib, instead of older library modified by blazoncek. Slightly faster, more accurate, needs 2KB RAM extra
|
|
; -D USERMOD_ARTIFX ;; WLEDMM usermod - temporarily moved into "_M", due to problems in "_S" when compiling with -O2
|
|
-D WLEDMM_FASTPATH ;; WLEDMM experimental option. Reduces audio lag (latency), and allows for faster LED framerates. May break compatibility with previous versions.
|
|
; -D WLED_DEBUG_HEAP ;; WLEDMM enable heap debugging
|
|
${common_mm.build_disable_sync_interfaces}
|
|
|
|
lib_deps_S =
|
|
;; https://github.com/kosme/arduinoFFT#develop @ 1.9.2+sha.419d7b0 ;; used for USERMOD_AUDIOREACTIVE - using "known working" hash
|
|
https://github.com/softhack007/arduinoFFT.git#develop @ 1.9.2 ;; used for USERMOD_AUDIOREACTIVE - optimized version, 10% faster on -S2/-C3
|
|
|
|
|
|
animartrix_build_flags = -D USERMOD_ANIMARTRIX ;; WLEDMM usermod: CC BY-NC 3.0 licensed effects by Stefan Petrick
|
|
animartrix_lib_deps = https://github.com/netmindz/animartrix.git#18bf17389e57c69f11bc8d04ebe1d215422c7fb7
|
|
|
|
build_flags_M =
|
|
-D USERMOD_ARTIFX ; WLEDMM usermod - temporarily moved into "_M", due to problems in "_S" when compiling with -O2
|
|
-D WLED_MAX_USERMODS=25 ; default only 4-6, also for _XL configs takes 25 pointers in memory
|
|
;; -D ARDUINO_USB_CDC_ON_BOOT=0 ; needed for arduino-esp32 >=2.0.4 ewowi to softhack: move to build_flags_S? - We need a different solution
|
|
-D WLED_USE_MY_CONFIG ; include custom my_config.h ewowi to softhack: redundant as also in build_flags_S?
|
|
-D USERMOD_DALLASTEMPERATURE
|
|
-D USE_ALT_DISPLAY ; new versions of USERMOD_FOUR_LINE_DISPLAY and USERMOD_ROTARY_ENCODER_UI
|
|
-D USERMOD_FOUR_LINE_DISPLAY
|
|
-D USERMOD_ROTARY_ENCODER_UI
|
|
-D USERMOD_AUTO_SAVE
|
|
${common_mm.animartrix_build_flags}
|
|
;WLEDMM: only setting WLED_DEBUG_HOST is enough, ip and port can be defined in sync settings as well
|
|
-D WLED_DEBUG_HOST='"192.168.x.x"' ;; to send debug messages over network to host 192.168.x.y - FQDN is also possible
|
|
-D WLED_DEBUG_PORT=1768 ;; port for network debugging. default = 7868
|
|
|
|
lib_deps_M =
|
|
;https://github.com/blazoncek/OneWire.git ; includes bugfixes for inconsistent readings
|
|
OneWire@~2.3.5 ; used for USERMOD_FOUR_LINE_DISPLAY and USERMOD_DALLASTEMPERATURE
|
|
olikraus/U8g2 @ ^2.28.8 ; used for USERMOD_FOUR_LINE_DISPLAY
|
|
${common_mm.animartrix_lib_deps}
|
|
|
|
lib_deps_V4_M =
|
|
;https://github.com/blazoncek/OneWire.git ; includes bugfixes for inconsistent readings
|
|
paulstoffregen/OneWire@ ^2.3.7 ; used for USERMOD_DALLASTEMPERATURE -> need newer release with bugfixes for -S3; still requires TEMPERATURE_PIN < 46
|
|
olikraus/U8g2@ ^2.34.5 ; used for USERMOD_FOUR_LINE_DISPLAY -> need newer version with bugfixes for arduino-esp32 v2.0.4 (Wire initialization)
|
|
${common_mm.animartrix_lib_deps}
|
|
|
|
build_flags_XL =
|
|
-D USERMOD_WEATHER ; WLEDMM usermod
|
|
-D USERMOD_MPU6050_IMU ; gyro/accelero for USERMOD_GAMES (ONLY WORKS IF USERMOD_FOUR_LINE_DISPLAY NOT INCLUDED - I2C SHARING BUG)
|
|
-D USERMOD_GAMES ; WLEDMM usermod
|
|
-D USERMOD_BATTERY ;; enable Battery usermod
|
|
-D USERMOD_BATTERY_USE_LIPO ;; use new "discharging curve" for LiPo cells
|
|
-D USERMOD_BH1750
|
|
-D USERMOD_ANIMATED_STAIRCASE
|
|
-D USERMOD_RTC ;; experimental
|
|
; -D USERMOD_SENSORSTOMQTT ;; experimental ewowi causes error: fatal error: Adafruit_Sensor.h: No such file or directory
|
|
-D USERMOD_ANALOG_CLOCK
|
|
-D USERMOD_MULTI_RELAY
|
|
-D USERMOD_PIRSWITCH
|
|
-D USERMOD_PWM_FAN
|
|
; -D USERMOD_PING_PONG_CLOCK ;; Removed as dots is confusing
|
|
; -D USERMOD_BUZZER ;; Removed as it grabs gpio32 (pin needed by audioreactive)
|
|
-D USERMOD_SN_PHOTORESISTOR
|
|
-D USERMOD_BME280
|
|
-D USERMOD_DHT
|
|
; -D USERMOD_SHT ;; experimental
|
|
-D USERMOD_VL53L0X_GESTURES
|
|
-D WLED_ENABLE_PIXART
|
|
${common_mm.animartrix_build_flags}
|
|
|
|
lib_deps_XL =
|
|
ElectronicCats/MPU6050 @ 0.6.0 ; used for USERMOD_MPU6050_IMU
|
|
claws/BH1750 @^1.2.0 ; used for USERMOD_BH1750
|
|
; adafruit/Adafruit BMP280 Library @ 2.1.0 ;; experimental for usermod USERMOD_SENSORSTOMQTT
|
|
; adafruit/Adafruit CCS811 Library @ 1.0.4 ;; experimental for usermod USERMOD_SENSORSTOMQTT
|
|
; adafruit/Adafruit Si7021 Library @ 1.4.0 ;; experimental for usermod USERMOD_SENSORSTOMQTT
|
|
BME280@~3.0.0 ; for usermod USERMOD_BME280
|
|
https://github.com/alwynallan/DHT_nonblocking ; for usermod USERMOD_DHT
|
|
; robtillaart/SHT85 @ ~0.4.0 ;; for usermod USERMOD_SHT
|
|
pololu/VL53L0X @ ^1.3.0 ; for usermod USERMOD_VL53L0X_GESTURES
|
|
|
|
; end of common
|
|
|
|
; base entries (without WLED_RELEASE_NAME)
|
|
|
|
; common defaults for all MM environments
|
|
[esp32_4MB_S_base]
|
|
board = esp32dev
|
|
platform = ${esp32.platform}
|
|
upload_speed = 460800 ; or 921600
|
|
platform_packages = ${esp32.platform_packages}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags_esp32} ${common_mm.build_flags_S}
|
|
lib_deps = ${esp32.lib_deps} ${common_mm.lib_deps_S}
|
|
board_build.partitions = ${esp32.default_partitions}
|
|
board_build.f_flash = 80000000L ; use full 80MHz speed for flash (default = 40Mhz)
|
|
board_build.flash_mode = dio ; (dio = dual i/o; more compatible than qio = quad i/o)
|
|
monitor_filters = esp32_exception_decoder
|
|
|
|
;common default for all max environments
|
|
[esp32_4MB_M_base]
|
|
extends = esp32_4MB_S_base
|
|
build_flags = ${esp32_4MB_S_base.build_flags} ${common_mm.build_flags_M}
|
|
build_unflags = ${esp32_4MB_S_base.build_unflags} ${common_mm.build_disable_sync_interfaces}
|
|
lib_deps = ${esp32_4MB_S_base.lib_deps} ${common_mm.lib_deps_M}
|
|
; board_build.partitions = tools/WLED_ESP32-wrover_4MB.csv
|
|
|
|
[esp32_4MB_XL_base]
|
|
extends = esp32_4MB_M_base
|
|
build_flags = ${esp32_4MB_M_base.build_flags} ${common_mm.build_flags_XL}
|
|
build_unflags = ${esp32_4MB_M_base.build_unflags} ${common_mm.build_disable_sync_interfaces}
|
|
lib_deps = ${esp32_4MB_M_base.lib_deps} ${common_mm.lib_deps_XL}
|
|
; board_build.partitions = tools/WLED_ESP32-wrover_4MB.csv
|
|
|
|
;common default for all V4 min environments, including -S3, -S2, -C3
|
|
[esp32_4MB_V4_S_base]
|
|
board = esp32dev
|
|
upload_speed = 460800 ; or 921600
|
|
platform = ${esp32.platformV4}
|
|
platform_packages = ${esp32.platformV4_packages}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags} ${common_mm.build_flags_S} ;; do not include ${esp32.build_flagsV4} here !!!!
|
|
-Wno-misleading-indentation -Wno-format-truncation
|
|
-Wshadow=compatible-local ;; emit warning in case a local variable "shadows" another local one
|
|
;-Wstack-usage=2732 ;; warn if a function needs more that 30% of availeable stack ("stack usage might be unbounded", "stack usage is 2824 bytes")
|
|
;-Wsuggest-attribute=const -Wsuggest-attribute=pure ;; ask compiler for hints on attributes
|
|
-D WLED_ENABLE_DMX_INPUT
|
|
lib_deps = ${common_mm.lib_deps_S} ;; do not include ${esp32.lib_depsV4} here !!!!
|
|
https://github.com/someweisguy/esp_dmx.git#v3.0.2-beta ;; for DMX_INPUT
|
|
esp32_build_flags = ${esp32.build_flagsV4} ${esp32_4MB_V4_S_base.build_flags} ;; this is for esp32 only, including specific "V4" flags
|
|
esp32_lib_deps = ${esp32.lib_depsV4} ${esp32_4MB_V4_S_base.lib_deps} ;; this is for esp32 only, including specific "V4" flags
|
|
board_build.partitions = ${esp32.default_partitions}
|
|
board_build.f_flash = 80000000L ; use full 80MHz speed for flash (default = 40Mhz)
|
|
board_build.flash_mode = dio ; (dio = dual i/o; more compatible than qio = quad i/o)
|
|
;lib_ignore = IRremoteESP8266 ; use with WLED_DISABLE_INFRARED for faster compilation
|
|
; monitor_filters = esp32_exception_decoder ; used to show crash details
|
|
|
|
[esp32_4MB_V4_M_base]
|
|
extends = esp32_4MB_V4_S_base
|
|
build_flags = ${esp32_4MB_V4_S_base.build_flags} ${common_mm.build_flags_M} ;; generic, for all variants
|
|
lib_deps = ${esp32_4MB_V4_S_base.lib_deps} ${common_mm.lib_deps_V4_M}
|
|
esp32_build_flags = ${esp32_4MB_V4_S_base.esp32_build_flags} ${common_mm.build_flags_M} ;; for esp32 only, including specific "V4" flags
|
|
esp32_lib_deps = ${esp32_4MB_V4_S_base.esp32_lib_deps} ${common_mm.lib_deps_V4_M}
|
|
board_build.partitions = ${esp32_4MB_V4_S_base.board_build.partitions}
|
|
;board_build.flash_mode = qio ; (dio = dual i/o; more compatible than qio = quad i/o)
|
|
|
|
[Shield_ICS4343x]
|
|
build_flags =
|
|
-D SR_DMTYPE=1 -D I2S_SDPIN=32 -D I2S_WSPIN=15 -D I2S_CKPIN=14 ; for regular I2S microphone
|
|
-D SR_SQUELCH=10 -D SR_GAIN=30 -D SR_FREQ_PROF=5 ; ICS-43434 specific
|
|
|
|
[Shield_SPM1423]
|
|
build_flags =
|
|
-D SR_DMTYPE=5 -D I2S_SDPIN=32 -D I2S_WSPIN=15 -D I2S_CKPIN=-1 ; for I2S PDM microphone
|
|
-D SR_SQUELCH=3 -D SR_GAIN=75 -D SR_FREQ_PROF=7 ; SPM1423 specific
|
|
|
|
[Athom_PDMmic]
|
|
build_flags =
|
|
-D SR_DMTYPE=51 -D I2S_SDPIN=32 -D I2S_WSPIN=15 -D I2S_CKPIN=-1 ; for I2S PDM microphone Legacy mode!
|
|
-D SR_SQUELCH=10 -D SR_GAIN=40 -D SR_FREQ_PROF=7 ; SPM1423 specific
|
|
|
|
[Shield_LineIn]
|
|
build_unflags =
|
|
-D BTNPIN=17 ;; remove - its in conflict with on-shield rotary
|
|
-D ENCODER_SW_PIN=5 ;; remove - its in conflict with on-shield rotary
|
|
-D BTNPIN=0 ;; remove - its in conflict with MCLK pin
|
|
build_flags =
|
|
-D BTNPIN=-1
|
|
-D SR_DMTYPE=4 -D MCLK_PIN=0 -D I2S_SDPIN=26 -D I2S_WSPIN=25 -D I2S_CKPIN=27 ; for audio Line-In shield, final version
|
|
-D SR_LINE_DETECT=34 ; line-in plug insert detection sensor (future support)
|
|
-D SR_SQUELCH=8 -D SR_GAIN=40 -D SR_FREQ_PROF=1 ; CS5343 Line-In specific
|
|
-D ENCODER_DT_PIN=35 -D ENCODER_CLK_PIN=39 -D ENCODER_SW_PIN=17 ; on-shield rotary encoder
|
|
|
|
[Debug_Flags]
|
|
build_flags =
|
|
-DDEBUG=1 ;; enable some debug assertions in the platform core
|
|
; -D WLED_DEBUG_HEAP ;; WLEDMM enable heap debugging
|
|
-D WLED_DEBUG ; lots of generic debug messages
|
|
-D SR_DEBUG ; some extra debug messages from audioreactive
|
|
; -D MIC_LOGGER ; for sound input monitoring & debugging (use arduino serial plotter)
|
|
; NetDebug moved to build_flags_M
|
|
|
|
[Speed_Flags]
|
|
build_flags =
|
|
-O2 ;; optimize for performance instead of size
|
|
;-ffast-math ;; gives a few (2-5) percent speedup on ESP32-S3, but causes slight slowdown on classic ESP32
|
|
-mtarget-align -free -fipa-pta ;; these are very useful, too
|
|
-fno-jump-tables -fno-tree-switch-conversion ;; needed
|
|
-freorder-blocks -Wwrite-strings -fstrict-volatile-bitfields ;; needed
|
|
build_unflags =
|
|
-Os ;; to disable standard optimization for size
|
|
|
|
; end of base entries
|
|
|
|
|
|
; bin entries (with WLED_RELEASE_NAME)
|
|
;; ESP32, 4MB, optimized for speed, basic features and audioreactive only
|
|
[env:esp32_4MB_S]
|
|
extends = esp32_4MB_S_base
|
|
build_unflags = ${esp32_4MB_S_base.build_unflags}
|
|
${Speed_Flags.build_unflags} ;; to override -Os
|
|
build_flags = ${esp32_4MB_S_base.build_flags}
|
|
${Speed_Flags.build_flags} ;; -O2 -> optimize for speed instead of size
|
|
-D WLED_RELEASE_NAME=esp32_4MB_S
|
|
-D WLEDMM_FASTPATH ; WLEDMM experimental option. Reduces audio lag (latency), and allows for faster LED framerates. May break compatibility with previous versions.
|
|
;; for speed builds, we need to disable some features to stay within 4MB flash
|
|
;-D WLED_DISABLE_ALEXA
|
|
-D WLED_DISABLE_HUESYNC
|
|
-D WLED_DISABLE_LOXONE
|
|
;-D WLED_DISABLE_MQTT
|
|
;-D WLED_DISABLE_INFRARED
|
|
;WLEDMM: disable the next two lines if you don't need "net Debug". It will free ~2% of flash
|
|
-D WLED_DEBUG_HOST='"192.168.x.x"' ;; to send debug messages over network to host 192.168.x.y - FQDN is also possible
|
|
-D WLED_DEBUG_PORT=1768 ;; port for network debugging. default = 7868
|
|
;; normal build
|
|
; RAM: [=== ] 25.0% (used 81988 bytes from 327680 bytes)
|
|
; Flash: [========= ] 87.4% (used 1374677 bytes from 1572864 bytes) WLEDMM: Earlier 85.7
|
|
;; optimized-for-speed build
|
|
; RAM: [=== ] 25.8% (used 84628 bytes from 327680 bytes)
|
|
; Flash: [==========] 99.4% (used 1562869 bytes from 1572864 bytes)
|
|
|
|
[env:esp32_4MB_M]
|
|
extends = esp32_4MB_M_base
|
|
build_flags = ${esp32_4MB_M_base.build_flags}
|
|
-D WLED_RELEASE_NAME=esp32_4MB_M
|
|
; RAM: [=== ] 25.2% (used 82628 bytes from 327680 bytes)
|
|
; Flash: [========= ] 94.3% (used 1483793 bytes from 1572864 bytes) WLEDMM: earlier 91.1
|
|
|
|
[env:esp32_4MB_M_eth]
|
|
extends = esp32_4MB_M_base
|
|
build_flags = ${esp32_4MB_M_base.build_flags}
|
|
-D WLED_RELEASE_NAME=esp32_4MB_M_eth
|
|
-D WLED_USE_ETHERNET
|
|
-D RLYPIN=-1 -D BTNPIN=-1 ;; Prevent clash
|
|
-D WLED_DISABLE_ESPNOW ;; ESP-NOW requires wifi, may crash with ethernet only
|
|
|
|
|
|
[env:esp32_4MB_XL]
|
|
extends = esp32_4MB_XL_base
|
|
build_flags = ${esp32_4MB_XL_base.build_flags}
|
|
-D WLED_RELEASE_NAME=esp32_4MB_XL
|
|
;-D WLED_DISABLE_ALEXA
|
|
;-D WLED_DISABLE_HUESYNC ;; Over the limits ?
|
|
-D WLED_DISABLE_LOXONE ;; Over the limits
|
|
;-D WLED_DISABLE_MQTT
|
|
;-D WLED_DISABLE_INFRARED
|
|
-D WLEDMM_SAVE_FLASH ;; a humble attempt to save a few extra bytes
|
|
build_unflags = ${esp32_4MB_XL_base.build_unflags}
|
|
-D USERMOD_ANIMARTRIX ;; Tips our memory usage over the limit
|
|
-D USERMOD_BUZZER ;; Over the limits, and steals GPIO 32
|
|
-D USERMOD_SN_PHOTORESISTOR ;; Over the limits
|
|
-D WLEDMM_FASTPATH ;; Over the limits
|
|
; RAM: [== ] 24.4% (used 80060 bytes from 327680 bytes)
|
|
; Flash: [==========] 95.3% (used 1499037 bytes from 1572864 bytes)
|
|
; !!! HELP !!!!! :
|
|
; RAM: [=== ] 26.2% (used 85756 bytes from 327680 bytes)
|
|
; Flash: [==========] 100.0% (used 1572553 bytes from 1572864 bytes)
|
|
|
|
;; standard framework build for 16MB flash, optimized for speed
|
|
[env:esp32_16MB_S]
|
|
extends = esp32_4MB_S_base
|
|
board = esp32_16MB
|
|
board_build.partitions = tools/WLED_ESP32_16MB.csv ;; WLED standard for 16MB flash: 2MB firmware, 12 MB filesystem
|
|
;board_build.partitions = tools/WLED_ESP32_16MB_9MB_FS.csv ;; WLED extended for 16MB flash: 3.2MB firmware, 9 MB filesystem
|
|
build_unflags = ${esp32_4MB_S_base.build_unflags}
|
|
${Speed_Flags.build_unflags} ;; to override -Os
|
|
build_flags = ${esp32_4MB_S_base.build_flags}
|
|
-D WLED_RELEASE_NAME=esp32_16MB_S
|
|
${Speed_Flags.build_flags} ;; optimize for speed instead of size
|
|
-D WLEDMM_FASTPATH ;; WLEDMM experimental option. Reduces audio lag (latency), and allows for faster LED framerates. May break compatibility with previous versions.
|
|
${common_mm.animartrix_build_flags}
|
|
lib_deps = ${esp32_4MB_S_base.lib_deps}
|
|
${common_mm.animartrix_lib_deps}
|
|
; lib_ignore = IRremoteESP8266 ; use with WLED_DISABLE_INFRARED for faster compilation
|
|
;;
|
|
;; normal build
|
|
; RAM: [=== ] 25.8% (used 84588 bytes from 327680 bytes)
|
|
; Flash: [======= ] 68.3% (used 1431377 bytes from 2097152 bytes)
|
|
;; optimized-for-speed build
|
|
; RAM: [=== ] 25.8% (used 84652 bytes from 327680 bytes)
|
|
; Flash: [======== ] 78.0% (used 1634829 bytes from 2097152 bytes)
|
|
|
|
[env:esp32_16MB_M]
|
|
extends = esp32_4MB_M_base
|
|
build_flags = ${esp32_4MB_M_base.build_flags}
|
|
-D WLED_RELEASE_NAME=esp32_16MB_M
|
|
board = esp32_16MB
|
|
board_build.partitions = tools/WLED_ESP32_16MB.csv ;; WLED standard for 16MB flash: 2MB firmware, 12 MB filesystem
|
|
;board_build.partitions = tools/WLED_ESP32_16MB_9MB_FS.csv ;; WLED extended for 16MB flash: 3.2MB firmware, 9 MB filesystem
|
|
; RAM: [== ] 24.4% (used 79916 bytes from 327680 bytes)
|
|
; Flash: [======= ] 67.0% (used 1405701 bytes from 2097152 bytes)
|
|
;lib_ignore = IRremoteESP8266 ; use with WLED_DISABLE_INFRARED for faster compilation
|
|
|
|
[env:esp32_4MB_M_debug]
|
|
extends = esp32_4MB_M_base
|
|
build_unflags = ${common.build_unflags}
|
|
-D CORE_DEBUG_LEVEL=0
|
|
-D USERMOD_ANIMARTRIX ;; Tips our memory usage over the limit
|
|
|
|
build_flags = ${esp32_4MB_M_base.build_flags}
|
|
${Debug_Flags.build_flags}
|
|
-D CORE_DEBUG_LEVEL=2 ;; 2=warning
|
|
-D WLED_RELEASE_NAME=esp32_4MB_M_debug
|
|
monitor_filters = esp32_exception_decoder
|
|
; RAM: [== ] 24.5% (used 80292 bytes from 327680 bytes)
|
|
; Flash: [========= ] 94.5% (used 1487113 bytes from 1572864 bytes)
|
|
|
|
[env:esp32_16MB_M_debug]
|
|
extends = esp32_4MB_M_base
|
|
build_unflags = ${common.build_unflags}
|
|
-D CORE_DEBUG_LEVEL=0
|
|
build_flags = ${esp32_4MB_M_base.build_flags}
|
|
${Debug_Flags.build_flags}
|
|
; -D WLED_DEBUG_HEAP ;; WLEDMM enable heap debugging (needs newer framework versions)
|
|
-D CORE_DEBUG_LEVEL=2 ;; 2=warning
|
|
-D WLED_RELEASE_NAME=esp32_16MB_M_debug
|
|
monitor_filters = esp32_exception_decoder
|
|
board = esp32_16MB
|
|
board_build.partitions = tools/WLED_ESP32_16MB.csv ;; WLED standard for 16MB flash: 2MB firmware, 12 MB filesystem
|
|
;board_build.partitions = tools/WLED_ESP32_16MB_9MB_FS.csv ;; WLED extended for 16MB flash: 3.2MB firmware, 9 MB filesystem
|
|
; RAM: [== ] 24.5% (used 80292 bytes from 327680 bytes)
|
|
; Flash: [======= ] 70.9% (used 1487129 bytes from 2097152 bytes)
|
|
|
|
[env:esp32_16MB_XL]
|
|
extends = esp32_4MB_XL_base
|
|
build_flags = ${esp32_4MB_XL_base.build_flags}
|
|
-D WLED_RELEASE_NAME=esp32_16MB_XL
|
|
board = esp32_16MB
|
|
board_build.partitions = tools/WLED_ESP32_16MB.csv ;; WLED standard for 16MB flash: 2MB firmware, 12 MB filesystem
|
|
;board_build.partitions = tools/WLED_ESP32_16MB_9MB_FS.csv ;; WLED extended for 16MB flash: 3.2MB firmware, 9 MB filesystem
|
|
; RAM: [== ] 24.4% (used 79916 bytes from 327680 bytes)
|
|
; Flash: [======= ] 67.0% (used 1405701 bytes from 2097152 bytes)
|
|
;lib_ignore = IRremoteESP8266 ; use with WLED_DISABLE_INFRARED for faster compilation
|
|
|
|
[env:esp32_16MB_M_eth]
|
|
extends = esp32_4MB_M_base
|
|
board_build.partitions = tools/WLED_ESP32_16MB.csv ;; WLED standard for 16MB flash: 2MB firmware, 12 MB filesystem
|
|
;board_build.partitions = tools/WLED_ESP32_16MB_9MB_FS.csv ;; WLED extended for 16MB flash: 3.2MB firmware, 9 MB filesystem
|
|
board = esp32_16MB-poe ;; needed for ethernet boards (selects "esp32-poe" as variant)
|
|
build_flags = ${esp32_4MB_M_base.build_flags}
|
|
-D WLED_RELEASE_NAME=esp32_16MB_M_eth ; This will be included in the firmware.bin filename
|
|
-D WLED_USE_ETHERNET
|
|
-D WLED_DISABLE_ESPNOW ;; ESP-NOW requires wifi, may crash with ethernet only
|
|
; RAM: [== ] 24.5% (used 80348 bytes from 327680 bytes)
|
|
; Flash: [======= ] 69.4% (used 1455233 bytes from 2097152 bytes)
|
|
|
|
|
|
[env:esp8266_2MB_S]
|
|
extends = env:esp8266_2m
|
|
upload_speed = 460800 ;115200
|
|
board_build.f_cpu = 160000000L ;; we want 160Mhz (default = 80Mhz)
|
|
build_flags = ${common.build_flags_esp8266}
|
|
-D WLED_RELEASE_NAME=esp8266_2MB_S
|
|
-D WLED_DISABLE_ALEXA
|
|
-D WLED_DISABLE_HUESYNC
|
|
-D WLED_DISABLE_ESPNOW ;; might help in case of WiFi connectivity problems
|
|
-D WLED_DISABLE_LOXONE ; FLASH 1272 bytes
|
|
;; -D WLED_DISABLE_MQTT ; RAM 216 bytes; FLASH 16496 bytes
|
|
;; -D WLED_DISABLE_INFRARED ;RAM 136 bytes; FLASH 24492 bytes
|
|
; -D WLED_DISABLE_2D
|
|
; -UWLED_USE_MY_CONFIG
|
|
-D WLED_DEBUG_HOST='"192.168.x.x"' ;; to send debug messages over network to host 192.168.x.y - FQDN is also possible
|
|
-D WLED_DEBUG_PORT=1768 ;; port for network debugging. default = 7868
|
|
; -D WLED_DEBUG
|
|
; monitor_filters = esp8266_exception_decoder
|
|
;; lib_ignore = IRremoteESP8266 ; use with WLED_DISABLE_INFRARED for faster compilation
|
|
; RAM: [====== ] 60.8% (used 49836 bytes from 81920 bytes)
|
|
; Flash: [======== ] 83.3% (used 869783 bytes from 1044464 bytes)
|
|
|
|
[env:esp8266_4MB_S]
|
|
extends = env:d1_mini
|
|
upload_speed = 460800 ;115200
|
|
board_build.f_cpu = 160000000L ;; we want 160Mhz (default = 80Mhz)
|
|
build_flags = ${common.build_flags_esp8266}
|
|
-D WLED_RELEASE_NAME=esp8266_4MB_S
|
|
-D WLED_DISABLE_ALEXA
|
|
-D WLED_DISABLE_HUESYNC
|
|
-D WLED_DISABLE_ESPNOW ;; might help in case of WiFi connectivity problems
|
|
-D WLED_DISABLE_LOXONE ; FLASH 1272 bytes
|
|
;; -D WLED_DISABLE_MQTT ; RAM 216 bytes; FLASH 16496 bytes
|
|
;; -D WLED_DISABLE_INFRARED ;RAM 136 bytes; FLASH 24492 bytes
|
|
; -D WLED_DISABLE_2D
|
|
; -UWLED_USE_MY_CONFIG
|
|
-D WLED_DEBUG_HOST='"192.168.x.x"' ;; to send debug messages over network to host 192.168.x.y - FQDN is also possible
|
|
-D WLED_DEBUG_PORT=1768 ;; port for network debugging. default = 7868
|
|
; -D WLED_DEBUG
|
|
; monitor_filters = esp8266_exception_decoder
|
|
;; lib_ignore = IRremoteESP8266 ; use with WLED_DISABLE_INFRARED for faster compilation
|
|
; RAM: [====== ] 60.8% (used 49824 bytes from 81920 bytes)
|
|
; Flash: [======== ] 83.3% (used 869779 bytes from 1044464 bytes)
|
|
[env:esp8266_4MB_M]
|
|
extends = env:d1_mini
|
|
upload_speed = 460800 ;115200
|
|
board_build.f_cpu = 160000000L ;; we want 160Mhz (default = 80Mhz)
|
|
build_flags = ${common.build_flags_esp8266}
|
|
-D WLED_RELEASE_NAME=esp8266_4MB_M
|
|
-D WLED_DISABLE_ALEXA
|
|
-D WLED_DISABLE_HUESYNC
|
|
-D WLED_DISABLE_LOXONE
|
|
; -D USERMOD_AUDIOREACTIVE
|
|
; -UWLED_USE_MY_CONFIG
|
|
; -D USERMOD_PIRSWITCH
|
|
; -D USERMOD_DALLASTEMPERATURE ;; disabled because it hangs during usermod setup on -S3 (autodetect broken?)
|
|
; -D USERMOD_MULTI_RELAY
|
|
-D USE_ALT_DISPLAY ; new versions of USERMOD_FOUR_LINE_DISPLAY and USERMOD_ROTARY_ENCODER_UI
|
|
-D WLED_MAX_USERMODS=5 ; default only 4 on ESP8266
|
|
-D USERMOD_FOUR_LINE_DISPLAY
|
|
-D USERMOD_MPU6050_IMU ; gyro/accelero for USERMOD_GAMES (ONLY WORKS IF USERMOD_FOUR_LINE_DISPLAY NOT INCLUDED - I2C SHARING BUG)
|
|
-D USERMOD_GAMES ; WLEDMM usermod
|
|
; -D USERMOD_ARTIFX ; this is compiling but not working due to low memory on 8266
|
|
-D USERMOD_BATTERY ;; enable Battery usermod
|
|
-D USERMOD_BATTERY_USE_LIPO ;; use new "discharging curve" for LiPo cells
|
|
-D WLED_DEBUG_HOST='"192.168.x.x"' ;; to send debug messages over network to host 192.168.x.y - FQDN is also possible
|
|
-D WLED_DEBUG_PORT=1768 ;; port for network debugging. default = 7868
|
|
; -D WLED_DEBUG
|
|
monitor_filters = esp8266_exception_decoder
|
|
lib_deps = ${esp8266.lib_deps}
|
|
OneWire@~2.3.5 ; used for USERMOD_FOUR_LINE_DISPLAY and USERMOD_DALLASTEMPERATURE
|
|
olikraus/U8g2 @ ^2.28.8 ; used for USERMOD_FOUR_LINE_DISPLAY
|
|
ElectronicCats/MPU6050 @ 0.6.0 ; used for USERMOD_MPU6050_IMU
|
|
; RAM: [====== ] 63.0% (used 51632 bytes from 81920 bytes)
|
|
; Flash: [========= ] 88.5% (used 924179 bytes from 1044464 bytes)
|
|
|
|
; Blaz env (for reference purposes)
|
|
[env:d1_mini_temp]
|
|
extends = env:d1_mini
|
|
board_build.filesystem = littlefs
|
|
build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP8266
|
|
-D WLED_DISABLE_ALEXA
|
|
-D WLED_DISABLE_HUESYNC
|
|
-D WLED_DISABLE_LOXONE
|
|
-D WLED_DISABLE_AUDIO ;WLEDMM not used anywhere
|
|
-D WLED_ENABLE_SIMPLE_UI
|
|
-D USERMOD_FOUR_LINE_DISPLAY
|
|
-D USE_ALT_DISPlAY
|
|
-D USERMOD_DALLASTEMPERATURE
|
|
-D TEMPERATURE_PIN=13 # (D7)
|
|
-D LEDPIN=2 # (D4)
|
|
-D RLYPIN=12 # (D6)
|
|
-D BTNPIN=0 # (D3)
|
|
-D IRPIN=14 # (D5)
|
|
-D USERMOD_MULTI_RELAY
|
|
-D MULTI_RELAY_MAX_RELAYS=2
|
|
-D USERMOD_PIRSWITCH
|
|
-D PIR_SENSOR_PIN=16
|
|
-D PIR_SENSOR_OFF_SEC=60
|
|
-UWLED_USE_MY_CONFIG
|
|
lib_deps = ${esp8266.lib_deps}
|
|
paulstoffregen/OneWire@~2.3.7 ;WLEDMM Softhack, we need this as well (instead of 2.3.5)?
|
|
olikraus/U8g2 # @~2.33.15
|
|
Wire ; WLEDMM ewowi, needed?
|
|
|
|
[env:esp8266pro_16MB_S]
|
|
extends = env:d1_mini
|
|
board = d1_mini_pro ;; "D1 mini pro": ESP8266EX, 160MHz, 80KB RAM, 16MB Flash
|
|
board_build.f_cpu = 160000000L ;; we want 160Mhz (default = 80Mhz)
|
|
;board_build.f_flash = 80000000L ;; for 80Mhz flash speed, in case your chip can handle it (default = 40Mhz)
|
|
board_build.flash_mode = qio ;; quad IO - fastest speed, in case your chip can handle it.
|
|
;;board_build.flash_mode = dout ;; use if your esp8266 becomes unstable with "qio"
|
|
board_build.ldscript = ${common.ldscript_16m14m} ;; 16MB flash, use 14MB for LittleFS
|
|
|
|
upload_speed = 460800 ;115200
|
|
build_flags = ${common.build_flags_esp8266}
|
|
-D WLED_RELEASE_NAME=esp8266pro_16MB_S
|
|
-D WLED_WATCHDOG_TIMEOUT=0
|
|
-D WLED_DISABLE_ALEXA
|
|
-D WLED_DISABLE_HUESYNC
|
|
; -D WLED_DEBUG ${common.debug_flags} ;; un-comment for debug messages
|
|
-D WLED_DEBUG_HOST='"192.168.x.x"' ;; to send debug messages over network to host 192.168.x.y - FQDN is also possible
|
|
-D WLED_DEBUG_PORT=1768 ;; port for network debugging. default = 7868
|
|
;; -D WLED_DISABLE_ESPNOW ;; might help in case of WiFi connectivity problems
|
|
; -D WLED_DISABLE_LOXONE ; FLASH 1272 bytes
|
|
; -D WLED_DISABLE_MQTT ; RAM 216 bytes; FLASH 16496 bytes
|
|
; -D WLED_DISABLE_INFRARED ;RAM 136 bytes; FLASH 24492 bytes ewowi: disabled to stay below 100%
|
|
; -D WLED_DISABLE_2D
|
|
; -D USERMOD_AUDIOREACTIVE
|
|
; -D USERMOD_ARTIFX ; to be done
|
|
; -UWLED_USE_MY_CONFIG
|
|
monitor_filters = esp8266_exception_decoder
|
|
; lib_ignore = IRremoteESP8266 ; use with WLED_DISABLE_INFRARED for faster compilation
|
|
; RAM: [====== ] 59.3% (used 48616 bytes from 81920 bytes)
|
|
; Flash: [======== ] 77.0% (used 804236 bytes from 1044464 bytes)
|
|
|
|
[env:esp8266pro_16MB_M]
|
|
extends = env:d1_mini
|
|
board = d1_mini_pro ;; "D1 mini pro": ESP8266EX, 160MHz, 80KB RAM, 16MB Flash
|
|
board_build.f_cpu = 160000000L ;; we want 160Mhz (default = 80Mhz)
|
|
;board_build.f_flash = 80000000L ;; for 80Mhz flash speed, in case your chip can handle it (default = 40Mhz)
|
|
board_build.flash_mode = qio ;; quad IO - fastest speed, in case your chip can handle it.
|
|
;;board_build.flash_mode = dout ;; use if your esp8266 becomes unstable with "qio"
|
|
board_build.ldscript = ${common.ldscript_16m14m} ;; 16MB flash, use 14MB for LittleFS
|
|
|
|
upload_speed = 460800 ;115200
|
|
build_flags = ${common.build_flags_esp8266}
|
|
-D WLED_RELEASE_NAME=esp8266pro_16MB_M
|
|
-D WLED_MAX_USERMODS=5 ; default only 4-6
|
|
-D WLED_DISABLE_ALEXA
|
|
-D WLED_DISABLE_HUESYNC
|
|
-D WLED_DISABLE_LOXONE
|
|
; -D USERMOD_AUDIOREACTIVE
|
|
; -D USERMOD_ARTIFX ; to be done
|
|
;; -D WLED_DISABLE_ESPNOW ;; might help in case of WiFi connectivity problems
|
|
-D USERMOD_PIRSWITCH
|
|
-D USERMOD_DALLASTEMPERATURE ;; disabled because it hangs during usermod setup on -S3 (autodetect broken?)
|
|
-D USERMOD_MULTI_RELAY
|
|
-D USE_ALT_DISPLAY ; new versions of USERMOD_FOUR_LINE_DISPLAY and USERMOD_ROTARY_ENCODER_UI
|
|
-D USERMOD_FOUR_LINE_DISPLAY
|
|
-D USERMOD_MPU6050_IMU ; gyro/accelero for USERMOD_GAMES (ONLY WORKS IF USERMOD_FOUR_LINE_DISPLAY NOT INCLUDED - I2C SHARING BUG)
|
|
-D USERMOD_GAMES ; WLEDMM usermod
|
|
-D WLED_DEBUG_HOST='"192.168.x.x"' ;; to send debug messages over network to host 192.168.x.y - FQDN is also possible
|
|
-D WLED_DEBUG_PORT=1768 ;; port for network debugging. default = 7868
|
|
; -D WLED_DEBUG
|
|
monitor_filters = esp8266_exception_decoder
|
|
lib_deps = ${esp8266.lib_deps}
|
|
OneWire@~2.3.5 ; used for USERMOD_FOUR_LINE_DISPLAY and USERMOD_DALLASTEMPERATURE
|
|
olikraus/U8g2 @ ^2.28.8 ; used for USERMOD_FOUR_LINE_DISPLAY
|
|
ElectronicCats/MPU6050 @ 0.6.0 ; used for USERMOD_MPU6050_IMU
|
|
; RAM: [====== ] 63.8% (used 52272 bytes from 81920 bytes)
|
|
; Flash: [========= ] 90.4% (used 944487 bytes from 1044464 bytes)
|
|
|
|
[env:esp01_1MB_S]
|
|
board = esp01_1m
|
|
platform = ${common.platform_wled_default}
|
|
platform_packages = ${common.platform_packages}
|
|
board_build.ldscript = ${common.ldscript_1m128k}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags_esp8266} -D WLED_DISABLE_OTA
|
|
-D WLED_RELEASE_NAME=esp01_1MB_S
|
|
-D WLED_DISABLE_ALEXA
|
|
-D WLED_DISABLE_HUESYNC
|
|
lib_deps = ${esp8266.lib_deps}
|
|
; RAM: [====== ] 59.5% (used 48748 bytes from 81920 bytes)
|
|
; Flash: [========= ] 90.7% (used 809992 bytes from 892912 bytes)
|
|
|
|
|
|
# ------------------------------------------------------------------------------
|
|
# MoonModules environments for IDF V4.4.x
|
|
# ------------------------------------------------------------------------------
|
|
;; Warning: the build-in LittleFS (arduino-esp32 2.0.x) seems to be "slightly different" from Lorol LittleFS.
|
|
;; When upgrading to the new framework, it might be necessary to first do a chip erase (make sure you have a backup of cfg.json and presets.json)
|
|
|
|
; compiled with ESP-IDF 4.4.1
|
|
[env:esp32_4MB_V4_S]
|
|
extends = esp32_4MB_V4_S_base
|
|
build_flags = ${esp32_4MB_V4_S_base.esp32_build_flags}
|
|
-D WLED_RELEASE_NAME=esp32_4MB_V4_S
|
|
-D WLED_WATCHDOG_TIMEOUT=0 #-D WLED_DISABLE_BROWNOUT_DET
|
|
-D ARDUINO_USB_CDC_ON_BOOT=0 ; needed for arduino-esp32 >=2.0.4; avoids errors on startup
|
|
-D WLEDMM_FASTPATH ; WLEDMM experimental option. Reduces audio lag (latency), and allows for faster LED framerates. May break compatibility with previous versions.
|
|
-D WLED_DISABLE_LOXONE
|
|
-D WLED_DISABLE_ALEXA
|
|
-D WLED_DISABLE_HUESYNC
|
|
-D WLED_DISABLE_MQTT
|
|
-D WLED_DISABLE_INFRARED
|
|
; -D WLED_DEBUG
|
|
; -D SR_DEBUG
|
|
; -D MIC_LOGGER
|
|
lib_deps = ${esp32_4MB_V4_S_base.esp32_lib_deps}
|
|
lib_ignore = IRremoteESP8266 ; use with WLED_DISABLE_INFRARED for faster compilation
|
|
; RAM: [=== ] 25.1% (used 82176 bytes from 327680 bytes)
|
|
; Flash: [========= ] 93.8% (used 1474893 bytes from 1572864 bytes)
|
|
|
|
; compiled with ESP-IDF 4.4.1
|
|
[env:esp32_4MB_V4_M]
|
|
extends = esp32_4MB_V4_M_base
|
|
build_flags = ${esp32_4MB_V4_M_base.esp32_build_flags}
|
|
-D WLED_RELEASE_NAME=esp32_4MB_V4_M
|
|
-D WLED_WATCHDOG_TIMEOUT=0 #-D WLED_DISABLE_BROWNOUT_DET
|
|
-D ARDUINO_USB_CDC_ON_BOOT=0 ; needed for arduino-esp32 >=2.0.4; avoids errors on startup
|
|
-D WLED_DISABLE_LOXONE ; FLASH 1272 bytes
|
|
-D WLED_DISABLE_ALEXA ; RAM 116 bytes; FLASH 13524 bytes
|
|
-D WLED_DISABLE_HUESYNC ;RAM 122 bytes; FLASH 6308 bytes
|
|
;-D WLED_DISABLE_MQTT ; RAM 216 bytes; FLASH 16496 bytes
|
|
-D WLED_DISABLE_INFRARED ;RAM 136 bytes; FLASH 24492 bytes ;; softhack007 disabled to stay below 100% flash size
|
|
lib_deps = ${esp32_4MB_V4_M_base.esp32_lib_deps}
|
|
lib_ignore = IRremoteESP8266 ; use with WLED_DISABLE_INFRARED for faster compilation
|
|
build_unflags = ${esp32_4MB_V4_M_base.build_unflags}
|
|
-D USERMOD_ANIMARTRIX ;; Tips our memory usage over the limit
|
|
|
|
;; RAM: [=== ] 25.9% (used 84708 bytes from 327680 bytes)
|
|
;; Flash: [==========] 98.5% (used 1549033 bytes from 1572864 bytes)
|
|
|
|
;; V4 build for 16MB flash, optimized for speed
|
|
[env:esp32_16MB_V4_S]
|
|
extends = esp32_4MB_V4_S_base
|
|
build_unflags = ${esp32_4MB_V4_S_base.build_unflags}
|
|
${Speed_Flags.build_unflags} ;; to override -Os
|
|
build_flags = ${esp32_4MB_V4_S_base.esp32_build_flags}
|
|
${Speed_Flags.build_flags} ;; optimize for speed instead of size
|
|
-D WLED_RELEASE_NAME=esp32_16MB_V4_S
|
|
-D WLED_WATCHDOG_TIMEOUT=0 #-D WLED_DISABLE_BROWNOUT_DET
|
|
-D ARDUINO_USB_CDC_ON_BOOT=0 ; needed for arduino-esp32 >=2.0.4; avoids errors on startup
|
|
-D WLEDMM_FASTPATH ; WLEDMM experimental option. Reduces audio lag (latency), and allows for faster LED framerates. May break compatibility with previous versions.
|
|
;; ${common_mm.animartrix_build_flags} ;; breaks the build - Internal Compiler Error
|
|
lib_deps = ${esp32_4MB_V4_S_base.esp32_lib_deps}
|
|
;; ${common_mm.animartrix_lib_deps}
|
|
board = esp32_16MB
|
|
board_build.partitions = tools/WLED_ESP32_16MB.csv ;; WLED standard for 16MB flash: 2MB firmware, 12 MB filesystem
|
|
;board_build.partitions = tools/WLED_ESP32_16MB_9MB_FS.csv ;; WLED extended for 16MB flash: 3.2MB firmware, 9 MB filesystem
|
|
;; normal build
|
|
; RAM: [=== ] 25.4% (used 83312 bytes from 327680 bytes)
|
|
; Flash: [======= ] 73.3% (used 1536317 bytes from 2097152 bytes)
|
|
;; optimized-for-speed build
|
|
; RAM: [=== ] 26.1% (used 85396 bytes from 327680 bytes)
|
|
; Flash: [======== ] 82.8% (used 1736129 bytes from 2097152 bytes)
|
|
|
|
; compiled with ESP-IDF 4.4.1
|
|
[env:esp32_16MB_V4_M]
|
|
extends = esp32_4MB_V4_M_base
|
|
build_flags = ${esp32_4MB_V4_M_base.esp32_build_flags}
|
|
-D WLED_RELEASE_NAME=esp32_16MB_V4_M
|
|
-D WLED_WATCHDOG_TIMEOUT=0 #-D WLED_DISABLE_BROWNOUT_DET
|
|
-D ARDUINO_USB_CDC_ON_BOOT=0 ; needed for arduino-esp32 >=2.0.4; avoids errors on startup
|
|
;; -D WLED_ENABLE_DMX ;; disabled because it does not work with ESP-IDF 4.4.x (buggy driver in SparkFunDMX)
|
|
-D WLED_ENABLE_DMX_INPUT ;; needs more testing
|
|
-D LEDPIN=16 -D RLYPIN=19
|
|
-D AUDIOPIN=-1 -D TEMPERATURE_PIN=23 -D PIR_SENSOR_PIN=-1 -D PWM_PIN=-1
|
|
-D ENCODER_DT_PIN=35 -D ENCODER_CLK_PIN=39 -D ENCODER_SW_PIN=5 ; WLEDMM spec by @SERG74: use 35 and 39 instead of 18 and 19 (conflicts)
|
|
-D FLD_PIN_SCL=-1 -D FLD_PIN_SDA=-1 ; use global!
|
|
-D HW_PIN_SCL=22 -D HW_PIN_SDA=21
|
|
lib_deps = ${esp32_4MB_V4_M_base.esp32_lib_deps}
|
|
board = esp32_16MB
|
|
board_build.partitions = tools/WLED_ESP32_16MB.csv ;; WLED standard for 16MB flash: 2MB firmware, 12 MB filesystem
|
|
;board_build.partitions = tools/WLED_ESP32_16MB_9MB_FS.csv ;; WLED extended for 16MB flash: 3.2MB firmware, 9 MB filesystem
|
|
; RAM: [== ] 24.8% (used 81316 bytes from 327680 bytes)
|
|
; Flash: [======= ] 72.9% (used 1528253 bytes from 2097152 bytes)
|
|
|
|
[env:esp32_16MB_V4_M_debug]
|
|
extends = esp32_4MB_V4_M_base
|
|
build_unflags = ${common.build_unflags}
|
|
-D CORE_DEBUG_LEVEL=0
|
|
build_flags = ${esp32_4MB_V4_M_base.esp32_build_flags}
|
|
${Debug_Flags.build_flags}
|
|
-D CORE_DEBUG_LEVEL=4 ;; 0=none, 1=error, 2=warning, 3=info, 4=debug, 5=verbose
|
|
-D WLED_DEBUG_HEAP ;; WLEDMM enable heap debugging
|
|
-D WLED_RELEASE_NAME=esp32_16MB_V4_M_debug
|
|
-D WLED_WATCHDOG_TIMEOUT=0 #-D WLED_DISABLE_BROWNOUT_DET
|
|
-D ARDUINO_USB_CDC_ON_BOOT=0 ; needed for arduino-esp32 >=2.0.4; avoids errors on startup
|
|
lib_deps = ${esp32_4MB_V4_M_base.esp32_lib_deps}
|
|
board = esp32_16MB
|
|
board_build.partitions = tools/WLED_ESP32_16MB.csv ;; WLED standard for 16MB flash: 2MB firmware, 12 MB filesystem
|
|
;board_build.partitions = tools/WLED_ESP32_16MB_9MB_FS.csv ;; WLED extended for 16MB flash: 3.2MB firmware, 9 MB filesystem
|
|
monitor_filters = esp32_exception_decoder
|
|
; RAM: [=== ] 25.0% (used 82008 bytes from 327680 bytes)
|
|
; Flash: [======== ] 78.1% (used 1638193 bytes from 2097152 bytes) WLEDMM: Earlier 76.9
|
|
|
|
;; experimental environment for boards with PSRAM (needs ESP-IDF 4.4.1).
|
|
[env:esp32_4MB_PSRAM_S]
|
|
extends = esp32_4MB_V4_S_base
|
|
board = lolin_d32_pro
|
|
;board = esp32cam
|
|
build_flags = ${esp32_4MB_V4_S_base.esp32_build_flags}
|
|
-D WLED_RELEASE_NAME=esp32_4MB_PSRAM_S
|
|
-D WLED_WATCHDOG_TIMEOUT=0 #-D WLED_DISABLE_BROWNOUT_DET
|
|
-D ARDUINO_USB_CDC_ON_BOOT=0 ; needed for arduino-esp32 >=2.0.4; avoids errors on startup
|
|
-D WLEDMM_FASTPATH ; WLEDMM experimental option. Reduces audio lag (latency), and allows for faster LED framerates. May break compatibility with previous versions.
|
|
-DBOARD_HAS_PSRAM -D WLED_USE_PSRAM_JSON ;; -D WLED_USE_PSRAM ;; WLED_USE_PSRAM causes major slow-down (slow LEDs) on some ESP32 boards
|
|
;; -DALL_JSON_TO_PSRAM ;; WLEDMM experimental --> try to force all JSON stuff into PSRAM; gives more free heap.
|
|
-D WLED_DISABLE_LOXONE ; FLASH 1272 bytes
|
|
-D WLED_DISABLE_HUESYNC ; RAM 122 bytes; FLASH 6308 bytes
|
|
-D WLED_DISABLE_ALEXA ; RAM 116 bytes; FLASH 13524 bytes
|
|
-D WLED_DISABLE_MQTT ; RAM 216 bytes; FLASH 16496 bytes
|
|
-D WLED_DISABLE_INFRARED ;RAM 136 bytes; FLASH 24492 bytes ewowi: disabled to stay below 100%
|
|
; -D WLED_ENABLE_DMX
|
|
; -D WLED_DEBUG
|
|
; -D SR_DEBUG
|
|
; -D MIC_LOGGER
|
|
lib_deps = ${esp32_4MB_V4_S_base.esp32_lib_deps}
|
|
lib_ignore = IRremoteESP8266 ; use with WLED_DISABLE_INFRARED for faster compilation
|
|
;; RAM: [== ] 24.3% (used 79524 bytes from 327680 bytes)
|
|
;; Flash: [========= ] 93.2% (used 1466389 bytes from 1572864 bytes)
|
|
|
|
;; similar to 4MB_PSRAM_S, but optimized for WROVER-E (chip revision >= 3) that doesn't need any workarounds for PSRAM any more
|
|
;; tl;dr: its faster on PSRAM. But it will not work on all boards.
|
|
[env:esp32_4MB_PSRAM_REV3_S]
|
|
extends = esp32_4MB_V4_S_base
|
|
;board = esp32cam
|
|
board = lolin_d32_pro
|
|
;board_build.partitions = tools/WLED_ESP32_4MB_256KB_FS.csv ;; Alternative for 4MB flash: 1.8MB firmware, 256KB filesystem (esptool erase_flash needed before changing)
|
|
build_unflags = ${esp32_4MB_V4_S_base.build_unflags}
|
|
;;${Speed_Flags.build_unflags} ;; to override -Os
|
|
-DARDUINO_EVENT_RUNNING_CORE=1 ;; we want to run wifi on core0, so remove the standard flag
|
|
-mfix-esp32-psram-cache-issue ;; this fix is not needed any more for revision 3
|
|
-mfix-esp32-psram-cache-strategy=memw ;; same as above
|
|
|
|
build_flags = ${esp32_4MB_V4_S_base.esp32_build_flags}
|
|
-DARDUINO_EVENT_RUNNING_CORE=0 ;; assign Wifi to core0, to have more CPU on core#1 (arduino loop)
|
|
-DARDUINO_RUNNING_CORE=1 ;; should be default, but does not hurt
|
|
-DCONFIG_MBEDTLS_DYNAMIC_BUFFER=1 ;; optional - seems to move more buffers into PSRAM
|
|
;;${Speed_Flags.build_flags} ;; optimize for speed instead of size --> over 100% flash, but works with 256KB filesystem (alternative partitions file)
|
|
-D WLEDMM_FASTPATH ; WLEDMM experimental option. Reduces audio lag (latency), and allows for faster LED framerates. May break compatibility with previous versions.
|
|
-DBOARD_HAS_PSRAM -D WLED_USE_PSRAM_JSON ;; -D WLED_USE_PSRAM ;; WLED_USE_PSRAM causes major slow-down (slow LEDs) on some ESP32 boards
|
|
;; -DALL_JSON_TO_PSRAM ;; WLEDMM experimental --> try to force all JSON stuff into PSRAM; gives more free heap.
|
|
;;-D CONFIG_ESP32_REV_MIN=3 ;; disables PSRAM bug workarounds in the core, reducing the code size and improving overall performance.
|
|
-D WLED_RELEASE_NAME=esp32_4MB_PSRAM_REV3_S
|
|
-D WLED_WATCHDOG_TIMEOUT=0 #-D WLED_DISABLE_BROWNOUT_DET
|
|
-D ARDUINO_USB_CDC_ON_BOOT=0 ; needed for arduino-esp32 >=2.0.4; avoids errors on startup
|
|
-D WLED_DISABLE_LOXONE ; FLASH 1272 bytes
|
|
-D WLED_DISABLE_HUESYNC ; RAM 122 bytes; FLASH 6308 bytes
|
|
-D WLED_DISABLE_ALEXA ; RAM 116 bytes; FLASH 13524 bytes
|
|
-D WLED_DISABLE_MQTT ; RAM 216 bytes; FLASH 16496 bytes
|
|
-D WLED_DISABLE_INFRARED ;RAM 136 bytes; FLASH 24492 bytes ewowi: disabled to stay below 100%
|
|
;-D WLED_DISABLE_ADALIGHT ;; To disable serial protocols (see upstream #3128)
|
|
; -D WLED_ENABLE_DMX
|
|
; -D WLED_DEBUG
|
|
; -D SR_DEBUG
|
|
; -D MIC_LOGGER
|
|
lib_deps = ${esp32_4MB_V4_S_base.esp32_lib_deps}
|
|
lib_ignore = IRremoteESP8266 ; use with WLED_DISABLE_INFRARED for faster compilation
|
|
;; RAM: [==== ] 35.9% (used 117688 bytes from 327680 bytes)
|
|
;; Flash: [========= ] 94.5% (used 1487097 bytes from 1572864 bytes)
|
|
|
|
;; PSRAM build env that only leaves 300Kb for filesystem (instead of 1MB), but adds 300kB for program space
|
|
[env:esp32_4MB_PSRAM_M]
|
|
extends = esp32_4MB_V4_M_base
|
|
board = lolin_d32_pro
|
|
;board = esp32cam
|
|
board_build.partitions = tools/WLED_ESP32_4MB_256KB_FS.csv ;; 1.8MB firmware, 256KB filesystem (esptool erase_flash needed when changing from "standard WLED" partitions)
|
|
build_flags = ${esp32_4MB_V4_M_base.esp32_build_flags}
|
|
-D WLED_RELEASE_NAME=esp32_4MB_PSRAM_M
|
|
-D WLED_WATCHDOG_TIMEOUT=0 #-D WLED_DISABLE_BROWNOUT_DET
|
|
-D ARDUINO_USB_CDC_ON_BOOT=0 ; needed for arduino-esp32 >=2.0.4; avoids errors on startup
|
|
-DBOARD_HAS_PSRAM -D WLED_USE_PSRAM_JSON ;; -D WLED_USE_PSRAM ;; WLED_USE_PSRAM causes major slow-down (slow LEDs) on some ESP32 boards
|
|
-D WLED_DISABLE_LOXONE ;; FLASH 1272 bytes
|
|
-D WLED_DISABLE_HUESYNC ;; RAM 122 bytes; FLASH 6308 bytes
|
|
-D WLED_DISABLE_ALEXA ;; RAM 116 bytes; FLASH 13524 bytes
|
|
; -D WLED_DISABLE_MQTT ;; RAM 216 bytes; FLASH 16496 bytes
|
|
; -D WLED_DISABLE_INFRARED ;;RAM 136 bytes; FLASH 24492 bytes
|
|
; -D WLED_ENABLE_DMX
|
|
; -D WLED_DEBUG
|
|
; -D SR_DEBUG
|
|
; -D MIC_LOGGER
|
|
lib_deps = ${esp32_4MB_V4_M_base.esp32_lib_deps}
|
|
;lib_ignore = IRremoteESP8266 ; use with WLED_DISABLE_INFRARED for faster compilation
|
|
;; RAM: [== ] 24.9% (used 81484 bytes from 327680 bytes)
|
|
;; Flash: [======== ] 84.6% (used 1607857 bytes from 1900544 bytes)
|
|
|
|
|
|
[env:esp32S3_8MB_M]
|
|
extends = esp32_4MB_V4_M_base
|
|
board = esp32-s3-devkitc-1
|
|
build_unflags =
|
|
-D USERMOD_DALLASTEMPERATURE ;; disabled because it hangs during usermod setup on -S3 (autodetect broken?)
|
|
-D USE_ALT_DISPLAY ;; four line display seems to have problems with I2C - it hangs during usermod setup
|
|
-D USERMOD_FOUR_LINE_DISPLAY ;; see above
|
|
-D USERMOD_ROTARY_ENCODER_UI ;; see above
|
|
-D WLED_ENABLE_DMX ;; disabled because it does not work with ESP-IDF 4.4.x (buggy driver in SparkFunDMX)
|
|
|
|
build_flags = ${common.build_flags} ${esp32s3.build_flags} -Wno-misleading-indentation -Wno-format-truncation
|
|
${common_mm.build_flags_S} ${common_mm.build_flags_M}
|
|
; -DBOARD_HAS_PSRAM -D WLED_USE_PSRAM_JSON -D WLED_USE_PSRAM ;; un-comment in case your board supports PSRAM
|
|
-D WLED_RELEASE_NAME=esp32S3_8MB_M
|
|
-DARDUINO_USB_MODE=1 -DARDUINO_USB_CDC_ON_BOOT=0 -DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_USB_DFU_ON_BOOT=0 ;; for Serial-to-USB chip
|
|
;;-DARDUINO_USB_MODE=1 -DARDUINO_USB_CDC_ON_BOOT=1 -DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_USB_DFU_ON_BOOT=1 ;; for Hardware-CDC USB mode
|
|
;;-D WLED_DISABLE_ADALIGHT ;; disables serial protocols - recommended for Hardware-CDC USB (Serial RX will receive junk commands when RX pin is unconnected, unless its pulled down by resistor)
|
|
-D WLED_WATCHDOG_TIMEOUT=0 -D CONFIG_ASYNC_TCP_USE_WDT=0
|
|
; -D U8X8_HAVE_2ND_HW_I2C ;; experimental - tells U8g2 lib that a second HW I2C unit exists
|
|
-D WLED_DISABLE_LOXONE ; FLASH 1272 bytes
|
|
-D WLED_DISABLE_ALEXA ; RAM 116 bytes; FLASH 13524 bytes
|
|
; -D WLED_DISABLE_MQTT ; RAM 216 bytes; FLASH 16496 bytes
|
|
; -D WLED_DISABLE_HUESYNC ;RAM 122 bytes; FLASH 6308 bytes
|
|
; -D WLED_DISABLE_INFRARED ;RAM 136 bytes; FLASH 24492 bytes
|
|
;;-D WLEDMM_FASTPATH ; WLEDMM experimental option. Reduces audio lag (latency), and allows for faster LED framerates. May break compatibility with previous versions.
|
|
-D LEDPIN=4
|
|
;-D STATUSLED=39
|
|
-D BTNPIN=48
|
|
-D RLYPIN=21
|
|
-D IRPIN=15
|
|
-D HW_PIN_SDA=42 ;; ESP32-S3 default: SDA = 8
|
|
-D HW_PIN_SCL=41 ;; ESP32-S3 default: SCL = 9
|
|
-D AUDIOPIN=-1
|
|
-D SR_DMTYPE=1 -D I2S_SDPIN=16 -D I2S_CKPIN=17 -D I2S_WSPIN=47 -D MCLK_PIN=40
|
|
-D ES7243_SDAPIN=8 -D ES7243_SCLPIN=18
|
|
; -D WLED_DEBUG
|
|
; -D SR_DEBUG
|
|
; -D MIC_LOGGER
|
|
lib_deps = ${esp32s3.lib_deps} ${common_mm.lib_deps_S} ${common_mm.lib_deps_V4_M}
|
|
;lib_ignore = IRremoteESP8266 ; use with WLED_DISABLE_INFRARED for faster compilation
|
|
board_build.partitions = tools/WLED_ESP32_8MB.csv
|
|
board_build.flash_mode = qio
|
|
; RAM: [=== ] 25.4% (used 83320 bytes from 327680 bytes)
|
|
; Flash: [======= ] 70.6% (used 1479573 bytes from 2097152 bytes)
|
|
|
|
;; MM for ESP32-S3 PSRAM development board, with 8MB FLASH and >= 8MB PSRAM (memory_type: qio_opi)
|
|
[env:esp32S3_8MB_PSRAM_M]
|
|
extends = esp32_4MB_V4_M_base
|
|
|
|
board = esp32-s3-devkitc-1 ;; generic S3 dev board; the next line adds PSRAM support
|
|
board_build.arduino.memory_type = qio_opi ;; use with PSRAM: 8MB or 16MB
|
|
;; board_build.arduino.memory_type = qio_qspi ;; use with PSRAM: 2MB or 4MB
|
|
board_build.flash_mode = qio ;; use "dio" if your board gets unstable with "qio"; also change then previous lines accordingly (memory_type)
|
|
|
|
build_unflags = ${env:esp32S3_8MB_M.build_unflags} ;; use the same as "normal" S3 buildenv
|
|
build_flags = ${common.build_flags} ${esp32s3.build_flags} -Wno-misleading-indentation -Wno-format-truncation
|
|
${common_mm.build_flags_S} ${common_mm.build_flags_M}
|
|
-DBOARD_HAS_PSRAM -D WLED_USE_PSRAM_JSON ;; -D WLED_USE_PSRAM ;; your board supports PSRAM
|
|
-D WLED_RELEASE_NAME=esp32S3_8MB_PSRAM_M
|
|
-DARDUINO_USB_MODE=1 -DARDUINO_USB_CDC_ON_BOOT=0 -DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_USB_DFU_ON_BOOT=0 ;; for Serial-to-USB chip
|
|
;;-DARDUINO_USB_MODE=1 -DARDUINO_USB_CDC_ON_BOOT=1 -DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_USB_DFU_ON_BOOT=1 ;; for Hardware-CDC USB mode
|
|
;;-D WLED_DISABLE_ADALIGHT ;; disables serial protocols - recommended for Hardware-CDC USB (Serial RX will receive junk commands when RX pin is unconnected, unless its pulled down by resistor)
|
|
-D WLED_WATCHDOG_TIMEOUT=0 -D CONFIG_ASYNC_TCP_USE_WDT=0
|
|
;;-D WLEDMM_FASTPATH ; WLEDMM experimental option. Reduces audio lag (latency), and allows for faster LED framerates. May break compatibility with previous versions.
|
|
-D WLED_DISABLE_LOXONE ; FLASH 1272 bytes
|
|
-D WLED_DISABLE_ALEXA ; RAM 116 bytes; FLASH 13524 bytes
|
|
; -D WLED_DISABLE_MQTT ; RAM 216 bytes; FLASH 16496 bytes
|
|
; -D WLED_DISABLE_HUESYNC ;RAM 122 bytes; FLASH 6308 bytes
|
|
; -D WLED_DISABLE_INFRARED ;RAM 136 bytes; FLASH 24492 bytes
|
|
-D LEDPIN=21
|
|
;;-D DATA_PINS=21,48,3 -D PIXEL_COUNTS=30,1,144 ;; just an example: my board has a builtin neopixel on gpio48
|
|
; -D STATUSLED=2
|
|
-D BTNPIN=0 -D RLYPIN=1 -D IRPIN=-1
|
|
-D HW_PIN_SDA=42 -D HW_PIN_SCL=41
|
|
-D AUDIOPIN=-1
|
|
-D SR_DMTYPE=1 -D I2S_SDPIN=14 -D I2S_CKPIN=45 -D I2S_WSPIN=47 -D MCLK_PIN=46
|
|
;;-D ES7243_SDAPIN=8 -D ES7243_SCLPIN=18
|
|
; -D WLED_DEBUG
|
|
; -D SR_DEBUG
|
|
; -D MIC_LOGGER
|
|
lib_deps = ${esp32s3.lib_deps} ${common_mm.lib_deps_S} ${common_mm.lib_deps_V4_M}
|
|
;lib_ignore = IRremoteESP8266 ; use with WLED_DISABLE_INFRARED for faster compilation
|
|
board_build.partitions = tools/WLED_ESP32_8MB.csv
|
|
; RAM: [==== ] 36.3% (used 118828 bytes from 327680 bytes)
|
|
; Flash: [======= ] 70.7% (used 1483465 bytes from 2097152 bytes)
|
|
|
|
;; MM for ESP32-S3 boards - FASTPATH + optimize for speed
|
|
[env:esp32S3_8MB_S]
|
|
extends = esp32_4MB_V4_M_base
|
|
board = esp32-s3-devkitc-1 ;; generic S3 dev board
|
|
board_build.flash_mode = qio ;; use "dio" if your board gets unstable with "qio"
|
|
build_unflags = ${env:esp32S3_8MB_M.build_unflags} ;; use the same as "normal" S3 buildenv
|
|
${Speed_Flags.build_unflags} ;; to override -Os
|
|
build_flags = ${common.build_flags} ${esp32s3.build_flags} -Wno-misleading-indentation -Wno-format-truncation
|
|
${common_mm.build_flags_S}
|
|
-D WLED_RELEASE_NAME=esp32S3_8MB_S
|
|
-DARDUINO_USB_MODE=1 -DARDUINO_USB_CDC_ON_BOOT=0 -DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_USB_DFU_ON_BOOT=0 ;; for Serial-to-USB chip
|
|
;;-DARDUINO_USB_MODE=1 -DARDUINO_USB_CDC_ON_BOOT=1 -DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_USB_DFU_ON_BOOT=1 ;; for Hardware-CDC USB mode
|
|
;;-D WLED_DISABLE_ADALIGHT ;; disables serial protocols - recommended for Hardware-CDC USB (Serial RX will receive junk commands when RX pin is unconnected, unless its pulled down by resistor)
|
|
${Speed_Flags.build_flags} ;; optimize for speed instead of size
|
|
-D WLEDMM_FASTPATH ; WLEDMM experimental option. Reduces audio lag (latency), and allows for faster LED framerates. May break compatibility with previous versions.
|
|
${common_mm.animartrix_build_flags}
|
|
-D WLED_WATCHDOG_TIMEOUT=0 -D CONFIG_ASYNC_TCP_USE_WDT=0
|
|
-D WLED_DISABLE_LOXONE ; FLASH 1272 bytes
|
|
-D WLED_DISABLE_ALEXA ; RAM 116 bytes; FLASH 13524 bytes
|
|
-D WLED_DISABLE_MQTT ; RAM 216 bytes; FLASH 16496 bytes
|
|
-D WLED_DISABLE_HUESYNC ;RAM 122 bytes; FLASH 6308 bytes
|
|
-D WLED_DISABLE_INFRARED ;RAM 136 bytes; FLASH 24492 bytes
|
|
-D LEDPIN=4
|
|
;-D STATUSLED=39
|
|
-D BTNPIN=48
|
|
-D RLYPIN=21
|
|
-D IRPIN=15
|
|
-D HW_PIN_SDA=42 ;; ESP32-S3 default: SDA = 8
|
|
-D HW_PIN_SCL=41 ;; ESP32-S3 default: SCL = 9
|
|
-D AUDIOPIN=-1
|
|
-D SR_DMTYPE=1 -D I2S_SDPIN=16 -D I2S_CKPIN=17 -D I2S_WSPIN=47 -D MCLK_PIN=40
|
|
-D ES7243_SDAPIN=8 -D ES7243_SCLPIN=18
|
|
; -D WLED_DEBUG
|
|
; -D SR_DEBUG
|
|
; -D MIC_LOGGER
|
|
lib_deps = ${esp32s3.lib_deps} ${common_mm.lib_deps_S}
|
|
${common_mm.animartrix_lib_deps}
|
|
lib_ignore = IRremoteESP8266 ; use with WLED_DISABLE_INFRARED for faster compilation
|
|
board_build.partitions = tools/WLED_ESP32_8MB.csv
|
|
;; normal build
|
|
; RAM: [== ] 24.9% (used 81656 bytes from 327680 bytes)
|
|
; Flash: [======= ] 66.1% (used 1386229 bytes from 2097152 bytes)
|
|
;; optimized-for-speed build
|
|
; RAM: [=== ] 25.8% (used 84544 bytes from 327680 bytes)
|
|
; Flash: [======== ] 78.1% (used 1638737 bytes from 2097152 bytes)
|
|
|
|
|
|
;; MM for Adafruit QT Py ESP32-S2 -> 4MB flash, PSRAM, and tinyUF2 bootloader
|
|
;; to ewowi - i'll optimize this entry later, as a few things can be inherited for sure. To softhack: sure ;-)
|
|
[env:esp32s2_tinyUF2_PSRAM_S]
|
|
extends = esp32_4MB_V4_S_base
|
|
platform = ${esp32s2.platform} ;; using 5.2.0, due to massive connectivity problems on -S2 with 5.3.0
|
|
platform_packages = ${esp32s2.platform_packages}
|
|
|
|
board = adafruit_qtpy_esp32s2
|
|
board_build.partitions = tools/partitions-4MB_spiffs-tinyuf2.csv ;; this is needed for tinyUF2 bootloader! Filename has to end in "tinyuf2.csv"
|
|
board_build.f_flash = 80000000L
|
|
board_build.flash_mode = qio
|
|
upload_speed = 256000 ;; 921600
|
|
build_unflags = ${common.build_unflags}
|
|
-D USERMOD_DALLASTEMPERATURE ;; disabled because it hangs during usermod setup on -S3 (autodetect broken?)
|
|
-D WLED_ENABLE_DMX ;; disabled because it does not work with ESP-IDF 4.4.x (buggy driver in SparkFunDMX)
|
|
-D WLED_ENABLE_DMX_INPUT ;; needs more testing
|
|
-DWLEDMM_FASTPATH ;; needs more testing on -S2
|
|
|
|
build_flags = ${common.build_flags} ${esp32s2.build_flags}
|
|
; ${Debug_Flags.build_flags} ;ewowi: enabling debug causes Error: The program size (1463330 bytes) is greater than maximum allowed (1441792 bytes)
|
|
-D WLED_WATCHDOG_TIMEOUT=0 -D CONFIG_ASYNC_TCP_USE_WDT=0
|
|
${common_mm.build_flags_S}
|
|
-Wno-misleading-indentation -Wno-format-truncation
|
|
-DCONFIG_MBEDTLS_DYNAMIC_BUFFER=1 ;; optional - allows some buffers to use PSRAM
|
|
-D WLED_RELEASE_NAME=esp32S2_4MB_UF2_S
|
|
-DARDUINO_USB_CDC_ON_BOOT=1 ;; mandatory, otherwise USB does not work!!
|
|
-D WLED_DISABLE_ADALIGHT ;; disables serial protocols when using CDC USB (Serial RX will receive junk commands, unless its pulled down by resistor)
|
|
-DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_USB_DFU_ON_BOOT=0
|
|
-D SERVERNAME='"WLED-S2"'
|
|
-DBOARD_HAS_PSRAM -D WLED_USE_PSRAM_JSON ;; -D WLED_USE_PSRAM
|
|
-DALL_JSON_TO_PSRAM ;; WLEDMM experimental --> try to force all JSON stuff into PSRAM; gives more free heap.
|
|
-D WLED_DISABLE_LOXONE ;; FLASH 1272 bytes
|
|
-D WLED_DISABLE_HUESYNC ;; RAM 122 bytes; FLASH 6308 bytes
|
|
-D WLED_DISABLE_ALEXA ;; RAM 116 bytes; FLASH 13524 bytes
|
|
; -D WLED_DISABLE_MQTT ;; RAM 216 bytes; FLASH 16496 bytes
|
|
-D WLED_DISABLE_INFRARED ;; RAM 136 bytes; FLASH 24492 bytes
|
|
-D LEDPIN=39 ;; onboard neopixel LED. Attach your own LEDs to GPIO 7 or GPIO 6
|
|
-D BTNPIN=0
|
|
;-D RLYPIN=6
|
|
;-D IRPIN=7
|
|
-D HW_PIN_SCL=40 -D HW_PIN_SDA=41
|
|
-D HW_PIN_MOSISPI=35 ;WLEDMM renamed from HW_PIN_DATASPI
|
|
-D HW_PIN_CLOCKSPI=36
|
|
-D HW_PIN_MISOSPI=37
|
|
-D AUDIOPIN=-1
|
|
-D SR_DMTYPE=1 -D I2S_SDPIN=9 -D I2S_WSPIN=8 -D I2S_CKPIN=17 -D MCLK_PIN=18
|
|
;-D STATUSLED=-1
|
|
-D WLED_USE_MY_CONFIG
|
|
lib_deps = ${esp32s2.lib_deps} ${common_mm.lib_deps_S}
|
|
lib_ignore =
|
|
IRremoteESP8266 ; use with WLED_DISABLE_INFRARED for faster compilation
|
|
OneWire ; not needed as we don't include USERMOD_DALLASTEMPERATURE
|
|
monitor_filters = esp32_exception_decoder
|
|
; RAM: [=== ] 33.0% (used 108276 bytes from 327680 bytes)
|
|
; Flash: [==========] 97.9% (used 1411114 bytes from 1441792 bytes) !!! 98%
|
|
|
|
;; MM environment for generic ESP32-S2, with PSRAM, 4MB flash (300kB filesystem to have more program space)
|
|
;; PINs assignments optimized for use with serg74 "mini shield"
|
|
[env:esp32s2_PSRAM_M]
|
|
extends = esp32_4MB_V4_M_base
|
|
platform = ${esp32s2.platform} ;; using 5.2.0, due to massive connectivity problems on -S2 with 5.3.0
|
|
platform_packages = ${esp32s2.platform_packages}
|
|
|
|
board = lolin_s2_mini
|
|
board_build.partitions = tools/WLED_ESP32_4MB_256KB_FS.csv ;; 1.8MB firmware, 256KB filesystem (esptool erase_flash needed when changing from "standard WLED" partitions)
|
|
board_build.flash_mode = dio
|
|
upload_speed = 256000 ;; 921600
|
|
build_unflags = ${common.build_unflags}
|
|
-DARDUINO_USB_CDC_ON_BOOT=1
|
|
-DARDUINO_USB_DFU_ON_BOOT=0
|
|
-D USERMOD_DALLASTEMPERATURE ;; disabled because it hangs during usermod setup on -S3 (autodetect broken?)
|
|
-D WLED_ENABLE_DMX ;; disabled because it does not work with ESP-IDF 4.4.x (buggy driver in SparkFunDMX)
|
|
-D WLED_ENABLE_DMX_INPUT ;; needs more testing
|
|
-DWLEDMM_FASTPATH ;; needs more testing on -S2
|
|
build_flags = ${common.build_flags} ${esp32s2.build_flags}
|
|
;; ${Debug_Flags.build_flags}
|
|
-D WLED_WATCHDOG_TIMEOUT=0 -D CONFIG_ASYNC_TCP_USE_WDT=0
|
|
${common_mm.build_flags_S} ${common_mm.build_flags_M}
|
|
-Wno-misleading-indentation -Wno-format-truncation
|
|
-D WLED_RELEASE_NAME=esp32s2_4MB_M
|
|
-DBOARD_HAS_PSRAM -D WLED_USE_PSRAM_JSON ;; -D WLED_USE_PSRAM
|
|
;; -DALL_JSON_TO_PSRAM ;; WLEDMM experimental --> try to force all JSON stuff into PSRAM; gives more free heap.
|
|
-DLOLIN_WIFI_FIX -DWLEDMM_WIFI_POWERON_HACK ;; seems to work much better with this
|
|
-DARDUINO_USB_CDC_ON_BOOT=0 -DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_USB_DFU_ON_BOOT=1
|
|
-D WLED_DISABLE_ADALIGHT ;; disables serial protocols, as the board only has CDC USB
|
|
-D WLED_DISABLE_INFRARED ;; save flash space
|
|
-D WLED_DISABLE_ALEXA ;; save flash space
|
|
-D WLED_DISABLE_HUESYNC ;; save flash space
|
|
-D WLED_DISABLE_LOXONE ;; save flash space
|
|
-D AUDIOPIN=-1
|
|
-D BTNPIN=-1 -D IRPIN=-1
|
|
-D LEDPIN=16 ;; second led pin = 18
|
|
-D HW_PIN_SCL=35 -D HW_PIN_SDA=33
|
|
-D RLYPIN=9
|
|
;; -D HW_PIN_MOSISPI=11 -D HW_PIN_CLOCKSPI=7 -D HW_PIN_MISOSPI=9 ;; 9 already in use for RELAY, 7 for IR
|
|
-D SR_DMTYPE=1 -D I2S_SDPIN=34 -D I2S_CKPIN=14 -D I2S_WSPIN=17 -D MCLK_PIN=-1 ;; recommended for mini shield
|
|
;; -D FFTTASK_PRIORITY=2 ;; useful for testing FFT timing. reduces audio latency, but makes effects slower.
|
|
;; -D STATUSLED=15
|
|
-D WLED_USE_MY_CONFIG
|
|
lib_deps = ${esp32s2.lib_deps} ${common_mm.lib_deps_S} ${common_mm.lib_deps_V4_M}
|
|
lib_ignore =
|
|
IRremoteESP8266 ; use with WLED_DISABLE_INFRARED for faster compilation
|
|
OneWire ; not needed as we don't include USERMOD_DALLASTEMPERATURE
|
|
monitor_filters = esp32_exception_decoder
|
|
; RAM: [=== ] 29.7% (used 97376 bytes from 327680 bytes)
|
|
; Flash: [======== ] 81.4% (used 1547834 bytes from 1900544 bytes)
|
|
|
|
|
|
;; MM environment for generic ESP32-C3 -> 4MB flash, no PSRAM
|
|
[env:esp32c3dev_4MB_M]
|
|
extends = esp32_4MB_V4_S_base
|
|
;board_build.flash_mode = dout
|
|
platform = ${esp32.platformV4}
|
|
platform_packages = ${esp32.platformV4_packages}
|
|
board_build.flash_mode = qio
|
|
board = esp32-c3-devkitm-1
|
|
;board_build.partitions = tools/WLED_ESP32_4MB_256KB_FS.csv ;; 1.8MB firmware, 256KB filesystem (esptool erase_flash needed when changing from "standard WLED" partitions)
|
|
;board_build.partitions = tools/WLED_ESP32_2MB_noOTA.csv ;; use this for boards with 2MB flash (like some Ai-Thinker ESP32-C3-12F models)
|
|
upload_speed = 230400 ;; 460800 ;; 256000 ;; 921600
|
|
|
|
build_unflags = ${common.build_unflags}
|
|
-D USERMOD_DALLASTEMPERATURE ;; disabled because it hangs during usermod setup on -S2 (autodetect broken?)
|
|
-D USE_ALT_DISPLAY ;; four line display seems to have problems with I2C - it hangs during usermod setup
|
|
-D USERMOD_FOUR_LINE_DISPLAY ;; see above
|
|
-D USERMOD_ROTARY_ENCODER_UI ;; see above
|
|
-D WLED_ENABLE_DMX ;; disabled because it does not work with ESP-IDF 4.4.x (buggy driver in SparkFunDMX)
|
|
-D WLED_ENABLE_DMX_INPUT ;; needs more testing
|
|
;-D WLED_DEBUG_HOST='"192.168.x.x"' ;; to disable net print
|
|
-D USERMOD_ANIMARTRIX ;; Tips our memory usage over the limit
|
|
-DWLEDMM_FASTPATH ;; needs more testing on -C3
|
|
|
|
build_flags = ${common.build_flags} ${esp32c3.build_flags}
|
|
; -D WLED_DISABLE_OTA ;; OTA is not possible for boards with 2MB flash only (like some Ai-Thinker ESP32-C3-12F models)
|
|
-D WLED_WATCHDOG_TIMEOUT=0 -D CONFIG_ASYNC_TCP_USE_WDT=0
|
|
${common_mm.build_flags_S} ${common_mm.build_flags_M}
|
|
-Wno-misleading-indentation -Wno-format-truncation
|
|
-D WLED_RELEASE_NAME=esp32c3dev_4MB_M
|
|
; -D WLED_DISABLE_BROWNOUT_DET
|
|
; -DARDUINO_USB_CDC_ON_BOOT=1 ;; enable CDC USB -> needed for debugging over serial USB
|
|
-D WLED_DISABLE_ADALIGHT ;; to disable serial protocols for boards with CDC USB (Serial RX will receive junk commands, unless its pulled down by resistor)
|
|
-DARDUINO_USB_CDC_ON_BOOT=0 ;; disable CDC USB
|
|
-D SERVERNAME='"WLED-C3"'
|
|
-D WLEDMM_WIFI_POWERON_HACK -DLOLIN_WIFI_FIX ;; use this _only_ if your device is not able to make a WiFI connection!
|
|
;-D WLED_DISABLE_INFRARED ;; save flash space
|
|
;-D WLED_DISABLE_ALEXA ;; save flash space
|
|
-D LEDPIN=8 ;; onboard neopixel 5x5 Matrix. Attach your own LEDs to GPIO 20
|
|
-D BTNPIN=9
|
|
; -D STATUSLED=10 ;; onboard LED
|
|
-D RLYPIN=-1 -D IRPIN=-1
|
|
;-D HW_PIN_SDA=0 -D HW_PIN_SCL=1 ;; for I2C Qwiic connector
|
|
-D SR_DMTYPE=1 -D I2S_SDPIN=5 -D I2S_WSPIN=6 -D I2S_CKPIN=4 -D MCLK_PIN=7
|
|
; -D WLED_USE_MY_CONFIG
|
|
|
|
lib_deps = ${esp32c3.lib_deps} ${common_mm.lib_deps_S} ${common_mm.lib_deps_V4_M}
|
|
lib_ignore =
|
|
;IRremoteESP8266 ; use with WLED_DISABLE_INFRARED for faster compilation
|
|
OneWire ; not needed as we don't include USERMOD_DALLASTEMPERATURE
|
|
U8g2 ; not needed as we don't include USERMOD_FOUR_LINE_DISPLAY
|
|
; RAM: [== ] 23.7% (used 77780 bytes from 327680 bytes)
|
|
; Flash: [========= ] 93.9% (used 1477456 bytes from 1572864 bytes)
|
|
|
|
;; MM environment for ESP32-C3 "mini" and "super mini" -> flash mode "dio" instead of "qio" (see #101)
|
|
[env:esp32c3mini_dio_4MB_M]
|
|
extends = env:esp32c3dev_4MB_M
|
|
board = lolin_c3_mini
|
|
board_build.flash_mode = dio ;; some super-mini boards are unstable with "qio" mode
|
|
;; board_build.partitions = tools/WLED_ESP32_4MB_256KB_FS.csv ;; optional: 1.8MB firmware, 256KB filesystem (esptool erase_flash needed when changing from "standard WLED" partitions)
|
|
;;; replace WLED_RELEASE_NAME, disable CDC_ON_BOOT
|
|
build_unflags = ${env:esp32c3dev_4MB_M.build_unflags}
|
|
-DARDUINO_USB_CDC_ON_BOOT=1
|
|
-D WLED_RELEASE_NAME=esp32c3dev_4MB_M
|
|
build_flags = ${env:esp32c3dev_4MB_M.build_flags}
|
|
-DARDUINO_USB_CDC_ON_BOOT=0
|
|
-D WLED_RELEASE_NAME=esp32c3mini_dio_4MB_M
|
|
-D WLED_DISABLE_BROWNOUT_DET ;; the board only has a 500mA LDO, better to disable brownout detection
|
|
-D WLED_DISABLE_ADALIGHT ;; to disable serial protocols for boards with CDC USB (Serial RX will receive junk commands, unless its pulled down by resistor)
|
|
-D HW_PIN_SDA=0 -D HW_PIN_SCL=1 ;; avoid pin conflicts
|
|
|
|
;; MM environment for "seeed xiao -C3" boards
|
|
[env:seeed_esp32c3_4MB_S]
|
|
extends = env:esp32c3dev_4MB_M
|
|
board = seeed_xiao_esp32c3
|
|
platform = ${esp32.platformV4_pre} ;; standard IDF 4.4.1 platform - seems to work better for seeed xiao board
|
|
platform_packages = ${esp32.platformV4_packages_pre}
|
|
board_build.flash_mode = qio
|
|
upload_speed = 460800
|
|
build_unflags = ${env:esp32c3dev_4MB_M.build_unflags}
|
|
-DWLEDMM_FASTPATH ;; needs more testing on -C3
|
|
build_flags = ${common.build_flags} ${esp32c3.build_flags}
|
|
-D WLED_WATCHDOG_TIMEOUT=0 -D CONFIG_ASYNC_TCP_USE_WDT=0
|
|
${common_mm.build_flags_S} -Wno-misleading-indentation -Wno-format-truncation
|
|
-D WLED_RELEASE_NAME=seeed_esp32c3_4MB_S
|
|
-DARDUINO_USB_CDC_ON_BOOT=1 ;; enable CDC USB -> needed for debugging over serial USB
|
|
-D WLED_DISABLE_ADALIGHT ;; to disable serial protocols when using CDC USB (Serial RX pin will receive junk commands, unless its pulled down by resistor)
|
|
-D WLED_DISABLE_INFRARED ;; save flash space
|
|
;-D WLED_DISABLE_ALEXA ;; save flash space
|
|
;-D WLED_DISABLE_HUESYNC ;; save flash space
|
|
;-D WLED_DISABLE_LOXONE ;; save flash space
|
|
;-D WLEDMM_WIFI_POWERON_HACK -DLOLIN_WIFI_FIX ;; use this _only_ if your device is not able to make a WiFI connection!
|
|
-D LEDPIN=3 ;; attach your LEDs to GPIO3 aka "D1" / "A1"
|
|
-D BTNPIN=9
|
|
-D RLYPIN=-1 -D IRPIN=-1
|
|
-D SR_DMTYPE=1
|
|
-D I2S_SDPIN=5 -D I2S_WSPIN=6 -D I2S_CKPIN=4 -D MCLK_PIN=7
|
|
-D WLED_USE_MY_CONFIG
|
|
;-D WLED_DEBUG -D SR_DEBUG
|
|
lib_deps = ${esp32c3.lib_deps} ${common_mm.lib_deps_S}
|
|
;lib_ignore = IRremoteESP8266 ; use with WLED_DISABLE_INFRARED for faster compilation
|
|
monitor_filters = esp32_exception_decoder
|
|
; RAM: [== ] 23.8% (used 77908 bytes from 327680 bytes)
|
|
; Flash: [========= ] 90.9% (used 1429302 bytes from 1572864 bytes)
|
|
|
|
|
|
# ------------------------------------------------------------------------------
|
|
# custom board environments
|
|
# ------------------------------------------------------------------------------
|
|
|
|
;https://www.tindie.com/products/serg74/wled-shield-board-for-addressable-leds/
|
|
;https://www.tindie.com/products/moonmodules/shield-board-for-esp32-for-wled-addressable-leds/
|
|
[wemos_shield_esp32_4MB_S_base]
|
|
extends = esp32_4MB_S_base
|
|
build_flags = ${esp32_4MB_S_base.build_flags}
|
|
-D ABL_MILLIAMPS_DEFAULT=9500 ; Wemos max 10A
|
|
-D LEDPIN=16
|
|
-D RLYPIN=19
|
|
-D BTNPIN=17
|
|
-D IRPIN=18
|
|
-D AUDIOPIN=-1
|
|
-D TEMPERATURE_PIN=23
|
|
-D FLD_PIN_SCL=-1 -D FLD_PIN_SDA=-1 ; use global!
|
|
-D HW_PIN_SCL=22 -D HW_PIN_SDA=21
|
|
-D HW_PIN_CLOCKSPI=-1 -D HW_PIN_MOSISPI=-1 -D HW_PIN_MISOSPI=-1 ; WLEDMM: is now also default but just to show we didn't agree on wemos pins for spi yet
|
|
-D ENCODER_DT_PIN=35 -D ENCODER_CLK_PIN=39 -D ENCODER_SW_PIN=5 ; WLEDMM spec by @SERG74: use 35 and 39 instead of 18 and 19 (conflicts)
|
|
-D PIR_SENSOR_PIN=-1
|
|
-D PWM_PIN=-1
|
|
; -D WLED_USE_MY_CONFIG
|
|
|
|
[wemos_shield_esp32_4MB_M_base]
|
|
extends = wemos_shield_esp32_4MB_S_base
|
|
build_flags = ${wemos_shield_esp32_4MB_S_base.build_flags} ${common_mm.build_flags_M}
|
|
lib_deps = ${wemos_shield_esp32_4MB_S_base.lib_deps} ${common_mm.lib_deps_M}
|
|
|
|
[wemos_shield_esp32_4MB_XL_base]
|
|
extends = wemos_shield_esp32_4MB_M_base
|
|
build_flags = ${wemos_shield_esp32_4MB_M_base.build_flags} ${common_mm.build_flags_XL}
|
|
lib_deps = ${wemos_shield_esp32_4MB_M_base.lib_deps} ${common_mm.lib_deps_XL}
|
|
|
|
[env:wemos_shield_esp32_4MB_S]
|
|
extends = wemos_shield_esp32_4MB_S_base
|
|
build_flags = ${wemos_shield_esp32_4MB_S_base.build_flags}
|
|
-D WLED_RELEASE_NAME=wemos_shield_esp32_4MB_S
|
|
|
|
[env:wemos_shield_esp32_4MB_M]
|
|
extends = wemos_shield_esp32_4MB_M_base
|
|
build_flags = ${wemos_shield_esp32_4MB_M_base.build_flags}
|
|
-D WLED_RELEASE_NAME=wemos_shield_esp32_4MB_M
|
|
; RAM: [== ] 24.4% (used 79820 bytes from 327680 bytes)
|
|
; Flash: [========= ] 88.6% (used 1393421 bytes from 1572864 bytes)
|
|
|
|
[env:wemos_shield_esp32_4MB_ICS4343x_M]
|
|
extends = wemos_shield_esp32_4MB_M_base
|
|
build_flags = ${wemos_shield_esp32_4MB_M_base.build_flags} ${Shield_ICS4343x.build_flags}
|
|
-D WLED_RELEASE_NAME=wemos_shield_esp32_4MB_ICS4343x_M
|
|
; RAM: [== ] 24.4% (used 79820 bytes from 327680 bytes)
|
|
; Flash: [========= ] 88.6% (used 1393421 bytes from 1572864 bytes)
|
|
|
|
[env:wemos_shield_esp32_4MB_SPM1423_M]
|
|
extends = wemos_shield_esp32_4MB_M_base
|
|
build_flags = ${wemos_shield_esp32_4MB_M_base.build_flags} ${Shield_SPM1423.build_flags}
|
|
-D WLED_RELEASE_NAME=wemos_shield_esp32_4MB_SPM1423_M
|
|
; RAM: [== ] 24.4% (used 79820 bytes from 327680 bytes)
|
|
; Flash: [========= ] 88.6% (used 1393421 bytes from 1572864 bytes)
|
|
|
|
[env:wemos_shield_esp32_4MB_LineIn_M]
|
|
extends = wemos_shield_esp32_4MB_M_base
|
|
build_unflags = ${common.build_unflags} ${Shield_LineIn.build_unflags}
|
|
build_flags = ${wemos_shield_esp32_4MB_M_base.build_flags} ${Shield_LineIn.build_flags}
|
|
-D WLED_RELEASE_NAME=wemos_shield_esp32_4MB_LineIn_M
|
|
|
|
[env:wemos_shield_esp32_16MB_S]
|
|
extends = wemos_shield_esp32_4MB_S_base
|
|
build_flags = ${wemos_shield_esp32_4MB_S_base.build_flags}
|
|
-D WLED_RELEASE_NAME=wemos_shield_esp32_16MB_S
|
|
board = esp32_16MB
|
|
board_build.partitions = tools/WLED_ESP32_16MB.csv ;; WLED standard for 16MB flash: 2MB firmware, 12 MB filesystem
|
|
|
|
[env:wemos_shield_esp32_16MB_M]
|
|
extends = wemos_shield_esp32_4MB_M_base
|
|
build_flags = ${wemos_shield_esp32_4MB_M_base.build_flags}
|
|
-D WLED_RELEASE_NAME=wemos_shield_esp32_16MB_M
|
|
board = esp32_16MB
|
|
board_build.partitions = tools/WLED_ESP32_16MB.csv ;; WLED standard for 16MB flash: 2MB firmware, 12 MB filesystem
|
|
;board_build.partitions = tools/WLED_ESP32_16MB_9MB_FS.csv ;; WLED extended for 16MB flash: 3.2MB firmware, 9 MB filesystem
|
|
;board_build.flash_mode = qio
|
|
; RAM: [== ] 24.4% (used 79820 bytes from 327680 bytes)
|
|
; Flash: [======= ] 66.4% (used 1393421 bytes from 2097152 bytes)
|
|
|
|
[env:wemos_shield_esp32_16MB_ICS4343x_M]
|
|
extends = wemos_shield_esp32_4MB_M_base
|
|
build_flags = ${wemos_shield_esp32_4MB_M_base.build_flags} ${Shield_ICS4343x.build_flags}
|
|
-D WLED_RELEASE_NAME=wemos_shield_esp32_16MB_ICS4343x_M
|
|
board = esp32_16MB
|
|
board_build.partitions = tools/WLED_ESP32_16MB.csv
|
|
; RAM: [== ] 24.4% (used 79820 bytes from 327680 bytes)
|
|
; Flash: [========= ] 88.6% (used 1393421 bytes from 1572864 bytes)
|
|
|
|
[env:wemos_shield_esp32_16MB_ICS4343x_XL]
|
|
extends = wemos_shield_esp32_4MB_XL_base
|
|
build_flags = ${wemos_shield_esp32_4MB_XL_base.build_flags} ${Shield_ICS4343x.build_flags}
|
|
-D WLED_RELEASE_NAME=wemos_shield_esp32_16MB_ICS4343x_XL
|
|
board = esp32_16MB
|
|
board_build.partitions = tools/WLED_ESP32_16MB.csv ;; WLED standard for 16MB flash: 2MB firmware, 12 MB filesystem
|
|
;board_build.partitions = tools/WLED_ESP32_16MB_9MB_FS.csv ;; WLED extended for 16MB flash: 3.2MB firmware, 9 MB filesystem
|
|
; RAM: [== ] 24.4% (used 80044 bytes from 327680 bytes)
|
|
; Flash: [======= ] 67.9% (used 1424185 bytes from 2097152 bytes)
|
|
|
|
[env:wemos_shield_esp32_16MB_SPM1423_M]
|
|
extends = wemos_shield_esp32_4MB_M_base
|
|
build_flags = ${wemos_shield_esp32_4MB_M_base.build_flags} ${Shield_SPM1423.build_flags}
|
|
-D WLED_RELEASE_NAME=wemos_shield_esp32_16MB_SPM1423_M
|
|
board = esp32_16MB
|
|
board_build.partitions = tools/WLED_ESP32_16MB.csv ;; WLED standard for 16MB flash: 2MB firmware, 12 MB filesystem
|
|
;board_build.partitions = tools/WLED_ESP32_16MB_9MB_FS.csv ;; WLED extended for 16MB flash: 3.2MB firmware, 9 MB filesystem
|
|
; RAM: [== ] 24.4% (used 79820 bytes from 327680 bytes)
|
|
; Flash: [========= ] 88.6% (used 1393421 bytes from 1572864 bytes)
|
|
|
|
[env:wemos_shield_esp32_16MB_SPM1423_XL]
|
|
extends = wemos_shield_esp32_4MB_XL_base
|
|
build_flags = ${wemos_shield_esp32_4MB_XL_base.build_flags} ${Shield_SPM1423.build_flags}
|
|
-D WLED_RELEASE_NAME=wemos_shield_esp32_16MB_SPM1423_XL
|
|
board = esp32_16MB
|
|
board_build.partitions = tools/WLED_ESP32_16MB.csv ;; WLED standard for 16MB flash: 2MB firmware, 12 MB filesystem
|
|
;board_build.partitions = tools/WLED_ESP32_16MB_9MB_FS.csv ;; WLED extended for 16MB flash: 3.2MB firmware, 9 MB filesystem
|
|
; RAM: [== ] 24.4% (used 79820 bytes from 327680 bytes)
|
|
; Flash: [========= ] 88.6% (used 1393421 bytes from 1572864 bytes)
|
|
|
|
[env:wemos_shield_esp32_16MB_LineIn_M]
|
|
extends = wemos_shield_esp32_4MB_M_base
|
|
build_unflags = ${common.build_unflags} ${Shield_LineIn.build_unflags}
|
|
build_flags = ${wemos_shield_esp32_4MB_M_base.build_flags} ${Shield_LineIn.build_flags}
|
|
-D WLED_RELEASE_NAME=wemos_shield_esp32_16MB_LineIn_M
|
|
board = esp32_16MB
|
|
board_build.partitions = tools/WLED_ESP32_16MB.csv ;; WLED standard for 16MB flash: 2MB firmware, 12 MB filesystem
|
|
;board_build.partitions = tools/WLED_ESP32_16MB_9MB_FS.csv ;; WLED extended for 16MB flash: 3.2MB firmware, 9 MB filesystem
|
|
|
|
;https://www.athom.tech/blank-1/wled-esp32-music-addressable-led-strip-controller
|
|
[env:athom_music_esp32_4MB_M]
|
|
extends = esp32_4MB_M_base
|
|
build_flags = ${esp32_4MB_M_base.build_flags} ${Athom_PDMmic.build_flags}
|
|
-D WLED_AP_SSID_UNIQUE
|
|
-D WLED_RELEASE_NAME=athom_music_esp32_4MB_M
|
|
-D ABL_MILLIAMPS_DEFAULT=14500 ; max 15A
|
|
-D WLED_DISABLE_MQTT -D WLED_DISABLE_LOXONE
|
|
-D WLED_DISABLE_ADALIGHT ;to get 4ld working
|
|
-D BTNPIN=0 -D RLYPIN=2 -D IRPIN=25 -D IRTYPE=9 -D LEDPIN=18 -D
|
|
-D AUDIOPIN=-1
|
|
; -D TEMPERATURE_PIN=23
|
|
-D FLD_PIN_SCL=-1 -D FLD_PIN_SDA=-1 ; use global!
|
|
-D HW_PIN_SCL=3 -D HW_PIN_SDA=1 ;4ld uses rx and tx
|
|
-D HW_PIN_CLOCKSPI=-1 -D HW_PIN_MOSISPI=-1 -D HW_PIN_MISOSPI=-1 ; WLEDMM: is now also default but just to show we didn't agree on wemos pins for spi yet
|
|
; -D ENCODER_DT_PIN=35 -D ENCODER_CLK_PIN=39 -D ENCODER_SW_PIN=5 ; WLEDMM spec by @SERG74: use 35 and 39 instead of 18 and 19 (conflicts)
|
|
; -D PIR_SENSOR_PIN=-1
|
|
; -D PWM_PIN=-1
|
|
; -D WLED_USE_MY_CONFIG
|
|
|
|
;https://shop.myhome-control.de/Elektronik/
|
|
[env:abc_wled_controller_v43_S]
|
|
extends = esp32_4MB_S_base
|
|
build_unflags = ${esp32_4MB_S_base.build_unflags} ${common_mm.build_disable_sync_interfaces}
|
|
build_flags = ${esp32_4MB_S_base.build_flags}
|
|
-D WLED_RELEASE_NAME=abc_wled_controller_v43_M
|
|
-D LEDPIN=16
|
|
-D ABL_MILLIAMPS_DEFAULT=5000 ; 5A default. Max 13A depending on the wires connected
|
|
-D WLED_USE_ETHERNET
|
|
-D WLED_ETH_DEFAULT=9 ; ABC! WLED V43 & compatible
|
|
-D RLYPIN=-1 -D BTNPIN=-1 ;; Prevent clash
|
|
-D WLED_DISABLE_ESPNOW ;; ESP-NOW requires wifi, may crash with ethernet only
|
|
-D AUDIOPIN=-1
|
|
-D FLD_PIN_SCL=-1 -D FLD_PIN_SDA=-1 ; use global!
|
|
; -D WLED_USE_MY_CONFIG
|
|
-D SR_DMTYPE=4 -D I2S_SDPIN=32 -D I2S_WSPIN=15 -D I2S_CKPIN=14 -D MCLK_PIN=0 ; generic i2s with mclk 0
|
|
-D SR_SQUELCH=1 -D SR_GAIN=60 ; increrase squelch if noise, in test 0 is okay, but only slightly
|
|
-D SR_FREQ_PROF=1 ; Generic line in
|
|
|
|
; ESP32 WLED pico board with builtin ICS-43432 microphpone
|
|
[env:esp32_pico_4MB_M]
|
|
extends = esp32_4MB_M_base
|
|
board = pico32
|
|
board_build.flash_mode = dout ;; (dout = dual out; more compatible than qio = quad i/o)
|
|
upload_speed = 256000 ;; or 115200 ;; or 460800 ; or 921600 (slower speeds are better when flashing without a soldered connection)
|
|
|
|
build_flags = ${esp32_4MB_M_base.build_flags}
|
|
-D WLED_RELEASE_NAME=esp32_pico_4MB_M
|
|
-D WLED_DISABLE_BROWNOUT_DET
|
|
-D SERVERNAME='"WLED-pico32"'
|
|
; -D WLED_WATCHDOG_TIMEOUT=60
|
|
-D WLED_DISABLE_ADALIGHT ;; WLEDMM this board does not have a serial-to-USB chip. Better to disable serial protocols, to avoid crashes (see upstream #3128)
|
|
; -D WLED_DEBUG
|
|
; -D SR_DEBUG
|
|
-D LEDPIN=2
|
|
-D RLYPIN=19
|
|
-D BTNPIN=0
|
|
-D IRPIN=-1 -D TEMPERATURE_PIN=-1 ;; no default pins for IR, DallasTemp
|
|
-D ENCODER_DT_PIN=-1 -D ENCODER_CLK_PIN=-1 -D ENCODER_SW_PIN=-1 ;; no default pins for Rotary
|
|
-D HW_PIN_SCL=22 -D HW_PIN_SDA=21
|
|
-D SR_DMTYPE=1 -D I2S_SDPIN=25 -D I2S_WSPIN=15 -D I2S_CKPIN=14
|
|
-D SR_SQUELCH=5 -D SR_GAIN=30 -D SR_FREQ_PROF=5 ;; ICS-4343x specific
|
|
; -D MCLK_PIN=0
|
|
-D SR_ENABLE_DEFAULT ;; enable at first start - no need to manually set "enable", then reboot
|
|
; -D WLED_USE_MY_CONFIG
|
|
; -D WLED_DISABLE_LOXONE
|
|
; -D WLED_DISABLE_ALEXA
|
|
; -D WLED_DISABLE_HUESYNC
|
|
; -D WLED_DISABLE_MQTT
|
|
; -D WLED_DISABLE_INFRARED
|
|
; -D WLED_ENABLE_DMX
|
|
; RAM: [== ] 24.4% (used 79812 bytes from 327680 bytes)
|
|
; Flash: [========= ] 90.4% (used 1422581 bytes from 1572864 bytes)
|
|
|
|
|
|
;; experimental
|
|
;; PICO environment with ESP-IDF v4.4.1 / arduino-esp32 v2.0.4
|
|
[env:esp32_pico_4MB_V4_S]
|
|
extends = esp32_4MB_V4_S_base
|
|
board = pico32
|
|
;platform = espressif32@~5.2.0 ;; alternative platform, might help in case you experience bootloops due to corrupted flash filesystem
|
|
;platform_packages =
|
|
upload_speed = 256000 ;; or 115200 ;; or 460800 ; or 921600 (slower speeds are better when flashing without a soldered connection)
|
|
|
|
build_flags = ${esp32_4MB_V4_S_base.esp32_build_flags}
|
|
-D ARDUINO_USB_CDC_ON_BOOT=0 ; needed for arduino-esp32 >=2.0.4; avoids errors on startup
|
|
-D WLED_RELEASE_NAME=esp32_pico_4MB_V4_S
|
|
-D WLED_DISABLE_BROWNOUT_DET
|
|
-D SERVERNAME='"WLED-pico32-V4"'
|
|
-D WLED_WATCHDOG_TIMEOUT=0
|
|
; -D WLED_WATCHDOG_TIMEOUT=60
|
|
; -D WLEDMM_FASTPATH ; WLEDMM experimental option. Reduces audio lag (latency), and allows for faster LED framerates. May break compatibility with previous versions.
|
|
-D WLED_DISABLE_ADALIGHT ;; WLEDMM this board does not have a serial-to-USB chip. Better to disable serial protocols, to avoid crashes (see upstream #3128)
|
|
; -D WLED_DISABLE_LOXONE
|
|
; -D WLED_DISABLE_ALEXA
|
|
; -D WLED_DISABLE_HUESYNC
|
|
; -D WLED_DISABLE_MQTT
|
|
; -D WLED_DISABLE_INFRARED
|
|
; -D WLED_DEBUG
|
|
; -D SR_DEBUG
|
|
-D LEDPIN=2
|
|
-D RLYPIN=-1 -D BTNPIN=-1 -D IRPIN=-1
|
|
-D HW_PIN_SCL=22 -D HW_PIN_SDA=21
|
|
-D SR_DMTYPE=1 -D I2S_SDPIN=25 -D I2S_WSPIN=15 -D I2S_CKPIN=14
|
|
-D SR_SQUELCH=5 -D SR_GAIN=30 -D SR_FREQ_PROF=5 ; ICS-4343x specific
|
|
; -D MCLK_PIN=0
|
|
-D SR_ENABLE_DEFAULT ;; enable audioreactive at first start - no need to manually set "enable", then reboot
|
|
; -D WLED_USE_MY_CONFIG
|
|
lib_deps = ${esp32_4MB_V4_S_base.esp32_lib_deps}
|
|
;lib_ignore = IRremoteESP8266 ; use with WLED_DISABLE_INFRARED for faster compilation
|
|
; RAM: [=== ] 25.4% (used 83144 bytes from 327680 bytes)
|
|
; Flash: [==========] 96.4% (used 1516029 bytes from 1572864 bytes)
|
|
;
|