1234 lines
50 KiB
INI
1234 lines
50 KiB
INI
; PlatformIO Project Configuration File
|
|
; Please visit documentation: https://docs.platformio.org/page/projectconf.html
|
|
|
|
[platformio]
|
|
# ------------------------------------------------------------------------------
|
|
# ENVIRONMENTS
|
|
#
|
|
# Please uncomment one of the lines below to select your board(s)
|
|
# (use `platformio_override.ini` when building for your own board; see `platformio_override.ini.sample` for an example)
|
|
# ------------------------------------------------------------------------------
|
|
|
|
# Release / CI binaries
|
|
; default_envs = nodemcuv2, esp8266_2m, esp01_1m_full, esp32dev, esp32_eth, esp32s2_saola, esp32c3, esp32s3dev_8MB
|
|
|
|
# Build everything
|
|
; default_envs = esp32dev, esp8285_4CH_MagicHome, codm-controller-0.6-rev2, codm-controller-0.6, esp32s2_saola, d1_mini_5CH_Shojo_PCB, d1_mini, sp501e, nodemcuv2, esp32_eth, anavi_miracle_controller, esp07, esp01_1m_full, m5atom, h803wf, d1_mini_ota, heltec_wifi_kit_8, esp8285_H801, d1_mini_debug, wemos_shield_esp32, elekstube_ips
|
|
|
|
# Single binaries (uncomment your board)
|
|
; default_envs = elekstube_ips
|
|
; default_envs = nodemcuv2
|
|
; default_envs = esp8266_2m
|
|
; default_envs = esp01_1m_full
|
|
; default_envs = esp07
|
|
; default_envs = d1_mini
|
|
; default_envs = heltec_wifi_kit_8
|
|
; default_envs = h803wf
|
|
; default_envs = d1_mini_debug
|
|
; default_envs = d1_mini_ota
|
|
; default_envs = esp32dev
|
|
; default_envs = esp8285_4CH_MagicHome
|
|
; default_envs = esp8285_H801
|
|
; default_envs = d1_mini_5CH_Shojo_PCB
|
|
; default_envs = m5atom
|
|
; default_envs = esp32_eth
|
|
; default_envs = esp32dev_qio80
|
|
; default_envs = esp32_eth_ota1mapp
|
|
; default_envs = esp32s2_saola
|
|
|
|
; MoonModules entries
|
|
; ===================
|
|
|
|
default_envs =
|
|
esp32_4MB_max ; recommended default
|
|
esp32_4MB_all
|
|
esp32_16MB_max
|
|
esp32_16MB_all
|
|
esp8266_4MB_min
|
|
esp32_4MB_PSRAM_max
|
|
esp32S3_8MB_max
|
|
wemos_shield_esp32_4MB_max
|
|
wemos_shield_esp32_4MB_ICS4343x_max
|
|
wemos_shield_esp32_4MB_SPM1423_max
|
|
wemos_shield_esp32_4MB_LineIn_max
|
|
wemos_shield_esp32_16MB_max
|
|
wemos_shield_esp32_16MB_ICS4343x_max
|
|
wemos_shield_esp32_16MB_SPM1423_max
|
|
wemos_shield_esp32_16MB_SPM1423_all
|
|
wemos_shield_esp32_16MB_LineIn_max
|
|
esp32_pico_4MB_max
|
|
esp32s2_tinyUF2_PSRAM_max
|
|
|
|
|
|
src_dir = ./wled00
|
|
data_dir = ./wled00/data
|
|
build_cache_dir = ~/.buildcache
|
|
extra_configs =
|
|
platformio_override.ini
|
|
|
|
[common]
|
|
# ------------------------------------------------------------------------------
|
|
# PLATFORM:
|
|
# !! DO NOT confuse platformio's ESP8266 development platform with Arduino core for ESP8266
|
|
#
|
|
# arduino core 2.6.3 = platformIO 2.3.2
|
|
# arduino core 2.7.0 = platformIO 2.5.0
|
|
# ------------------------------------------------------------------------------
|
|
arduino_core_2_6_3 = espressif8266@2.3.3
|
|
arduino_core_2_7_4 = espressif8266@2.6.2
|
|
arduino_core_3_0_0 = espressif8266@3.0.0
|
|
arduino_core_3_2_0 = espressif8266@3.2.0
|
|
|
|
# Development platforms
|
|
arduino_core_develop = https://github.com/platformio/platform-espressif8266#develop
|
|
arduino_core_git = https://github.com/platformio/platform-espressif8266#feature/stage
|
|
|
|
# Platform to use for ESP8266
|
|
platform_wled_default = ${common.arduino_core_3_2_0}
|
|
# We use 2.7.4.7 for all, includes PWM flicker fix and Wstring optimization
|
|
platform_packages = tasmota/framework-arduinoespressif8266 @ 3.20704.7
|
|
platformio/toolchain-xtensa @ ~2.40802.200502
|
|
platformio/tool-esptool @ ~1.413.0
|
|
platformio/tool-esptoolpy @ ~1.30000.0
|
|
|
|
# ------------------------------------------------------------------------------
|
|
# FLAGS: DEBUG
|
|
#
|
|
# ------------------------------------------------------------------------------
|
|
debug_flags = -D DEBUG=1 -D WLED_DEBUG -DDEBUG_ESP_WIFI -DDEBUG_ESP_HTTP_CLIENT -DDEBUG_ESP_HTTP_UPDATE -DDEBUG_ESP_HTTP_SERVER -DDEBUG_ESP_UPDATER -DDEBUG_ESP_OTA -DDEBUG_TLS_MEM
|
|
#if needed (for memleaks etc) also add; -DDEBUG_ESP_OOM -include "umm_malloc/umm_malloc_cfg.h"
|
|
#-DDEBUG_ESP_CORE is not working right now
|
|
|
|
# ------------------------------------------------------------------------------
|
|
# FLAGS: ldscript (available ldscripts at https://github.com/esp8266/Arduino/tree/master/tools/sdk/ld)
|
|
# ldscript_2m1m (2048 KB) = 1019 KB sketch, 4 KB eeprom, 1004 KB spiffs, 16 KB reserved
|
|
# ldscript_4m1m (4096 KB) = 1019 KB sketch, 4 KB eeprom, 1002 KB spiffs, 16 KB reserved, 2048 KB empty/ota?
|
|
#
|
|
# Available lwIP variants (macros):
|
|
# -DPIO_FRAMEWORK_ARDUINO_LWIP_HIGHER_BANDWIDTH = v1.4 Higher Bandwidth (default)
|
|
# -DPIO_FRAMEWORK_ARDUINO_LWIP2_LOW_MEMORY = v2 Lower Memory
|
|
# -DPIO_FRAMEWORK_ARDUINO_LWIP2_HIGHER_BANDWIDTH = v2 Higher Bandwidth
|
|
# -DPIO_FRAMEWORK_ARDUINO_LWIP2_HIGHER_BANDWIDTH_LOW_FLASH
|
|
#
|
|
# BearSSL performance:
|
|
# When building with -DSECURE_CLIENT=SECURE_CLIENT_BEARSSL, please add `board_build.f_cpu = 160000000` to the environment configuration
|
|
#
|
|
# BearSSL ciphers:
|
|
# When building on core >= 2.5, you can add the build flag -DBEARSSL_SSL_BASIC in order to build BearSSL with a limited set of ciphers:
|
|
# TLS_RSA_WITH_AES_128_CBC_SHA256 / AES128-SHA256
|
|
# TLS_RSA_WITH_AES_256_CBC_SHA256 / AES256-SHA256
|
|
# TLS_RSA_WITH_AES_128_CBC_SHA / AES128-SHA
|
|
# TLS_RSA_WITH_AES_256_CBC_SHA / AES256-SHA
|
|
# This reduces the OTA size with ~45KB, so it's especially useful on low memory boards (512k/1m).
|
|
# ------------------------------------------------------------------------------
|
|
build_flags =
|
|
-DMQTT_MAX_PACKET_SIZE=1024
|
|
-DSECURE_CLIENT=SECURE_CLIENT_BEARSSL
|
|
-DBEARSSL_SSL_BASIC
|
|
-D CORE_DEBUG_LEVEL=0
|
|
-D NDEBUG
|
|
#build_flags for the IRremoteESP8266 library (enabled decoders have to appear here)
|
|
-D _IR_ENABLE_DEFAULT_=false
|
|
-D DECODE_HASH=true
|
|
-D DECODE_NEC=true
|
|
-D DECODE_SONY=true
|
|
-D DECODE_SAMSUNG=true
|
|
-D DECODE_LG=true
|
|
-D DECODE_RC5=true
|
|
; -Dregister= # remove warnings in C++17 due to use of deprecated register keyword by the FastLED library
|
|
-DWLED_USE_MY_CONFIG
|
|
; -D USERMOD_SENSORSTOMQTT
|
|
#For ADS1115 sensor uncomment following
|
|
; -D USERMOD_ADS1115
|
|
|
|
build_unflags =
|
|
|
|
build_flags_esp8266 = ${common.build_flags} ${esp8266.build_flags}
|
|
build_flags_esp32 = ${common.build_flags} ${esp32.build_flags}
|
|
|
|
ldscript_1m128k = eagle.flash.1m128.ld
|
|
ldscript_2m512k = eagle.flash.2m512.ld
|
|
ldscript_2m1m = eagle.flash.2m1m.ld
|
|
ldscript_4m1m = eagle.flash.4m1m.ld
|
|
|
|
[scripts_defaults]
|
|
extra_scripts =
|
|
pre:pio-scripts/set_version.py
|
|
post:pio-scripts/output_bins.py
|
|
post:pio-scripts/strip-floats.py
|
|
pre:pio-scripts/user_config_copy.py
|
|
|
|
# ------------------------------------------------------------------------------
|
|
# COMMON SETTINGS:
|
|
# ------------------------------------------------------------------------------
|
|
[env]
|
|
framework = arduino
|
|
board_build.flash_mode = dout
|
|
monitor_speed = 115200
|
|
# slow upload speed (comment this out with a ';' when building for development use)
|
|
upload_speed = 115200
|
|
# fast upload speed (remove ';' when building for development use)
|
|
; upload_speed = 921600
|
|
|
|
# ------------------------------------------------------------------------------
|
|
# LIBRARIES: required dependencies
|
|
# Please note that we don't always use the latest version of a library.
|
|
#
|
|
# The following libraries have been included (and some of them changd) in the source:
|
|
# ArduinoJson@5.13.5, Blynk@0.5.4(changed), E131@1.0.0(changed), Time@1.5, Timezone@1.2.1
|
|
# ------------------------------------------------------------------------------
|
|
lib_compat_mode = strict
|
|
lib_deps =
|
|
fastled/FastLED @ 3.5.0
|
|
IRremoteESP8266 @ 2.8.2
|
|
https://github.com/Aircoookie/ESPAsyncWebServer.git @ ~2.0.7
|
|
#For use of the TTGO T-Display ESP32 Module with integrated TFT display uncomment the following line
|
|
#TFT_eSPI
|
|
#For use SSD1306 OLED display uncomment following
|
|
#U8g2@~2.28.8
|
|
#U8g2@~2.32.10
|
|
#For Dallas sensor uncomment following 2 lines
|
|
#OneWire@~2.3.5
|
|
#milesburton/DallasTemperature@^3.9.0
|
|
#For BME280 sensor uncomment following
|
|
#BME280@~3.0.0
|
|
; adafruit/Adafruit BMP280 Library @ 2.1.0
|
|
; adafruit/Adafruit CCS811 Library @ 1.0.4
|
|
; adafruit/Adafruit Si7021 Library @ 1.4.0
|
|
#For ADS1115 sensor uncomment following
|
|
; adafruit/Adafruit BusIO @ 1.13.2
|
|
; adafruit/Adafruit ADS1X15 @ 2.4.0
|
|
|
|
extra_scripts = ${scripts_defaults.extra_scripts}
|
|
|
|
[esp8266]
|
|
build_flags =
|
|
-DESP8266
|
|
-DFP_IN_IROM
|
|
;-Wno-deprecated-declarations
|
|
;-Wno-register
|
|
;-Wno-misleading-indentation
|
|
; NONOSDK22x_190703 = 2.2.2-dev(38a443e)
|
|
-DPIO_FRAMEWORK_ARDUINO_ESPRESSIF_SDK22x_190703
|
|
; lwIP 2 - Higher Bandwidth no Features
|
|
; -DPIO_FRAMEWORK_ARDUINO_LWIP2_HIGHER_BANDWIDTH_LOW_FLASH
|
|
; lwIP 1.4 - Higher Bandwidth (Aircoookie has)
|
|
-DPIO_FRAMEWORK_ARDUINO_LWIP_HIGHER_BANDWIDTH
|
|
; VTABLES in Flash
|
|
-DVTABLES_IN_FLASH
|
|
; restrict to minimal mime-types
|
|
-DMIMETYPE_MINIMAL
|
|
|
|
lib_deps =
|
|
${env.lib_deps}
|
|
#https://github.com/lorol/LITTLEFS.git
|
|
ESPAsyncTCP @ 1.2.2
|
|
ESPAsyncUDP
|
|
makuna/NeoPixelBus @ 2.6.9
|
|
|
|
[esp32]
|
|
#platform = https://github.com/tasmota/platform-espressif32/releases/download/v2.0.2.3/platform-espressif32-2.0.2.3.zip
|
|
platform = espressif32@3.5.0
|
|
|
|
platform_packages = framework-arduinoespressif32 @ https://github.com/Aircoookie/arduino-esp32.git#1.0.6.4
|
|
|
|
build_flags = -g
|
|
-DARDUINO_ARCH_ESP32 -DESP32
|
|
#-DCONFIG_LITTLEFS_FOR_IDF_3_2
|
|
-D CONFIG_ASYNC_TCP_USE_WDT=0
|
|
#use LITTLEFS library by lorol in ESP32 core 1.x.x instead of built-in in 2.x.x
|
|
-D LOROL_LITTLEFS
|
|
; -DARDUINO_USB_CDC_ON_BOOT=0 ;; this flag is mandatory for "classic ESP32" when builing with arduino-esp32 >=2.0.3
|
|
|
|
default_partitions = tools/WLED_ESP32_4MB_1MB_FS.csv
|
|
|
|
lib_deps =
|
|
${env.lib_deps}
|
|
; https://github.com/lorol/LITTLEFS.git
|
|
; WLEDMM specific: use patched version of lorol LittleFS
|
|
https://github.com/softhack007/LITTLEFS-threadsafe.git#master
|
|
makuna/NeoPixelBus @ 2.6.9
|
|
https://github.com/pbolduc/AsyncTCP.git @ 1.2.0
|
|
|
|
;; ** For compiling with latest Frameworks (IDF4.4.x and arduino-esp32 v2.0.x) **
|
|
;;; standard platform
|
|
platformV4 = espressif32@ ~5.1.1
|
|
platformV4_packages = platformio/framework-arduinoespressif32@ ~3.20004.0
|
|
;;; tasmota platform
|
|
;platformV4 = https://github.com/tasmota/platform-espressif32/releases/download/v2.0.5.1/platform-espressif32-2.0.5.1.zip
|
|
;platformV4_packages =
|
|
;;; V4.4.x build flags (without LOROL_LITTLEFS)
|
|
build_flagsV4 = -g
|
|
-DARDUINO_ARCH_ESP32 -DESP32
|
|
-DCONFIG_LITTLEFS_FOR_IDF_3_2 -DLFS_THREADSAFE
|
|
-D CONFIG_ASYNC_TCP_USE_WDT=0
|
|
; -DARDUINO_USB_CDC_ON_BOOT=0 ;; mandatory for "classic ESP32" when builing with arduino-esp32 >=2.0.3
|
|
;;; V4.4.x libraries (without LOROL_LITTLEFS; with newer NeoPixelBus)
|
|
lib_depsV4 =
|
|
${env.lib_deps}
|
|
;https://github.com/Makuna/NeoPixelBus.git#master ;; NPB 2.6.9 tends to crash whith IDF V4.4.3 -> use latest NeoPixelBus dev instead
|
|
makuna/NeoPixelBus @ 2.7.1
|
|
https://github.com/pbolduc/AsyncTCP.git @ 1.2.0
|
|
|
|
[esp32s2]
|
|
build_flags = -g
|
|
-DARDUINO_ARCH_ESP32
|
|
-DARDUINO_ARCH_ESP32S2
|
|
-DCONFIG_IDF_TARGET_ESP32S2
|
|
-D CONFIG_ASYNC_TCP_USE_WDT=0
|
|
-DCO
|
|
-DARDUINO_USB_MODE=0 ;; this flag is mandatory for ESP32-S2 !
|
|
;; please make sure that the following flags are properly set (to 0 or 1) by your board.json, or included in your custom platformio_override.ini entry:
|
|
;; ARDUINO_USB_CDC_ON_BOOT, ARDUINO_USB_MSC_ON_BOOT, ARDUINO_USB_DFU_ON_BOOT
|
|
|
|
lib_deps =
|
|
${env.lib_deps}
|
|
makuna/NeoPixelBus @ 2.7.1 ;; WLEDMM - new version is more stable on -S2
|
|
https://github.com/pbolduc/AsyncTCP.git @ 1.2.0
|
|
|
|
[esp32c3]
|
|
build_flags = -g
|
|
-DARDUINO_ARCH_ESP32
|
|
-DARDUINO_ARCH_ESP32C3
|
|
-DCONFIG_IDF_TARGET_ESP32C3
|
|
-D CONFIG_ASYNC_TCP_USE_WDT=0
|
|
-DCO
|
|
-DARDUINO_USB_MODE=1 ;; this flag is mandatory for ESP32-C3
|
|
;; please make sure that the following flags are properly set (to 0 or 1) by your board.json, or included in your custom platformio_override.ini entry:
|
|
;; ARDUINO_USB_CDC_ON_BOOT
|
|
|
|
lib_deps =
|
|
${env.lib_deps}
|
|
makuna/NeoPixelBus @ 2.6.9
|
|
https://github.com/pbolduc/AsyncTCP.git @ 1.2.0
|
|
|
|
[esp32s3]
|
|
;; generic definitions for all ESP32-S3 boards
|
|
build_flags = -g
|
|
-DESP32
|
|
-DARDUINO_ARCH_ESP32
|
|
-DARDUINO_ARCH_ESP32S3
|
|
-DCONFIG_IDF_TARGET_ESP32S3
|
|
-D CONFIG_ASYNC_TCP_USE_WDT=0
|
|
-DCO
|
|
;; please make sure that the following flags are properly set (to 0 or 1) by your board.json, or included in your custom platformio_override.ini entry:
|
|
;; ARDUINO_USB_MODE, ARDUINO_USB_CDC_ON_BOOT, ARDUINO_USB_MSC_ON_BOOT, ARDUINO_USB_DFU_ON_BOOT
|
|
|
|
lib_deps =
|
|
${env.lib_deps}
|
|
;; currently we need the latest NeoPixelBus dev version, because it contains important bugfixes for -S3
|
|
;https://github.com/Makuna/NeoPixelBus.git#master ;; NPB 2.6.9 tends to crash whith IDF V4.4.3 -> use latest NeoPixelBus dev instead
|
|
makuna/NeoPixelBus @ 2.7.1
|
|
https://github.com/pbolduc/AsyncTCP.git @ 1.2.0
|
|
|
|
|
|
# ------------------------------------------------------------------------------
|
|
# WLED BUILDS
|
|
# ------------------------------------------------------------------------------
|
|
|
|
[env:nodemcuv2]
|
|
board = nodemcuv2
|
|
platform = ${common.platform_wled_default}
|
|
platform_packages = ${common.platform_packages}
|
|
board_build.ldscript = ${common.ldscript_4m1m}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP8266 -D WLED_DISABLE_BLYNK #-DWLED_DISABLE_2D
|
|
lib_deps = ${esp8266.lib_deps}
|
|
monitor_filters = esp8266_exception_decoder
|
|
|
|
[env:esp8266_2m]
|
|
board = esp_wroom_02
|
|
platform = ${common.platform_wled_default}
|
|
platform_packages = ${common.platform_packages}
|
|
board_build.ldscript = ${common.ldscript_2m512k}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP02 -D WLED_DISABLE_BLYNK
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
[env:esp01_1m_full]
|
|
board = esp01_1m
|
|
platform = ${common.platform_wled_default}
|
|
platform_packages = ${common.platform_packages}
|
|
board_build.ldscript = ${common.ldscript_1m128k}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP01 -D WLED_DISABLE_OTA -D WLED_DISABLE_BLYNK
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
[env:esp07]
|
|
board = esp07
|
|
platform = ${common.platform_wled_default}
|
|
platform_packages = ${common.platform_packages}
|
|
board_build.ldscript = ${common.ldscript_4m1m}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags_esp8266}
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
[env:d1_mini]
|
|
board = d1_mini
|
|
platform = ${common.platform_wled_default}
|
|
platform_packages = ${common.platform_packages}
|
|
upload_speed = 921600
|
|
board_build.ldscript = ${common.ldscript_4m1m}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags_esp8266}
|
|
lib_deps = ${esp8266.lib_deps}
|
|
monitor_filters = esp8266_exception_decoder
|
|
|
|
[env:heltec_wifi_kit_8]
|
|
board = d1_mini
|
|
platform = ${common.platform_wled_default}
|
|
platform_packages = ${common.platform_packages}
|
|
board_build.ldscript = ${common.ldscript_4m1m}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags_esp8266}
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
[env:h803wf]
|
|
board = d1_mini
|
|
platform = ${common.platform_wled_default}
|
|
platform_packages = ${common.platform_packages}
|
|
board_build.ldscript = ${common.ldscript_4m1m}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags_esp8266} -D LEDPIN=1 -D WLED_DISABLE_INFRARED
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
[env:esp32dev]
|
|
board = esp32dev
|
|
platform = ${esp32.platform}
|
|
platform_packages = ${esp32.platform_packages}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags_esp32} -D WLED_RELEASE_NAME=ESP32 -D WLED_DISABLE_BLYNK #-D WLED_DISABLE_BROWNOUT_DET
|
|
lib_deps = ${esp32.lib_deps}
|
|
monitor_filters = esp32_exception_decoder
|
|
board_build.partitions = ${esp32.default_partitions}
|
|
|
|
[env:esp32dev_qio80]
|
|
board = esp32dev
|
|
platform = ${esp32.platform}
|
|
platform_packages = ${esp32.platform_packages}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags_esp32} -D WLED_RELEASE_NAME=ESP32_qio80 -D WLED_DISABLE_BLYNK #-D WLED_DISABLE_BROWNOUT_DET
|
|
lib_deps = ${esp32.lib_deps}
|
|
monitor_filters = esp32_exception_decoder
|
|
board_build.partitions = ${esp32.default_partitions}
|
|
board_build.f_flash = 80000000L
|
|
board_build.flash_mode = qio
|
|
|
|
[env:esp32_eth]
|
|
board = esp32-poe
|
|
platform = ${esp32.platform}
|
|
platform_packages = ${esp32.platform_packages}
|
|
upload_speed = 921600
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags_esp32} -D WLED_RELEASE_NAME=ESP32_Ethernet -D RLYPIN=-1 -D WLED_USE_ETHERNET -D BTNPIN=-1 -D WLED_DISABLE_BLYNK
|
|
lib_deps = ${esp32.lib_deps}
|
|
board_build.partitions = ${esp32.default_partitions}
|
|
|
|
[env:esp32s2_saola]
|
|
board = esp32-s2-saola-1
|
|
;platform = https://github.com/tasmota/platform-espressif32/releases/download/v2.0.2.2/platform-tasmota-espressif32-2.0.2.zip
|
|
;platform_packages =
|
|
platform = ${esp32.platformV4}
|
|
platform_packages = ${esp32.platformV4_packages}
|
|
board_build.partitions = tools/WLED_ESP32_4MB_1MB_FS.csv
|
|
board_build.flash_mode = qio
|
|
upload_speed = 460800
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags} ${esp32s2.build_flags} #-D WLED_RELEASE_NAME=S2_saola
|
|
lib_deps = ${esp32s2.lib_deps}
|
|
|
|
[env:esp32c3dev] ;WLEDMM, merged with latest change on upstream (renamed from env:esp32c3)
|
|
board = esp32-c3-devkitm-1
|
|
platform = ${esp32.platformV4} ;; standard platform, well-tested on -C3, good compatibility with WLED
|
|
platform_packages = ${esp32.platformV4_packages} ;; use with standard platform
|
|
; platform = espressif32@~5.2.0 ;; alternative platform, might help in case you experience bootloops due to corrupted flash filesystem
|
|
; platform_packages = ;; for alternative platform
|
|
board_build.partitions = tools/WLED_ESP32_4MB_1MB_FS.csv
|
|
build_flags = ${common.build_flags} ${esp32c3.build_flags} -D WLED_RELEASE_NAME=ESP32-C3
|
|
-D WLED_WATCHDOG_TIMEOUT=0
|
|
; -DARDUINO_USB_CDC_ON_BOOT=1 ;; for virtual USB
|
|
-D CONFIG_LITTLEFS_FOR_IDF_3_2 ; WLEDMM
|
|
-D WLED_USE_MY_CONFIG ; WLEDMM
|
|
; -D USERMOD_AUDIOREACTIVE ; WLEDMM
|
|
-D USERMOD_CUSTOMEFFECTS ; WLEDMM
|
|
upload_speed = 460800
|
|
build_unflags = ${common.build_unflags}
|
|
lib_deps = ${esp32c3.lib_deps}
|
|
; https://github.com/blazoncek/arduinoFFT.git
|
|
|
|
[env:esp32s3dev_8MB]
|
|
;; ESP32-S3-DevKitC-1 development board, with 8MB FLASH, no PSRAM (flash_mode: qio)
|
|
board = esp32-s3-devkitc-1
|
|
;platform = espressif32@5.1.1
|
|
;platform_packages = platformio/framework-arduinoespressif32@3.20004.220825
|
|
platform = ${esp32.platformV4}
|
|
platform_packages = ${esp32.platformV4_packages}
|
|
upload_speed = 921600
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags} ${esp32s3.build_flags} -D CONFIG_LITTLEFS_FOR_IDF_3_2 -D WLED_WATCHDOG_TIMEOUT=0 -D ARDUINO_USB_MODE=1 -D ARDUINO_USB_CDC_ON_BOOT=0 -D ARDUINO_USB_MSC_ON_BOOT=0
|
|
-D WLED_RELEASE_NAME=ESP32-S3
|
|
-D WLED_USE_MY_CONFIG
|
|
-D USERMOD_AUDIOREACTIVE
|
|
-D USERMOD_CUSTOMEFFECTS
|
|
lib_deps = ${esp32s3.lib_deps}
|
|
https://github.com/blazoncek/arduinoFFT.git
|
|
board_build.partitions = tools/WLED_ESP32_8MB.csv
|
|
board_build.f_flash = 80000000L
|
|
board_build.flash_mode = qio
|
|
; board_build.flash_mode = dio ;; try this if you have problems at startup
|
|
monitor_filters = esp32_exception_decoder
|
|
|
|
[env:esp32s3dev_8MB_PSRAM]
|
|
;; ESP32-TinyS3 development board, with 8MB FLASH and 8MB PSRAM (memory_type: qio_opi, qio_qspi, or opi_opi)
|
|
;board = um_tinys3 ; -> needs workaround from https://github.com/Aircoookie/WLED/pull/2905#issuecomment-1328049860
|
|
;board = esp32s3box ; -> error: 'esp32_adc2gpio' was not declared in this scope
|
|
board = esp32-s3-devkitc-1 ; -> compiles, but does not support PSRAM
|
|
platform = espressif32 @ ~5.2.0
|
|
platform_packages =
|
|
upload_speed = 921600
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags} ${esp32s3.build_flags}
|
|
-D CONFIG_LITTLEFS_FOR_IDF_3_2 -D WLED_WATCHDOG_TIMEOUT=0
|
|
-D ARDUINO_USB_MODE=1 -D ARDUINO_USB_MSC_ON_BOOT=0 ; -D ARDUINO_USB_CDC_ON_BOOT=0
|
|
; -D WLED_RELEASE_NAME=ESP32-S3_PSRAM
|
|
-D WLED_USE_PSRAM -DBOARD_HAS_PSRAM ; tells WLED that PSRAM shall be used
|
|
lib_deps = ${esp32s3.lib_deps}
|
|
board_build.partitions = tools/WLED_ESP32_8MB.csv
|
|
board_build.f_flash = 80000000L
|
|
board_build.flash_mode = qio
|
|
monitor_filters = esp32_exception_decoder
|
|
|
|
[env:esp8285_4CH_MagicHome]
|
|
board = esp8285
|
|
platform = ${common.platform_wled_default}
|
|
platform_packages = ${common.platform_packages}
|
|
board_build.ldscript = ${common.ldscript_1m128k}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags_esp8266} -D WLED_DISABLE_OTA
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
[env:esp8285_H801]
|
|
board = esp8285
|
|
platform = ${common.platform_wled_default}
|
|
platform_packages = ${common.platform_packages}
|
|
board_build.ldscript = ${common.ldscript_1m128k}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags_esp8266} -D WLED_DISABLE_OTA
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
[env:d1_mini_5CH_Shojo_PCB]
|
|
board = d1_mini
|
|
platform = ${common.platform_wled_default}
|
|
platform_packages = ${common.platform_packages}
|
|
board_build.ldscript = ${common.ldscript_4m1m}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags_esp8266} -D WLED_USE_SHOJO_PCB
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
# ------------------------------------------------------------------------------
|
|
# DEVELOPMENT BOARDS
|
|
# ------------------------------------------------------------------------------
|
|
|
|
[env:d1_mini_debug]
|
|
board = d1_mini
|
|
build_type = debug
|
|
platform = ${common.platform_wled_default}
|
|
platform_packages = ${common.platform_packages}
|
|
board_build.ldscript = ${common.ldscript_4m1m}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags_esp8266} ${common.debug_flags}
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
[env:d1_mini_ota]
|
|
board = d1_mini
|
|
upload_protocol = espota
|
|
# exchange for your WLED IP
|
|
upload_port = "10.10.1.27"
|
|
platform = ${common.platform_wled_default}
|
|
platform_packages = ${common.platform_packages}
|
|
board_build.ldscript = ${common.ldscript_4m1m}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags_esp8266}
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
[env:anavi_miracle_controller]
|
|
board = d1_mini
|
|
platform = ${common.platform_wled_default}
|
|
platform_packages = ${common.platform_packages}
|
|
board_build.ldscript = ${common.ldscript_4m1m}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags_esp8266} -D LEDPIN=12 -D IRPIN=-1 -D RLYPIN=2
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
[env:lolin_s2_mini]
|
|
;platform = espressif32@5.1.1
|
|
platform = ${esp32.platformV4}
|
|
platform_packages = ${esp32.platformV4_packages}
|
|
board = lolin_s2_mini
|
|
board_build.partitions = tools/WLED_ESP32_4MB_1MB_FS.csv
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags} ${esp32s2.build_flags} -D WLED_RELEASE_NAME=LolinS2
|
|
-DBOARD_HAS_PSRAM
|
|
-D ARDUINO_USB_CDC_ON_BOOT
|
|
;-D ARDUINO_USB_CDC_ON_BOOT=0
|
|
-D WLED_USE_PSRAM
|
|
-D WLED_WATCHDOG_TIMEOUT=0
|
|
-D CONFIG_ASYNC_TCP_USE_WDT=0
|
|
-D LEDPIN=16
|
|
-D BTNPIN=18
|
|
-D RLYPIN=9
|
|
-D IRPIN=7
|
|
-D HW_PIN_SCL=35
|
|
-D HW_PIN_SDA=33
|
|
-D HW_PIN_CLOCKSPI=7
|
|
-D HW_PIN_MOSISPI=11 ;WLEDMM renamed from HW_PIN_DATASPI
|
|
-D HW_PIN_MISOSPI=9
|
|
; -D STATUSLED=15
|
|
-D WLED_USE_MY_CONFIG
|
|
-D USERMOD_AUDIOREACTIVE
|
|
-D USERMOD_CUSTOMEFFECTS
|
|
|
|
lib_deps = ${esp32s2.lib_deps}
|
|
https://github.com/blazoncek/arduinoFFT.git
|
|
|
|
# ------------------------------------------------------------------------------
|
|
# MoonModules configs
|
|
# see https://mm.kno.wled.ge/moonmodules/platformio-entries/
|
|
# ------------------------------------------------------------------------------
|
|
|
|
; shared build flags and lib deps for minimum and maximum config
|
|
[common_mm]
|
|
build_flags_min =
|
|
-Wall -Wformat -Woverflow -Wuninitialized -Winit-self -Warray-bounds ; enables more warnings
|
|
-Wno-attributes -Wno-unused-variable -Wno-unused-function -Wno-deprecated-declarations ;disables some stupid warnings
|
|
-D WLED_DISABLE_BLYNK ; BLYNK is only provided for backwards compatibility (no new users accepted)
|
|
;-D WLED_DISABLE_BROWNOUT_DET ; enable if you get "brownout detected" errors at startup
|
|
-D WLED_USE_MY_CONFIG
|
|
; -D WLED_USE_CIE_BRIGHTNESS_TABLE ;; experimental: use different color / brightness lookup table
|
|
-D USERMOD_AUDIOREACTIVE
|
|
-D UM_AUDIOREACTIVE_USE_NEW_FFT ; use latest (upstream) FFTLib, instead of older library modified by blazoncek. Slightly faster, more accurate, needs 2KB RAM extra
|
|
-D USERMOD_CUSTOMEFFECTS ; WLEDMM usermod
|
|
; -D WLED_DEBUG_HOST='"192.168.xxx.xxx"' ;; to send debug messages over network to host 192.168.x.y - FQDN is also possible
|
|
; -D WLED_DEBUG_NET_PORT=1768 ;; port for network debugging. default = 7868
|
|
; -D WLED_DEBUG ; lots of generic debug messages
|
|
; -D SR_DEBUG ; some extra debug messages from audioreactive
|
|
; -D MIC_LOGGER ; for sound input monitoring & debugging (use arduino serial plotter)
|
|
; -D WLED_DISABLE_LOXONE
|
|
; -D WLED_DISABLE_ALEXA
|
|
; -D WLED_DISABLE_HUESYNC
|
|
; -D WLED_DISABLE_MQTT
|
|
; -D WLED_DISABLE_INFRARED
|
|
; -D WLED_ENABLE_DMX
|
|
|
|
lib_deps_min =
|
|
https://github.com/kosme/arduinoFFT#develop @ 1.9.2 ; used for USERMOD_AUDIOREACTIVE
|
|
|
|
build_flags_max =
|
|
-D WLED_MAX_USERMODS=25 ; default only 4-6, also for _all configs takes 25 pointers in memory
|
|
;; -D ARDUINO_USB_CDC_ON_BOOT=0 ; needed for arduino-esp32 >=2.0.4 ewowi to softhack: move to build_flags_min? - We need a different solution
|
|
-D WLED_USE_MY_CONFIG ; include custom my_config.h ewowi to softhack: redundant as also in build_flags_min?
|
|
-D USERMOD_DALLASTEMPERATURE
|
|
-D USE_ALT_DISPLAY ; new versions of USERMOD_FOUR_LINE_DISPLAY and USERMOD_ROTARY_ENCODER_UI
|
|
-D USERMOD_FOUR_LINE_DISPLAY
|
|
-D USERMOD_ROTARY_ENCODER_UI
|
|
-D USERMOD_AUTO_SAVE
|
|
-D USERMOD_WEATHER ; WLEDMM usermod
|
|
-D USERMOD_MPU6050_IMU ; gyro/accelero for USERMOD_GAMES (ONLY WORKS IF USERMOD_FOUR_LINE_DISPLAY NOT INCLUDED - I2C SHARING BUG)
|
|
-D USERMOD_GAMES ; WLEDMM usermod
|
|
-D USERMOD_BATTERY ;; enable Battery usermod
|
|
-D USERMOD_BATTERY_USE_LIPO ;; use new "decharging curve" for LiPo cells
|
|
-D USERMOD_BH1750
|
|
-D USERMOD_ANIMATED_STAIRCASE
|
|
|
|
lib_deps_max =
|
|
OneWire@~2.3.5 ; used for USERMOD_FOUR_LINE_DISPLAY and USERMOD_DALLASTEMPERATURE
|
|
olikraus/U8g2 @ ^2.28.8 ; used for USERMOD_FOUR_LINE_DISPLAY
|
|
ElectronicCats/MPU6050 @ 0.6.0 ; used for USERMOD_MPU6050_IMU
|
|
claws/BH1750 @^1.2.0 ; used for USERMOD_BH1750
|
|
|
|
lib_deps_V4_max =
|
|
paulstoffregen/OneWire@ ^2.3.7 ; used for USERMOD_DALLASTEMPERATURE -> need newer release with bugfixes for -S3; still requires TEMPERATURE_PIN < 46
|
|
olikraus/U8g2@ ^2.34.5 ; used for USERMOD_FOUR_LINE_DISPLAY -> need newer version with bugfixes for arduino-esp32 v2.0.4 (Wire inititialization)
|
|
ElectronicCats/MPU6050 @ 0.6.0 ; used for USERMOD_MPU6050_IMU
|
|
claws/BH1750 @^1.2.0 ; used for USERMOD_BH1750
|
|
|
|
build_flags_all =
|
|
-D USERMOD_RTC ;; experimental
|
|
; -D USERMOD_SENSORSTOMQTT ;; experimental ewpwi causes error: fatal error: Adafruit_Sensor.h: No such file or directory
|
|
-D USERMOD_ANALOG_CLOCK
|
|
-D USERMOD_MULTI_RELAY
|
|
-D USERMOD_PIRSWITCH
|
|
-D USERMOD_PWM_FAN
|
|
-D USERMOD_PING_PONG_CLOCK
|
|
-D USERMOD_BUZZER
|
|
-D USERMOD_SN_PHOTORESISTOR
|
|
-D USERMOD_BME280
|
|
-D USERMOD_DHT
|
|
-D USERMOD_VL53L0X_GESTURES
|
|
|
|
lib_deps_all =
|
|
; adafruit/Adafruit BMP280 Library @ 2.1.0 ;; experimental for usermod USERMOD_SENSORSTOMQTT
|
|
; adafruit/Adafruit CCS811 Library @ 1.0.4 ;; experimental for usermod USERMOD_SENSORSTOMQTT
|
|
; adafruit/Adafruit Si7021 Library @ 1.4.0 ;; experimental for usermod USERMOD_SENSORSTOMQTT
|
|
BME280@~3.0.0 ; for usermod USERMOD_BME280
|
|
https://github.com/alwynallan/DHT_nonblocking ; for usermod USERMOD_DHT
|
|
pololu/VL53L0X @ ^1.3.0 ; for usermod USERMOD_VL53L0X_GESTURES
|
|
|
|
; end of common
|
|
|
|
; base entries (without WLED_RELEASE_NAME)
|
|
|
|
; common defaults for all MM environments
|
|
[esp32_4MB_min_base]
|
|
board = esp32dev
|
|
platform = ${esp32.platform}
|
|
upload_speed = 460800 ; or 921600
|
|
platform_packages = ${esp32.platform_packages}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags_esp32} ${common_mm.build_flags_min}
|
|
lib_deps = ${esp32.lib_deps} ${common_mm.lib_deps_min}
|
|
board_build.partitions = ${esp32.default_partitions}
|
|
board_build.f_flash = 80000000L ; use full 80MHz speed for flash (default = 40Mhz)
|
|
board_build.flash_mode = dio ; (dio = dual i/o; more compatible than qio = quad i/o)
|
|
monitor_filters = esp32_exception_decoder ; used to show crash details
|
|
|
|
;common default for all max environments
|
|
[esp32_4MB_max_base]
|
|
extends = esp32_4MB_min_base
|
|
build_flags = ${esp32_4MB_min_base.build_flags} ${common_mm.build_flags_max}
|
|
lib_deps = ${esp32_4MB_min_base.lib_deps} ${common_mm.lib_deps_max}
|
|
board_build.partitions = ${esp32_4MB_min_base.board_build.partitions}
|
|
; board_build.partitions = tools/WLED_ESP32-wrover_4MB.csv
|
|
|
|
[esp32_4MB_all_base]
|
|
extends = esp32_4MB_min_base
|
|
build_flags = ${esp32_4MB_min_base.build_flags} ${common_mm.build_flags_max} ${common_mm.build_flags_all}
|
|
lib_deps = ${esp32_4MB_min_base.lib_deps} ${common_mm.lib_deps_max} ${common_mm.lib_deps_all}
|
|
board_build.partitions = ${esp32_4MB_min_base.board_build.partitions}
|
|
; board_build.partitions = tools/WLED_ESP32-wrover_4MB.csv
|
|
|
|
;common default for all V4 min environments
|
|
[esp32_4MB_V4_min_base]
|
|
board = esp32dev
|
|
upload_speed = 460800 ; or 921600
|
|
platform = ${esp32.platformV4}
|
|
platform_packages = ${esp32.platformV4_packages}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags} ${esp32.build_flagsV4} ${common_mm.build_flags_min}
|
|
-Wno-misleading-indentation -Wno-format-truncation
|
|
lib_deps = ${esp32.lib_depsV4} ${common_mm.lib_deps_min}
|
|
board_build.partitions = ${esp32.default_partitions}
|
|
board_build.f_flash = 80000000L ; use full 80MHz speed for flash (default = 40Mhz)
|
|
board_build.flash_mode = dio ; (dio = dual i/o; more compatible than qio = quad i/o)
|
|
;lib_ignore = IRremoteESP8266 ; use with WLED_DISABLE_INFRARED for faster compilation
|
|
; monitor_filters = esp32_exception_decoder ; used to show crash details
|
|
|
|
[esp32_4MB_V4_max_base]
|
|
extends = esp32_4MB_V4_min_base
|
|
build_flags = ${esp32_4MB_V4_min_base.build_flags} ${common_mm.build_flags_max}
|
|
lib_deps = ${esp32_4MB_V4_min_base.lib_deps} ${common_mm.lib_deps_max}
|
|
board_build.partitions = ${esp32_4MB_V4_min_base.board_build.partitions}
|
|
;board_build.flash_mode = qio ; (dio = dual i/o; more compatible than qio = quad i/o)
|
|
|
|
[Shield_ICS4343x]
|
|
build_flags =
|
|
-D SR_DMTYPE=1 -D I2S_SDPIN=32 -D I2S_WSPIN=15 -D I2S_CKPIN=14 ; for regular I2S microphone
|
|
-D SR_SQUELCH=10 -D SR_GAIN=30 -D SR_FREQ_PROF=5 ; ICS-43434 specific
|
|
|
|
[Shield_SPM1423]
|
|
build_flags =
|
|
-D SR_DMTYPE=5 -D I2S_SDPIN=32 -D I2S_WSPIN=15 -D I2S_CKPIN=-1 ; for I2S PDM microphone
|
|
-D SR_SQUELCH=3 -D SR_GAIN=75 -D SR_FREQ_PROF=7 ; SPM1423 specific
|
|
|
|
[Shield_LineIn]
|
|
build_flags =
|
|
-D SR_DMTYPE=4 -D MCLK_PIN=0 -D I2S_SDPIN=25 -D I2S_WSPIN=15 -D I2S_CKPIN=14 ; for audio Line-In shield
|
|
-D SR_SQUELCH=2 -D SR_GAIN=40 -D SR_FREQ_PROF=1 ; CS5343 Line-In specific
|
|
|
|
[Board_ESP32_16MB] ; ESP32 with 16MB Flash
|
|
board = esp32_16MB
|
|
board_build.partitions = tools/WLED_ESP32_16MB.csv
|
|
|
|
|
|
; end of base entries
|
|
|
|
|
|
; bin entries (with WLED_RELEASE_NAME)
|
|
|
|
[env:esp32_4MB_min]
|
|
extends = esp32_4MB_min_base
|
|
build_flags = ${esp32_4MB_min_base.build_flags}
|
|
-D WLED_RELEASE_NAME=esp32_4MB_min
|
|
; RAM: [== ] 24.1% (used 78900 bytes from 327680 bytes)
|
|
; Flash: [======== ] 83.7% (used 1315729 bytes from 1572864 bytes)
|
|
|
|
[env:esp32_4MB_max]
|
|
extends = esp32_4MB_max_base
|
|
build_flags = ${esp32_4MB_max_base.build_flags}
|
|
-D WLED_RELEASE_NAME=esp32_4MB_max
|
|
; RAM: [== ] 24.4% (used 79804 bytes from 327680 bytes)
|
|
; Flash: [========= ] 88.7% (used 1394813 bytes from 1572864 bytes)
|
|
|
|
[env:esp32_4MB_all]
|
|
extends = esp32_4MB_all_base
|
|
build_flags = ${esp32_4MB_all_base.build_flags}
|
|
-D WLED_RELEASE_NAME=esp32_4MB_all
|
|
; RAM: [== ] 24.4% (used 79804 bytes from 327680 bytes)
|
|
; Flash: [========= ] 88.7% (used 1394813 bytes from 1572864 bytes)
|
|
|
|
[env:esp32_16MB_max]
|
|
extends = esp32_4MB_max_base
|
|
build_flags = ${esp32_4MB_max_base.build_flags}
|
|
-D WLED_RELEASE_NAME=esp32_16MB_max
|
|
board = ${Board_ESP32_16MB.board}
|
|
board_build.partitions = ${Board_ESP32_16MB.board_build.partitions}
|
|
; RAM: [== ] 24.4% (used 79916 bytes from 327680 bytes)
|
|
; Flash: [======= ] 67.0% (used 1405701 bytes from 2097152 bytes)
|
|
;lib_ignore = IRremoteESP8266 ; use with WLED_DISABLE_INFRARED for faster compilation
|
|
|
|
[env:esp32_16MB_all]
|
|
extends = esp32_4MB_all_base
|
|
build_flags = ${esp32_4MB_all_base.build_flags}
|
|
-D WLED_RELEASE_NAME=esp32_16MB_all
|
|
board = ${Board_ESP32_16MB.board}
|
|
board_build.partitions = ${Board_ESP32_16MB.board_build.partitions}
|
|
; RAM: [== ] 24.4% (used 79916 bytes from 327680 bytes)
|
|
; Flash: [======= ] 67.0% (used 1405701 bytes from 2097152 bytes)
|
|
;lib_ignore = IRremoteESP8266 ; use with WLED_DISABLE_INFRARED for faster compilation
|
|
|
|
[env:esp8266_4MB_min]
|
|
extends = env:d1_mini
|
|
upload_speed = 460800 ;115200
|
|
build_flags = ${common.build_flags_esp8266}
|
|
-D WLED_RELEASE_NAME=esp8266_4MB_min
|
|
; -D WLED_DEBUG
|
|
-D WLED_DISABLE_ALEXA
|
|
-D WLED_DISABLE_BLYNK
|
|
-D WLED_DISABLE_HUESYNC
|
|
; -D WLED_DISABLE_2D
|
|
; -D USERMOD_AUDIOREACTIVE
|
|
; -D USERMOD_CUSTOMEFFECTS ; to be done
|
|
-UWLED_USE_MY_CONFIG
|
|
; monitor_filters = esp8266_exception_decoder
|
|
; RAM: [====== ] 58.7% (used 48056 bytes from 81920 bytes)
|
|
; Flash: [======== ] 75.7% (used 790428 bytes from 1044464 bytes)
|
|
|
|
# ------------------------------------------------------------------------------
|
|
# MoonModules configs for IDF V4.4.x
|
|
# ------------------------------------------------------------------------------
|
|
;; Warning: the build-in LittleFS (arduino-esp32 2.0.x) seems to be "slightly different" from Lorol LittleFS.
|
|
;; When upgrading to the new framework, it might be necessary to first do a chip erase (make sure you have a backup of cfg.json and presets.json)
|
|
|
|
; compiled with ESP-IDF 4.4.1
|
|
[env:esp32_4MB_V4_min]
|
|
extends = esp32_4MB_V4_min_base
|
|
build_flags = ${esp32_4MB_V4_min_base.build_flags}
|
|
-D WLED_RELEASE_NAME=esp32_4MB_V4_min
|
|
-D WLED_WATCHDOG_TIMEOUT=0 #-D WLED_DISABLE_BROWNOUT_DET
|
|
-D ARDUINO_USB_CDC_ON_BOOT=0 ; needed for arduino-esp32 >=2.0.4; avoids errors on startup
|
|
-D WLED_DISABLE_LOXONE
|
|
-D WLED_DISABLE_ALEXA
|
|
-D WLED_DISABLE_HUESYNC
|
|
-D WLED_DISABLE_MQTT
|
|
-D WLED_DISABLE_INFRARED
|
|
; -D WLED_DEBUG
|
|
; -D SR_DEBUG
|
|
; -D MIC_LOGGER
|
|
; RAM: [== ] 24.2% (used 79372 bytes from 327680 bytes)
|
|
; Flash: [========= ] 88.8% (used 1396073 bytes from 1572864 bytes)
|
|
;lib_ignore = IRremoteESP8266 ; use with WLED_DISABLE_INFRARED for faster compilation
|
|
|
|
; compiled with ESP-IDF 4.4.1
|
|
[env:esp32_4MB_V4_max]
|
|
extends = esp32_4MB_V4_max_base
|
|
build_flags = ${esp32_4MB_V4_max_base.build_flags}
|
|
-D WLED_RELEASE_NAME=esp32_4MB_V4_max
|
|
-D WLED_WATCHDOG_TIMEOUT=0 #-D WLED_DISABLE_BROWNOUT_DET
|
|
-D ARDUINO_USB_CDC_ON_BOOT=0 ; needed for arduino-esp32 >=2.0.4; avoids errors on startup
|
|
; RAM: [== ] 24.8% (used 81316 bytes from 327680 bytes)
|
|
; Flash: [==========] 97.2% (used 1528253 bytes from 1572864 bytes)
|
|
-D WLED_DISABLE_LOXONE ; FLASH 1272 bytes
|
|
-D WLED_DISABLE_ALEXA ; RAM 116 bytes; FLASH 13524 bytes
|
|
-D WLED_DISABLE_HUESYNC ;RAM 122 bytes; FLASH 6308 bytes
|
|
; RAM: [== ] 24.7% (used 81076 bytes from 327680 bytes)
|
|
; Flash: [==========] 95.8% (used 1506893 bytes from 1572864 bytes)
|
|
;-D WLED_DISABLE_MQTT ; RAM 216 bytes; FLASH 16496 bytes
|
|
;-D WLED_DISABLE_INFRARED ;RAM 136 bytes; FLASH 24492 bytes
|
|
;lib_ignore = IRremoteESP8266 ; use with WLED_DISABLE_INFRARED for faster compilation
|
|
|
|
; compiled with ESP-IDF 4.4.1
|
|
[env:esp32_16MB_V4_max]
|
|
extends = esp32_4MB_V4_max_base
|
|
build_flags = ${esp32_4MB_V4_max_base.build_flags}
|
|
-D WLED_RELEASE_NAME=esp32_16MB_V4_max
|
|
-D WLED_WATCHDOG_TIMEOUT=0 #-D WLED_DISABLE_BROWNOUT_DET
|
|
-D ARDUINO_USB_CDC_ON_BOOT=0 ; needed for arduino-esp32 >=2.0.4; avoids errors on startup
|
|
board = ${Board_ESP32_16MB.board}
|
|
board_build.partitions = ${Board_ESP32_16MB.board_build.partitions}
|
|
; RAM: [== ] 24.8% (used 81316 bytes from 327680 bytes)
|
|
; Flash: [======= ] 72.9% (used 1528253 bytes from 2097152 bytes)
|
|
|
|
;; experimental environment for boards with PSRAM (needs ESP-IDF 4.4.1).
|
|
[env:esp32_4MB_PSRAM_max]
|
|
extends = esp32_4MB_V4_max_base
|
|
board = lolin_d32_pro
|
|
;board = esp32cam
|
|
build_flags = ${esp32_4MB_V4_max_base.build_flags}
|
|
-D WLED_RELEASE_NAME=esp32_4MB_PSRAM_max
|
|
-D WLED_WATCHDOG_TIMEOUT=0 #-D WLED_DISABLE_BROWNOUT_DET
|
|
-D ARDUINO_USB_CDC_ON_BOOT=0 ; needed for arduino-esp32 >=2.0.4; avoids errors on startup
|
|
-D WLED_USE_PSRAM
|
|
; RAM: [== ] 24.8% (used 81424 bytes from 327680 bytes)
|
|
; Flash: [==========] 99.8% (used 1570457 bytes from 1572864 bytes)
|
|
; 99.8% !!!!
|
|
-D WLED_DISABLE_LOXONE ; FLASH 1272 bytes
|
|
-D WLED_DISABLE_ALEXA ; RAM 116 bytes; FLASH 13524 bytes
|
|
-D WLED_DISABLE_MQTT ; RAM 216 bytes; FLASH 16496 bytes
|
|
-D WLED_DISABLE_HUESYNC ;RAM 122 bytes; FLASH 6308 bytes
|
|
; RAM: [== ] 24.7% (used 80948 bytes from 327680 bytes)
|
|
; Flash: [==========] 97.4% (used 1532485 bytes from 1572864 bytes)
|
|
;-D WLED_DISABLE_INFRARED ;RAM 136 bytes; FLASH 24492 bytes
|
|
; -D WLED_ENABLE_DMX
|
|
; -D WLED_DEBUG
|
|
; -D SR_DEBUG
|
|
; -D MIC_LOGGER
|
|
|
|
[env:esp32S3_8MB_max]
|
|
extends = esp32_4MB_V4_max_base
|
|
board = esp32-s3-devkitc-1
|
|
build_unflags =
|
|
-D USERMOD_DALLASTEMPERATURE ;; disabled because it hangs during usermod setup on -S3 (autodetect broken?)
|
|
-D USE_ALT_DISPLAY ;; four line display seems to have problems with I2C - it hangs during usermod setup
|
|
-D USERMOD_FOUR_LINE_DISPLAY ;; see above
|
|
-D USERMOD_ROTARY_ENCODER_UI ;; see above
|
|
-D WLED_ENABLE_DMX ;; disabled because it does not work with ESP-IDF 4.4.x (buggy driver in SparkFunDMX)
|
|
|
|
build_flags = ${esp32_4MB_V4_max_base.build_flags}
|
|
-D WLED_RELEASE_NAME=esp32S3_8MB_max
|
|
-D ARDUINO_USB_MODE=1 -D ARDUINO_USB_CDC_ON_BOOT=0 -D ARDUINO_USB_MSC_ON_BOOT=0 -D ARDUINO_USB_DFU_ON_BOOT=0
|
|
-D WLED_WATCHDOG_TIMEOUT=0
|
|
; -D U8X8_HAVE_2ND_HW_I2C ;; experimental - tells U8g2 lib that a second HW I2C unit exists
|
|
-D WLED_DISABLE_BLYNK ;; seems that BLYNK does not work on -S3
|
|
-D WLED_DISABLE_LOXONE ; FLASH 1272 bytes
|
|
-D WLED_DISABLE_ALEXA ; RAM 116 bytes; FLASH 13524 bytes
|
|
; -D WLED_DISABLE_MQTT ; RAM 216 bytes; FLASH 16496 bytes
|
|
; -D WLED_DISABLE_HUESYNC ;RAM 122 bytes; FLASH 6308 bytes
|
|
; -D WLED_DISABLE_INFRARED ;RAM 136 bytes; FLASH 24492 bytes
|
|
-D LEDPIN=4
|
|
-D STATUSLED=39
|
|
-D BTNPIN=48
|
|
-D RLYPIN=21
|
|
-D IRPIN=15
|
|
-D HW_PIN_SDA=42 ;; ESP32-S3 default: SDA = 8
|
|
-D HW_PIN_SCL=41 ;; ESP32-S3 default: SCL = 9
|
|
-D AUDIOPIN=-1
|
|
-D SR_DMTYPE=1
|
|
-D I2S_SDPIN=16
|
|
-D I2S_CKPIN=17
|
|
-D I2S_WSPIN=47
|
|
-D MCLK_PIN=40
|
|
-D ES7243_SDAPIN=8
|
|
-D ES7243_SCLPIN=18
|
|
; -D WLED_DEBUG
|
|
; -D SR_DEBUG
|
|
; -D MIC_LOGGER
|
|
lib_deps = ${esp32s3.lib_deps} ${common_mm.lib_deps_min} ${common_mm.lib_deps_V4_max}
|
|
;lib_ignore = IRremoteESP8266 ; use with WLED_DISABLE_INFRARED for faster compilation
|
|
board_build.partitions = tools/WLED_ESP32_8MB.csv
|
|
board_build.flash_mode = qio
|
|
; RAM: [== ] 24.7% (used 80856 bytes from 327680 bytes)
|
|
; Flash: [======= ] 66.9% (used 1403489 bytes from 2097152 bytes)
|
|
|
|
;; MM max for Adafruit QT Py ESP32-S2 -> 4MB flash, PSRAM, and tinyUF2 bootloader
|
|
;; to ewowi - i'll optimize this entry later, as a few things can be inherited for sure. To softhack: sure ;-)
|
|
[env:esp32s2_tinyUF2_PSRAM_max]
|
|
extends = esp32_4MB_V4_min_base
|
|
platform = ${esp32.platformV4}
|
|
platform_packages = ${esp32.platformV4_packages}
|
|
|
|
board = adafruit_qtpy_esp32s2
|
|
board_build.partitions = tools/partitions-4MB-tinyuf2_spiffs.csv ;; this is needed for tinyUF2 bootloader!
|
|
board_build.f_flash = 80000000L
|
|
board_build.flash_mode = qio
|
|
upload_speed = 256000 ;; 921600
|
|
build_unflags = ${common.build_unflags}
|
|
-D USERMOD_DALLASTEMPERATURE ;; disabled because it hangs during usermod setup on -S2 (autodetect broken?)
|
|
-D USE_ALT_DISPLAY ;; four line display seems to have problems with I2C - it hangs during usermod setup
|
|
-D USERMOD_FOUR_LINE_DISPLAY ;; see above
|
|
-D USERMOD_ROTARY_ENCODER_UI ;; see above
|
|
-D WLED_ENABLE_DMX ;; disabled because it does not work with ESP-IDF 4.4.x (buggy driver in SparkFunDMX)
|
|
|
|
build_flags = ${common.build_flags} ${esp32.build_flagsV4} ${esp32s2.build_flags}
|
|
-D WLED_WATCHDOG_TIMEOUT=0 -D CONFIG_ASYNC_TCP_USE_WDT=0
|
|
${common_mm.build_flags_min} ${common_mm.build_flags_max}
|
|
-Wno-misleading-indentation -Wno-format-truncation
|
|
-D WLED_RELEASE_NAME=esp32S2_4MB_UF2_max
|
|
-DARDUINO_USB_CDC_ON_BOOT=1 ;; mandatory, otherwise USB does not work!!
|
|
-DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_USB_DFU_ON_BOOT=0
|
|
-D SERVERNAME='"WLED-S2"'
|
|
-D WLED_USE_PSRAM
|
|
-D WLED_DISABLE_INFRARED ;; save flash space
|
|
-D WLED_DISABLE_ALEXA ;; save flash space
|
|
-D LEDPIN=39 ;; onboard neopixel LED. Attach your own LEDs to GPIO 7 or GPIO 6
|
|
-D BTNPIN=0
|
|
;-D RLYPIN=6
|
|
;-D IRPIN=7
|
|
-D HW_PIN_SCL=40
|
|
-D HW_PIN_SDA=41
|
|
-D HW_PIN_MOSISPI=35 ;WLEDMM renamed from HW_PIN_DATASPI
|
|
-D HW_PIN_CLOCKSPI=36
|
|
-D HW_PIN_MISOSPI=37
|
|
-D AUDIOPIN=-1
|
|
-D SR_DMTYPE=1
|
|
-D I2S_SDPIN=9
|
|
-D I2S_WSPIN=8
|
|
-D I2S_CKPIN=17
|
|
-D MCLK_PIN=18
|
|
;-D STATUSLED=-1
|
|
-D WLED_USE_MY_CONFIG
|
|
; -D WLED_DEBUG_HOST='"192.168.xxx.xxx"' ;; to send debug messages over network to host 192.168.x.y - FQDN is also possible
|
|
; -D WLED_DEBUG_NET_PORT=1768 ;; port for network debugging. default = 7868
|
|
; -D WLED_DEBUG
|
|
; -D SR_DEBUG
|
|
; -D MIC_LOGGER
|
|
lib_deps = ${env.lib_deps} ${esp32s2.lib_deps} ${common_mm.lib_deps_min} ${common_mm.lib_deps_V4_max}
|
|
lib_ignore = IRremoteESP8266 ; use with WLED_DISABLE_INFRARED for faster compilation
|
|
monitor_filters = esp32_exception_decoder
|
|
; RAM: [=== ] 25.6% (used 83796 bytes from 327680 bytes)
|
|
; Flash: [==========] 97.7% (used 1408626 bytes from 1441792 bytes)
|
|
|
|
# ------------------------------------------------------------------------------
|
|
# custom board configurations
|
|
# ------------------------------------------------------------------------------
|
|
|
|
[wemos_shield_esp32_4MB_max_base]
|
|
extends = esp32_4MB_max_base
|
|
build_flags = ${esp32_4MB_max_base.build_flags}
|
|
-D ABL_MILLIAMPS_DEFAULT=9500 ; Wemos max 10A
|
|
-D LEDPIN=16
|
|
-D RLYPIN=19
|
|
-D BTNPIN=17
|
|
-D IRPIN=18
|
|
-D AUDIOPIN=-1
|
|
-D TEMPERATURE_PIN=23
|
|
-D FLD_PIN_SCL=-1 -D FLD_PIN_SDA=-1 ; use global!
|
|
-D HW_PIN_SCL=22 -D HW_PIN_SDA=21
|
|
-D ENCODER_DT_PIN=35 -D ENCODER_CLK_PIN=5 -D ENCODER_SW_PIN=39 ;WLEDMM spec by @SERG74: use 35 and 39 instead of 18 and 19 (conflicts)
|
|
; -D WLED_USE_MY_CONFIG
|
|
|
|
[wemos_shield_esp32_4MB_all_base]
|
|
extends = esp32_4MB_all_base
|
|
build_flags = ${esp32_4MB_all_base.build_flags}
|
|
-D ABL_MILLIAMPS_DEFAULT=9500 ; Wemos max 10A
|
|
-D LEDPIN=16
|
|
-D RLYPIN=19
|
|
-D BTNPIN=17
|
|
-D IRPIN=18
|
|
-D AUDIOPIN=-1
|
|
-D TEMPERATURE_PIN=23
|
|
-D FLD_PIN_SCL=-1 -D FLD_PIN_SDA=-1 ; use global!
|
|
-D HW_PIN_SCL=22 -D HW_PIN_SDA=21
|
|
-D ENCODER_DT_PIN=35 -D ENCODER_CLK_PIN=5 -D ENCODER_SW_PIN=39 ;WLEDMM spec by @SERG74: use 35 and 39 instead of 18 and 19 (conflicts)
|
|
; -D WLED_USE_MY_CONFIG
|
|
|
|
[env:wemos_shield_esp32_4MB_max]
|
|
extends = wemos_shield_esp32_4MB_max_base
|
|
build_flags = ${wemos_shield_esp32_4MB_max_base.build_flags}
|
|
-D WLED_RELEASE_NAME=wemos_shield_esp32_4MB_max
|
|
; RAM: [== ] 24.4% (used 79820 bytes from 327680 bytes)
|
|
; Flash: [========= ] 88.6% (used 1393421 bytes from 1572864 bytes)
|
|
|
|
[env:wemos_shield_esp32_4MB_ICS4343x_max]
|
|
extends = wemos_shield_esp32_4MB_max_base
|
|
build_flags = ${wemos_shield_esp32_4MB_max_base.build_flags} ${Shield_ICS4343x.build_flags}
|
|
-D WLED_RELEASE_NAME=wemos_shield_esp32_4MB_ICS4343x_max
|
|
; RAM: [== ] 24.4% (used 79820 bytes from 327680 bytes)
|
|
; Flash: [========= ] 88.6% (used 1393421 bytes from 1572864 bytes)
|
|
|
|
[env:wemos_shield_esp32_4MB_SPM1423_max]
|
|
extends = wemos_shield_esp32_4MB_max_base
|
|
build_flags = ${wemos_shield_esp32_4MB_max_base.build_flags} ${Shield_SPM1423.build_flags}
|
|
-D WLED_RELEASE_NAME=wemos_shield_esp32_4MB_SPM1423_max
|
|
; RAM: [== ] 24.4% (used 79820 bytes from 327680 bytes)
|
|
; Flash: [========= ] 88.6% (used 1393421 bytes from 1572864 bytes)
|
|
|
|
[env:wemos_shield_esp32_4MB_LineIn_max]
|
|
extends = wemos_shield_esp32_4MB_max_base
|
|
build_flags = ${wemos_shield_esp32_4MB_max_base.build_flags} ${Shield_LineIn.build_flags}
|
|
-D WLED_RELEASE_NAME=wemos_shield_esp32_4MB_LineIn_max
|
|
|
|
[env:wemos_shield_esp32_16MB_max]
|
|
extends = wemos_shield_esp32_4MB_max_base
|
|
build_flags = ${wemos_shield_esp32_4MB_max_base.build_flags}
|
|
-D WLED_RELEASE_NAME=wemos_shield_esp32_16MB_max
|
|
board = ${Board_ESP32_16MB.board}
|
|
board_build.partitions = ${Board_ESP32_16MB.board_build.partitions}
|
|
; RAM: [== ] 24.4% (used 79820 bytes from 327680 bytes)
|
|
; Flash: [======= ] 66.4% (used 1393421 bytes from 2097152 bytes)
|
|
|
|
[env:wemos_shield_esp32_16MB_ICS4343x_max]
|
|
extends = wemos_shield_esp32_4MB_max_base
|
|
build_flags = ${wemos_shield_esp32_4MB_max_base.build_flags} ${Shield_ICS4343x.build_flags}
|
|
-D WLED_RELEASE_NAME=wemos_shield_esp32_16MB_ICS4343x_max
|
|
board = ${Board_ESP32_16MB.board}
|
|
board_build.partitions = ${Board_ESP32_16MB.board_build.partitions}
|
|
; RAM: [== ] 24.4% (used 79820 bytes from 327680 bytes)
|
|
; Flash: [========= ] 88.6% (used 1393421 bytes from 1572864 bytes)
|
|
|
|
[env:wemos_shield_esp32_16MB_SPM1423_max]
|
|
extends = wemos_shield_esp32_4MB_max_base
|
|
build_flags = ${wemos_shield_esp32_4MB_max_base.build_flags} ${Shield_SPM1423.build_flags}
|
|
-D WLED_RELEASE_NAME=wemos_shield_esp32_16MB_SPM1423_max
|
|
board = ${Board_ESP32_16MB.board}
|
|
board_build.partitions = ${Board_ESP32_16MB.board_build.partitions}
|
|
; RAM: [== ] 24.4% (used 79820 bytes from 327680 bytes)
|
|
; Flash: [========= ] 88.6% (used 1393421 bytes from 1572864 bytes)
|
|
monitor_filters = esp32_exception_decoder ; used to show crash details
|
|
|
|
[env:wemos_shield_esp32_16MB_SPM1423_all]
|
|
extends = wemos_shield_esp32_4MB_all_base
|
|
build_flags = ${wemos_shield_esp32_4MB_all_base.build_flags} ${Shield_SPM1423.build_flags}
|
|
-D WLED_RELEASE_NAME=wemos_shield_esp32_16MB_SPM1423_all
|
|
board = ${Board_ESP32_16MB.board}
|
|
board_build.partitions = ${Board_ESP32_16MB.board_build.partitions}
|
|
; RAM: [== ] 24.4% (used 79820 bytes from 327680 bytes)
|
|
; Flash: [========= ] 88.6% (used 1393421 bytes from 1572864 bytes)
|
|
monitor_filters = esp32_exception_decoder ; used to show crash details
|
|
|
|
[env:wemos_shield_esp32_16MB_LineIn_max]
|
|
extends = wemos_shield_esp32_4MB_max_base
|
|
build_flags = ${wemos_shield_esp32_4MB_max_base.build_flags} ${Shield_LineIn.build_flags}
|
|
-D WLED_RELEASE_NAME=wemos_shield_esp32_16MB_LineIn_max
|
|
board = ${Board_ESP32_16MB.board}
|
|
board_build.partitions = ${Board_ESP32_16MB.board_build.partitions}
|
|
|
|
; ESP32 WLED pico board with builtin ICS-43432 microphpone
|
|
[env:esp32_pico_4MB_max]
|
|
extends = esp32_4MB_max_base
|
|
board = pico32
|
|
build_flags = ${esp32_4MB_max_base.build_flags}
|
|
-D WLED_RELEASE_NAME=esp32_pico_4MB_max
|
|
-D WLED_DISABLE_BROWNOUT_DET
|
|
-D SERVERNAME='"WLED-pico32"'
|
|
; -D WLED_WATCHDOG_TIMEOUT=60
|
|
; -D WLED_DEBUG
|
|
; -D SR_DEBUG
|
|
-D LEDPIN=2
|
|
-D RLYPIN=-1
|
|
-D BTNPIN=-1
|
|
-D IRPIN=-1
|
|
-D HW_PIN_SCL=22 -D HW_PIN_SDA=21
|
|
-D SR_DMTYPE=1 -D I2S_SDPIN=25 -D I2S_WSPIN=15 -D I2S_CKPIN=14
|
|
-D SR_SQUELCH=5 -D SR_GAIN=30 -D SR_FREQ_PROF=5 ; ICS-43434 specific
|
|
; -D MCLK_PIN=0
|
|
; -D WLED_USE_MY_CONFIG
|
|
; -D WLED_DISABLE_LOXONE
|
|
; -D WLED_DISABLE_ALEXA
|
|
; -D WLED_DISABLE_HUESYNC
|
|
; -D WLED_DISABLE_MQTT
|
|
; -D WLED_DISABLE_INFRARED
|
|
; -D WLED_ENABLE_DMX
|
|
; RAM: [== ] 24.4% (used 79804 bytes from 327680 bytes)
|
|
; Flash: [========= ] 88.6% (used 1394241 bytes from 1572864 bytes)
|
|
|
|
[env:m5atom]
|
|
board = esp32dev
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags_esp32} -D LEDPIN=27 -D BTNPIN=39
|
|
lib_deps = ${esp32.lib_deps}
|
|
platform = espressif32@3.2
|
|
board_build.partitions = ${esp32.default_partitions}
|
|
|
|
[env:sp501e]
|
|
board = esp_wroom_02
|
|
platform = ${common.platform_wled_default}
|
|
board_build.ldscript = ${common.ldscript_2m512k}
|
|
build_flags = ${common.build_flags_esp8266} -D LEDPIN=3 -D BTNPIN=1
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
[env:sp511e]
|
|
board = esp_wroom_02
|
|
platform = ${common.platform_wled_default}
|
|
board_build.ldscript = ${common.ldscript_2m512k}
|
|
build_flags = ${common.build_flags_esp8266} -D LEDPIN=3 -D BTNPIN=2 -D IRPIN=5 -D WLED_MAX_BUTTONS=3
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
[env:athom7w]
|
|
board = esp_wroom_02
|
|
platform = ${common.platform_wled_default}
|
|
board_build.ldscript = ${common.ldscript_2m512k}
|
|
build_flags = ${common.build_flags_esp8266} -D WLED_MAX_CCT_BLEND=0 -D BTNPIN=-1 -D IRPIN=-1 -D WLED_DISABLE_INFRARED
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
[env:athom15w]
|
|
board = esp_wroom_02
|
|
platform = ${common.platform_wled_default}
|
|
board_build.ldscript = ${common.ldscript_2m512k}
|
|
build_flags = ${common.build_flags_esp8266} -D WLED_USE_IC_CCT -D BTNPIN=-1 -D IRPIN=-1 -D WLED_DISABLE_INFRARED
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
[env:MY9291]
|
|
board = esp01_1m
|
|
platform = ${common.platform_wled_default}
|
|
platform_packages = ${common.platform_packages}
|
|
board_build.ldscript = ${common.ldscript_1m128k}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP01 -D WLED_DISABLE_OTA -D USERMOD_MY9291
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
# ------------------------------------------------------------------------------
|
|
# codm pixel controller board configurations
|
|
# codm-controller-0.6 can also be used for the TYWE3S controller
|
|
# ------------------------------------------------------------------------------
|
|
|
|
[env:codm-controller-0.6]
|
|
board = esp_wroom_02
|
|
platform = ${common.platform_wled_default}
|
|
platform_packages = ${common.platform_packages}
|
|
board_build.ldscript = ${common.ldscript_2m512k}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags_esp8266}
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
[env:codm-controller-0.6-rev2]
|
|
board = esp_wroom_02
|
|
platform = ${common.platform_wled_default}
|
|
platform_packages = ${common.platform_packages}
|
|
board_build.ldscript = ${common.ldscript_4m1m}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags_esp8266}
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
# ------------------------------------------------------------------------------
|
|
# EleksTube-IPS
|
|
# ------------------------------------------------------------------------------
|
|
[env:elekstube_ips]
|
|
board = esp32dev
|
|
platform = espressif32@3.2
|
|
upload_speed = 921600
|
|
build_flags = ${common.build_flags_esp32} -D WLED_DISABLE_BROWNOUT_DET -D WLED_DISABLE_INFRARED
|
|
-D USERMOD_RTC
|
|
-D USERMOD_ELEKSTUBE_IPS
|
|
-D LEDPIN=12
|
|
-D RLYPIN=27
|
|
-D BTNPIN=34
|
|
-D WLED_DISABLE_BLYNK
|
|
-D DEFAULT_LED_COUNT=6
|
|
# Display config
|
|
-D ST7789_DRIVER
|
|
-D TFT_WIDTH=135
|
|
-D TFT_HEIGHT=240
|
|
-D CGRAM_OFFSET
|
|
-D TFT_SDA_READ
|
|
-D TFT_MOSI=23
|
|
-D TFT_SCLK=18
|
|
-D TFT_DC=25
|
|
-D TFT_RST=26
|
|
-D SPI_FREQUENCY=40000000
|
|
-D USER_SETUP_LOADED
|
|
monitor_filters = esp32_exception_decoder
|
|
lib_deps =
|
|
${esp32.lib_deps}
|
|
TFT_eSPI @ ^2.3.70
|
|
board_build.partitions = ${esp32.default_partitions}
|