Jan/WLED_MM_Infinity
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity
6,458 Commits 1 Branch 0 Tags
a001bd18921bb3c0a7c4444a01473208bd6f14aa
Commit Graph

4550 Commits

Author SHA1 Message Date
Troy
a001bd1892 Merge branch 'MoonModules:mdev' into mdev 2026-02-05 16:46:56 -05:00
Frank Möhle
71893cf00d Merge pull request #301 from MoonModules/copilot/fix-hub75-output-list 
Fix Hub75 options wrongly appearing in dynamically added LED outputs
 2026-02-05 11:44:39 +01:00
Frank
b7d81e7fca bugfix for wrongly disabled PINs 
Skips pin arrays for special bus types where pin array doesn't contain GPIO numbers, but allows all other entries
 2026-02-05 00:07:22 +01:00
Frank
d591ff8ab8 variable renamed for clarity 
isFirstHub =>  isFirstPin
 2026-02-04 23:01:15 +01:00
Frank
6ecb872070 initialize new pin arrays 2026-02-04 22:55:19 +01:00
Frank
53c396ecb1 styling 
move "Ax" label slightly to the right, "DMX " doesn't need extra space
 2026-02-04 22:42:43 +01:00
Frank
fd079d6105 add HUB75 and DMX pins to usermods pin dropdown 
these pins were wrongly shown as "available", because the are not stored in the cfg.json part related to LEDs settings.
 2026-02-04 22:19:42 +01:00
Frank
7fd23932e4 (minor) fix for apChannel reset to 1 instead of 6 
spotted by @dedehai in https://github.com/wled/WLED/pull/5332
 2026-02-03 17:14:54 +01:00
Frank
dea91bc2ab spots effect bugfix 
* use named constants for fixed point scaling
* remove buggy "SEGLEN / (zones >>3)" shortcut
* align code with upstream
 2026-02-03 10:33:52 +01:00
Frank
a47bbfe05b spots effect improvements 
* use native 32bit types (similar to upstream)
* avoids gaps on left/right side of strip, by using higher accuracy for zoneLength
* prevent overflow on "s"
* fix wrongly named slider in "spots fade"
 2026-02-02 23:06:03 +01:00
Frank
b17819e2ce better trails for PS Fireworks 2026-01-30 12:47:13 +01:00
Troy
ce0a55670d Not from my PR but I'll fix it for the rabbit. 2026-01-29 14:12:21 -05:00
Troy
05147002cd The rabbit said I was being too careful. Tested and works. 2026-01-29 13:57:17 -05:00
Troy
ff93a85fa6 Always allow serial console on S3/C3/C6/etc 2026-01-29 13:40:55 -05:00
Frank
1d686d7807 leds 2D preview: better color accuracy 
* replace "jumpy" color enhancement with a smooth function
* slightly increase size of preview pixels
 2026-01-29 13:49:53 +01:00
Frank
1210881bd8 reduce risk of crashes (stack smashing) due calls to notify() 
The function uses a UDP buffer of ~1200 bytes on stack, which is only needed when actually sending out notifications.
-> separate activation checks and actual sending into two functions, to reduce stack pressure.
 2026-01-29 13:00:53 +01:00
Frank
c945732c8d Update NodeStruct.h 
sync with upstream
 2026-01-28 23:57:23 +01:00
Frank Möhle
f4237b6505 new ESP32 node types 
Added new node types for unsupported ESP32 variants, based on same file from ESP Easy.

Just to be prepared for new nodes (future support)
 2026-01-28 23:55:07 +01:00
Frank
b691cdee56 build 2601281 2026-01-28 23:05:06 +01:00
Frank
e8a3383c2e esp-now WizMote data description update 
based on same file from upstream
 2026-01-28 23:03:10 +01:00
Damian Schneider
afcd48f7ac adding image rotation to PixelForge gif tool (#5309) 2026-01-28 22:39:02 +01:00
Frank
bbe8e6eb0f remove static functions (Philips HUE) 
fixes the build error
 2026-01-28 22:17:25 +01:00
Frank
4b47714f68 Philips hue robustness improvements 
* reduce JSON buffer from 1024 to 640
* ESP32: define buffer globally (reduces likelyhood of crashes due to low stack)
* added some sanity checks after string ops
* delete hueClient object after closing the connection

* make functions static if not used outside of hue.cpp, re-shuffle order where needed
* rename JSON buffer object: root -> jsonHUEroot
 2026-01-28 22:12:24 +01:00
Frank
de0f5c89fc stateUpdated robustness improvements 
* acquire segmentMux before applying changes
* avoid temporary segment copy (copy can lead to new buffer allocations)
 2026-01-28 20:32:42 +01:00
Frank Möhle
d29402d64f quickfix for sporadic "relay does not turn on" issues 
see discussion in https://github.com/wled/WLED/issues/5312
 2026-01-26 13:54:32 +01:00
Frank
57d63b7362 ESPDMX robustness improvements 
* clamp channel to dmxMaxChannel (write)
* ensure that all data get sent, including start byte
 2026-01-25 17:45:08 +01:00
Frank Möhle
0718a6d265 comment clarification 
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
 2026-01-25 17:30:03 +01:00
Frank Möhle
e6e2348483 protect start byte 
If Channel is less than 0, it's clamped to 0 on line 134. Then on line 138, dmxData[0] is written with the value, overwriting the start byte that was just set on line 137. DMX Channel numbers should be 1-based (1-512). The bounds check should clamp Channel to a minimum of 1, not 0, to prevent corrupting the start byte

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
 2026-01-25 17:29:10 +01:00
Frank
3150f3b448 use correct DMXSerial object on -S2 and -C3 2026-01-25 17:12:04 +01:00
Frank
8faa88e05b chanSize expansion must account for start byte 2026-01-25 17:02:06 +01:00
Frank
f0753d6cf6 robustness improvement 
bounds check before changing global variables
 2026-01-25 16:18:30 +01:00
Frank
2628e9167d fix max number of bytes to be sent 2026-01-25 16:15:24 +01:00
Frank
82f713093e indentation 2026-01-25 15:46:57 +01:00
Frank
279d48a3d1 (minor) clarify compile-time messages for DMX drivers 2026-01-25 15:44:40 +01:00
Frank
fb738883fa safeguards against array bounds violation 2026-01-25 15:43:53 +01:00
Frank
900178cd70 only build DMX drivers when WLED_ENABLE_DMX 
both ESPDMX and SparkFunDMX have their own global buffers. Conditional compile prevents that these buffers are consuming RAM when not needed.
 2026-01-25 15:08:40 +01:00
Frank
6ad6acfe08 align DMX output drivers with upstream 
imports a few DMX serial output improvement from upstream
 2026-01-25 15:06:27 +01:00
Frank
88acb54241 some more attributes 
for better optimization by the compiler
 2026-01-17 14:08:11 +01:00
Frank
6aea3b5a77 align 2D particleFX with upstream 
minor improvements from upstream
 2026-01-17 13:58:04 +01:00
Frank
d987206d3b make wled_math functions IRAM_ATTR (faster) 2026-01-17 13:56:29 +01:00
Frank
1f065f69c2 post-merge 
* replace all remaining sqrt16() with sqrt32_bw()
* align particleGalaxy effects with upstream
 2026-01-17 13:21:02 +01:00
netmindz
729f623953 Merge pull request #4558 from DedeHai/wifi_hardware_timing_fix 
Bugfix for incorrect wifi-hardware timing
 2026-01-17 12:19:17 +01:00
Damian Schneider
532c9b762c replacement for fastled sqrt16() (#4426) 
* added bitwise operation based sqrt16

- replacement for fastled, it is about 10% slower for numbers smaller 128 but faster for larger numbers. speed difference is irrelevant to WLED but it saves some flash.

* updated to 32bit, improved for typical WLED use

- making it 32bits allows for larger numbers
- added another initial condition check for medium sized numbers
- increased the "small number" optimization to larger numbers: the function is currently only used to calculate sqrt(x^2+y^2) which even for small segments is larger than the initially used 64, so optimizing for 1024 makes more sense, although the value is arbitrarily chosen
 2026-01-17 12:18:35 +01:00
netmindz
bf4aae8e60 Merge pull request #4682 from DedeHai/PS_galaxy 
Add new effect: PS Galaxy
 2026-01-17 11:52:46 +01:00
netmindz
2b543f2199 Merge pull request #4577 from DevJogger/main 
Add apple-touch-icon Link Tag
 2026-01-17 11:43:52 +01:00
Damian Schneider
3259b3acb0 Bugfix for brightness factor upon save: fixes #4824 (#4827) 2026-01-17 11:17:07 +01:00
Frank Möhle
caa8cba38e Merge pull request #317 from MoonModules/copilot/update-nightly-build-version 
Automate nightly build VERSION from build date, update Changelog generator to v2.4
 2026-01-15 20:34:09 +01:00
Frank
0fb07b9d07 (hotfix) DMX-output rate limiting to prevent watchdog reset 
this is a quick workaround for custom builds with WLED_ENABLE_DMX. it adds rate limiting to the dmx-output handler function.

still waiting for a good solution from upstream
* https://github.com/wled/WLED/pull/5216
* https://github.com/wled/WLED/pull/5287
 2026-01-15 12:39:26 +01:00
Frank Möhle
5cfca1b340 fix indentation 
minor
 2026-01-15 11:38:55 +01:00
Frank Möhle
5a8d45b6d3 use WLED_BUILD_VERSION for override by CI actions 
avoids potential name clashes with used libraries
 2026-01-15 11:23:57 +01:00