* It was not possible any more to set I2C pins back to "-1", to disable I2C.
This fixes the problem.
* HW_PIN_SDA / HW_PIN_SCL may contain "-1" --> use PIN numbers directly on 8266 (I2C pins cannot be changed any way on 8266)
- show VBAT pin (if board definitely has that feature)
- some WROVER board have cross-connection between GPIO 25/27 and PIN 16/17
- experimental support for boards that have NEOPIXEL_I2C_POWER
got myself an adafruit "qt py -S2" with tinyUF2 bootloader. So I wanted to get that working. And it does work :-).
FFT time = 10ms (instead of 2ms on classic ESP32) is a very good result, also virtual USB runs much better now.
- new partition table for boards with UF2 boot (Adafruit qt py S2)
- better treatment of debug out using "USBCDC" native port
- workarounds for watchdog crashes on -S2
- Add missing but mandatory build flags for -S2 and -C3
wled.h:
- Don't use Serial directly -S2 as S2 serial driver is buggy.
- added USER_FLUSH macro
wled.cpp
- replace fluh with FLUSH
- print ArduionoOTA info (if enabled)
wled_server.cpp:
- added userlog info after file upload.
pinn_manager:
- don't show "(default)" is the PIN is actually assigned to HW drivers
- bugfix for getPinOwner()
- add WLED_NUM_PINS constant, to get rid of magic number "50"
- only show I2S defaults when USERMOD_AUDIOREACTIVE is enabled
- added alternate names for SPI pins
- small correction for -C3
* set.cpp: reject non-ADC pins as analog button pins (bugfix)
* pinmanager:
record conflicts
added getOwnerText(PinOwner tag) and getPinConflicts(int gpio)
GPIO | Assigned to | Info
--------|-----------------------|------------
i/o 0 Button !! Conflict with AudioReactive (UM) !! (default) I2S MCLK
i/o 1 debug output Serial TX
i/o 2 ./. (default) LED pin
i/o 3 ./. Serial RX
i/o 5 ./. (default) SPI SS
i/o 13 Button !! Conflict with IR Receiver !!
PIN ALLOC error: GPIO19 for analog button #2 is not an analog pin!
Improvements for debugging GPIO conflicts. HTML UI integration still pending.
* pinManager can be asked for pin owner (String) and pin special purpose (string).
* wled.cpp: show GPIO allocation when compiling with WLED_DEBUG
* pinmanager: show Pin Owner as name when possible.
The results looks like this
GPIO | Assigned to | Info
--------|-----------------------|------------
i/o 0 Button
i/o 1 debug Serial TX
i/o 2 DMX out
i/o 3 ./. Serial RX
i/o 5 ./. SPI SS
i/o 15 AudioReactive (UM)
i/o 16 LEDs (digital)
i/o 17 Relay
i/o 18 ./. SPI CLK
i/o 19 IR Receiver SPI MISO
i/o 21 I2C I2C SDA
i/o 22 I2C I2C SCL
i/o 23 ./. SPI MOSI
i/o 32 AudioReactive (UM)
* Improved pin manager, ethernet config
* Ethernet is configured prior even to LED pins
* Pin Manager allocation / deallocation functions
now take an "ownership" tag parameter, helping
avoid accidentally free'ing pins that were allocated
by other code
* Pin Manager now has ability to allocate multiple
pins at once; Simplifies error handling
* Fix operator precedence error
Bitwise AND has lower precedence than the
relational "greater than" operator.
* PinManager update for some user modules
* don't build everything...
* Final step to reduce RAM overhead
* update comment
* remove macros
* Remove leftover allocated
* Init ethernet after settings saved
Co-authored-by: Christian Schwinne <dev.aircoookie@gmail.com>
