Jan/WLED_MM_Infinity
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity

Implement conditional ARDUINO_USB_MODE: dev=1, release=0

Browse Source 
Co-authored-by: netmindz <442066+netmindz@users.noreply.github.com>
This commit is contained in:
copilot-swe-agent[bot]
2025-09-20 12:06:19 +00:00
parent bb10ec3b75
commit e094d60552
2 changed files with 84 additions and 10 deletions
Download Patch File Download Diff File Expand all files Collapse all files

21
platformio.ini
View File

@@ -220,6 +220,7 @@ ldscript_16m14m = eagle.flash.16m14m.ld
extra_scripts =
pre:pio-scripts/set_version.py
pre:pio-scripts/build-html.py
pre:pio-scripts/conditional_usb_mode.py
post:pio-scripts/output_bins.py
post:pio-scripts/strip-floats.py
pre:pio-scripts/user_config_copy.py
@@ -455,7 +456,7 @@ build_flags = -g
-D CONFIG_ASYNC_TCP_USE_WDT=0
-D CONFIG_ASYNC_TCP_TASK_STACK_SIZE=9472 ;; WLEDMM increase stack by 1.25Kb, as audioreactive needs bigger SETTINGS_STACK_BUF_SIZE
-DCO
-DARDUINO_USB_MODE=0 ;; changed from 1 to 0 to allow normal boot without USB debugger
-DARDUINO_USB_MODE=1 ;; this flag is mandatory for ESP32-C3
;; please make sure that the following flags are properly set (to 0 or 1) by your board.json, or included in your custom platformio_override.ini entry:
;; ARDUINO_USB_CDC_ON_BOOT
@@ -702,7 +703,7 @@ build_unflags = ${common.build_unflags}
build_flags = ${common.build_flags} ${esp32s3.build_flags}
-D CONFIG_LITTLEFS_FOR_IDF_3_2 -D WLED_WATCHDOG_TIMEOUT=0
;-D ARDUINO_USB_CDC_ON_BOOT=0 ;; -D ARDUINO_USB_MODE=1 ;; for boards with serial-to-USB chip
-D ARDUINO_USB_CDC_ON_BOOT=1 -D ARDUINO_USB_MODE=0 ;; changed from 1 to 0 to allow normal boot without USB debugger
-D ARDUINO_USB_CDC_ON_BOOT=1 -D ARDUINO_USB_MODE=1 ;; for boards with USB-OTG connector only (USBCDC or "TinyUSB")
; -D WLED_RELEASE_NAME=ESP32-S3_PSRAM
-D WLED_USE_PSRAM -DBOARD_HAS_PSRAM ; tells WLED that PSRAM shall be used
-D WLED_USE_PSRAM_JSON -DALL_JSON_TO_PSRAM ; WLEDMM --> force all JSON stuff into PSRAM; gives more free heap
@@ -1907,7 +1908,7 @@ build_flags = ${common.build_flags} ${esp32s3.build_flags} -Wno-misleading-inden
${common_mm.HUB75_build_flags}
${common_mm.animartrix_build_flags}
-D WLED_RELEASE_NAME=esp32S3_4MB_S
-DARDUINO_USB_MODE=0 -DARDUINO_USB_CDC_ON_BOOT=0 -DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_USB_DFU_ON_BOOT=0 ;; changed from 1 to 0 to allow normal boot without USB debugger
-DARDUINO_USB_MODE=1 -DARDUINO_USB_CDC_ON_BOOT=0 -DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_USB_DFU_ON_BOOT=0 ;; for Serial-to-USB chip
;;-DARDUINO_USB_MODE=1 -DARDUINO_USB_CDC_ON_BOOT=1 -DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_USB_DFU_ON_BOOT=1 ;; for Hardware-CDC USB mode
-D WLED_DISABLE_ADALIGHT ;; disables serial protocols - recommended for Hardware-CDC USB (Serial RX will receive junk commands when RX pin is unconnected, unless its pulled down by resistor)
-D WLED_WATCHDOG_TIMEOUT=0 -D CONFIG_ASYNC_TCP_USE_WDT=0
@@ -1938,7 +1939,7 @@ build_flags = ${common.build_flags} ${esp32s3.build_flags} -Wno-misleading-inden
; -DBOARD_HAS_PSRAM -D WLED_USE_PSRAM_JSON -D WLED_USE_PSRAM ;; un-comment in case your board supports PSRAM
;; -D WLED_USE_PSRAM_JSON -DALL_JSON_TO_PSRAM ; WLEDMM --> force all JSON stuff into PSRAM; gives more free heap
-D WLED_RELEASE_NAME=esp32S3_8MB_M
-DARDUINO_USB_MODE=0 -DARDUINO_USB_CDC_ON_BOOT=0 -DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_USB_DFU_ON_BOOT=0 ;; changed from 1 to 0 to allow normal boot without USB debugger
-DARDUINO_USB_MODE=1 -DARDUINO_USB_CDC_ON_BOOT=0 -DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_USB_DFU_ON_BOOT=0 ;; for Serial-to-USB chip
;;-DARDUINO_USB_MODE=1 -DARDUINO_USB_CDC_ON_BOOT=1 -DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_USB_DFU_ON_BOOT=1 ;; for Hardware-CDC USB mode
;;-D WLED_DISABLE_ADALIGHT ;; disables serial protocols - recommended for Hardware-CDC USB (Serial RX will receive junk commands when RX pin is unconnected, unless its pulled down by resistor)
-D WLED_WATCHDOG_TIMEOUT=0 -D CONFIG_ASYNC_TCP_USE_WDT=0
@@ -1989,7 +1990,7 @@ build_flags = ${common.build_flags} ${esp32s3.build_flags} -Wno-misleading-inden
-DBOARD_HAS_PSRAM ;; -D WLED_USE_PSRAM ;; your board supports PSRAM
-D WLED_USE_PSRAM_JSON -DALL_JSON_TO_PSRAM ; WLEDMM --> force all JSON stuff into PSRAM; gives more free heap
-D WLED_RELEASE_NAME=esp32S3_8MB_PSRAM_M
-DARDUINO_USB_MODE=0 -DARDUINO_USB_CDC_ON_BOOT=0 -DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_USB_DFU_ON_BOOT=0 ;; changed from 1 to 0 to allow normal boot without USB debugger
-DARDUINO_USB_MODE=1 -DARDUINO_USB_CDC_ON_BOOT=0 -DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_USB_DFU_ON_BOOT=0 ;; for Serial-to-USB chip
;;-DARDUINO_USB_MODE=1 -DARDUINO_USB_CDC_ON_BOOT=1 -DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_USB_DFU_ON_BOOT=1 ;; for Hardware-CDC USB mode
;;-D WLED_DISABLE_ADALIGHT ;; disables serial protocols - recommended for Hardware-CDC USB (Serial RX will receive junk commands when RX pin is unconnected, unless its pulled down by resistor)
-D WLED_WATCHDOG_TIMEOUT=0 -D CONFIG_ASYNC_TCP_USE_WDT=0
@@ -2027,7 +2028,7 @@ build_unflags = ${env:esp32S3_8MB_M.build_unflags} ;; use the same as "normal"
build_flags = ${common.build_flags} ${esp32s3.build_flags} -Wno-misleading-indentation -Wno-format-truncation
${common_mm.build_flags_S}
-D WLED_RELEASE_NAME=esp32S3_8MB_S
-DARDUINO_USB_MODE=0 -DARDUINO_USB_CDC_ON_BOOT=0 -DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_USB_DFU_ON_BOOT=0 ;; changed from 1 to 0 to allow normal boot without USB debugger
-DARDUINO_USB_MODE=1 -DARDUINO_USB_CDC_ON_BOOT=0 -DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_USB_DFU_ON_BOOT=0 ;; for Serial-to-USB chip
;;-DARDUINO_USB_MODE=1 -DARDUINO_USB_CDC_ON_BOOT=1 -DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_USB_DFU_ON_BOOT=1 ;; for Hardware-CDC USB mode
;;-D WLED_DISABLE_ADALIGHT ;; disables serial protocols - recommended for Hardware-CDC USB (Serial RX will receive junk commands when RX pin is unconnected, unless its pulled down by resistor)
${Speed_Flags.build_flags_V4} ;; optimize for speed instead of size
@@ -2090,7 +2091,7 @@ build_flags = ${common.build_flags} ${esp32s3.build_flags} -Wno-misleading-inden
-D MAX_SEGMENT_DATA=40960 ;; default 32767
-DBOARD_HAS_PSRAM ;; -D WLED_USE_PSRAM ;; your board supports PSRAM
-D WLED_USE_PSRAM_JSON -DALL_JSON_TO_PSRAM ; WLEDMM --> force all JSON stuff into PSRAM; gives more free heap
-DARDUINO_USB_MODE=0 -DARDUINO_USB_CDC_ON_BOOT=0 -DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_USB_DFU_ON_BOOT=0 ;; changed from 1 to 0 to allow normal boot without USB debugger
-DARDUINO_USB_MODE=1 -DARDUINO_USB_CDC_ON_BOOT=0 -DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_USB_DFU_ON_BOOT=0 ;; for Serial-to-USB chip
;; -DARDUINO_USB_MODE=1 -DARDUINO_USB_CDC_ON_BOOT=1 -DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_USB_DFU_ON_BOOT=1 ;; for Hardware-CDC USB mode
-D WLED_WATCHDOG_TIMEOUT=0 -D CONFIG_ASYNC_TCP_USE_WDT=0
;; -DUSERMOD_BATTERY_MEASUREMENT_PIN=2 ;; battery voltage pin
@@ -2134,7 +2135,7 @@ build_flags = ${common.build_flags} ${esp32s3.build_flags} -Wno-misleading-inden
-D WLEDMM_FASTPATH
-DBOARD_HAS_PSRAM ;; -D WLED_USE_PSRAM ;; your board supports PSRAM
-D WLED_USE_PSRAM_JSON -DALL_JSON_TO_PSRAM ; WLEDMM --> force all JSON stuff into PSRAM; gives more free heap
-DARDUINO_USB_MODE=0 -DARDUINO_USB_CDC_ON_BOOT=0 -DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_USB_DFU_ON_BOOT=0 ;; changed from 1 to 0 to allow normal boot without USB debugger
-DARDUINO_USB_MODE=1 -DARDUINO_USB_CDC_ON_BOOT=0 -DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_USB_DFU_ON_BOOT=0 ;; for Serial-to-USB chip
;;-DARDUINO_USB_MODE=1 -DARDUINO_USB_CDC_ON_BOOT=1 -DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_USB_DFU_ON_BOOT=1 ;; for Hardware-CDC USB mode
-D WLED_WATCHDOG_TIMEOUT=0 -D CONFIG_ASYNC_TCP_USE_WDT=0
;; -D LEDPIN=38 ;; buildin LED
@@ -2160,7 +2161,7 @@ build_flags = ${common.build_flags} ${esp32s3.build_flags} -Wno-misleading-inden
-D WLED_USE_PSRAM_JSON -DALL_JSON_TO_PSRAM ; WLEDMM --> force all JSON stuff into PSRAM; gives more free heap
-DCONFIG_MBEDTLS_DYNAMIC_BUFFER=1 ;; optional - allows some buffers to use PSRAM
-DLOLIN_WIFI_FIX -DWLEDMM_WIFI_POWERON_HACK ;; seems to work much better with this
-DARDUINO_USB_MODE=0 -DARDUINO_USB_CDC_ON_BOOT=0 -DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_USB_DFU_ON_BOOT=1 ;; changed from 1 to 0 to allow normal boot without USB debugger
-DARDUINO_USB_MODE=1 -DARDUINO_USB_CDC_ON_BOOT=0 -DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_USB_DFU_ON_BOOT=1 ;; for Serial-to-USB chip
;;-DARDUINO_USB_MODE=1 -DARDUINO_USB_CDC_ON_BOOT=1 -DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_USB_DFU_ON_BOOT=1 ;; for Hardware-CDC USB mode
-D WLED_DISABLE_ADALIGHT ;; disables serial protocols - recommended for Hardware-CDC USB (Serial RX will receive junk commands when RX pin is unconnected, unless its pulled down by resistor)
${Speed_Flags.build_flags_V4} ;; optimize for speed instead of size
@@ -2205,7 +2206,7 @@ build_flags = ${common.build_flags} ${esp32s3.build_flags} -Wno-misleading-inden
-D WLED_USE_PSRAM_JSON -DALL_JSON_TO_PSRAM ; WLEDMM --> force all JSON stuff into PSRAM; gives more free heap
-DCONFIG_MBEDTLS_DYNAMIC_BUFFER=1 ;; optional - allows some buffers to use PSRAM
-DLOLIN_WIFI_FIX -DWLEDMM_WIFI_POWERON_HACK ;; seems to work much better with this
-DARDUINO_USB_MODE=0 -DARDUINO_USB_CDC_ON_BOOT=0 -DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_USB_DFU_ON_BOOT=1 ;; changed from 1 to 0 to allow normal boot without USB debugger
-DARDUINO_USB_MODE=1 -DARDUINO_USB_CDC_ON_BOOT=0 -DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_USB_DFU_ON_BOOT=1 ;; for Serial-to-USB chip
;;-DARDUINO_USB_MODE=1 -DARDUINO_USB_CDC_ON_BOOT=1 -DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_USB_DFU_ON_BOOT=1 ;; for Hardware-CDC USB mode
-D WLED_DISABLE_ADALIGHT ;; disables serial protocols - recommended for Hardware-CDC USB (Serial RX will receive junk commands when RX pin is unconnected, unless its pulled down by resistor)
;; ${common_mm.animartrix_build_flags} ;; not enough flash