FIX for adafruit portal S3: remove extra flash section & use default WLED partitions (#5113)

* remove extra flash section, rename board file
* matrixportal: change partitions to standard 8MB

plus minor name adjustment (adding "for WLED")

Co-authored-by: Frank <91616163+softhack007@users.noreply.github.com>

boards/adafruit_matrixportal_esp32s3_wled.json

@@ -0,0 +1,58 @@
+{
+  "build": {
+    "arduino":{
+      "ldscript": "esp32s3_out.ld",
+      "partitions": "default_8MB.csv"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DARDUINO_ADAFRUIT_MATRIXPORTAL_ESP32S3",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1",
+      "-DBOARD_HAS_PSRAM"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [
+      [
+        "0x239A",
+        "0x8125"
+      ],
+      [
+        "0x239A",
+        "0x0125"
+      ],
+      [
+        "0x239A",
+        "0x8126"
+      ]
+    ],
+    "mcu": "esp32s3",
+    "variant": "adafruit_matrixportal_esp32s3"
+  },
+  "connectivity": [
+    "bluetooth",
+    "wifi"
+  ],
+  "debug": {
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": [
+    "arduino",
+    "espidf"
+  ],
+  "name": "Adafruit MatrixPortal ESP32-S3 for WLED",
+  "upload": {
+    "flash_size": "8MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 8388608,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 460800
+  },
+  "url": "https://www.adafruit.com/product/5778",
+  "vendor": "Adafruit"
+}

platformio.ini

@@ -110,7 +110,7 @@ default_envs =
   esp01_1MB_S
   ;;
   athom_music_esp32_4MB_M
-  adafruit_matrixportal_esp32s3_tinyUF2  ;;  HUB75 supported, uses adafruit bootloader
+  adafruit_matrixportal_esp32s3  ;;  HUB75 supported, uses adafruit bootloader
   ; adafruit_matrixportal_esp32s3_legacy ;;  try this if the "tinyUF2" firmware doesn't run on your board
 
 ; Go to MoonModules environments for environments
@@ -3011,12 +3011,12 @@ lib_ignore =
 ; RAM:   [===       ]  26.0% (used 85100 bytes from 327680 bytes)
 ; Flash: [========= ]  90.0% (used 1534269 bytes from 1703936 bytes)
 
-[env:adafruit_matrixportal_esp32s3_legacy]
+[env:adafruit_matrixportal_esp32s3_wled]
 ; ESP32-S3 processor, 8 MB flash, 2 MB of PSRAM, dedicated driver pins for HUB75
 extends = esp32_4MB_V4_M_base
 platform = ${esp32.platformV4_xp} ;; 6.5.0 = first platform release supporting matrixportal
 platform_packages = ${esp32.platformV4_packages_xp} ;; arduino-esp32 2.0.14 needed - previous versions were missing files for matrixportal
-board = adafruit_matrixportal_esp32s3
+board = adafruit_matrixportal_esp32s3_wled
 
 board_build.partitions = ${esp32.large_partitions}    ;; default 8MB WLED partitions
 ;; board_build.f_flash = 80000000L ;; this is the default for board = adafruit_matrixportal_esp32s3
@@ -3028,7 +3028,7 @@ build_unflags = ${env:esp32S3_8MB_M.build_unflags}   ;; use the same as "normal"
 build_flags = ${common.build_flags} ${esp32s3.build_flags} -Wno-misleading-indentation -Wno-format-truncation
   ${common_mm.build_flags_S}
   ${Speed_Flags.build_flags_V4}  ;; -O2 -> optimize for speed instead of size
-  -D WLED_RELEASE_NAME=matrixportal_esp32s3_legacy
+  -D WLED_RELEASE_NAME=matrixportal_esp32s3
   -D SERVERNAME='"WLED-MatrixPortalS3"'
   ; Serial debug enabled  -DARDUINO_USB_MODE=1 -DARDUINO_USB_CDC_ON_BOOT=1 -DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_USB_DFU_ON_BOOT=1 ;; for Hardware-CDC USB mode
   -D ARDUINO_USB_CDC_ON_BOOT=0
@@ -3054,14 +3054,12 @@ monitor_filters = esp32_exception_decoder
 
 ;; this buildenv uses the original bootloader and partions from adafruit
 [env:adafruit_matrixportal_esp32s3_tinyUF2]
-extends = env:adafruit_matrixportal_esp32s3_legacy
+extends = env:adafruit_matrixportal_esp32s3_wled
-
 board_build.partitions = tools/partitions-8MB_spiffs-tinyuf2.csv    ;; use original adafruit 8MB tinyUF2 partitioning
-
 ;; we just replace WLED_RELEASE_NAME
-build_unflags = ${env:adafruit_matrixportal_esp32s3_legacy.build_unflags}
+build_unflags = ${env:adafruit_matrixportal_esp32s3_wled.build_unflags}
-  -D WLED_RELEASE_NAME=matrixportal_esp32s3_legacy
+  -D WLED_RELEASE_NAME=matrixportal_esp32s3
-build_flags = ${env:adafruit_matrixportal_esp32s3_legacy.build_flags}
+build_flags = ${env:adafruit_matrixportal_esp32s3_wled.build_flags}
   -D WLED_RELEASE_NAME=matrixportal_esp32s3_tinyUF2
 ; 
 ; RAM:   [==        ]  18.4% (used 60456 bytes from 327680 bytes)
@@ -3069,4 +3067,4 @@ build_flags = ${env:adafruit_matrixportal_esp32s3_legacy.build_flags}
 
 [env:adafruit_matrixportal_esp32s3]
 ;; this buildenv is just an alias for the matrixportal UF2 build, to keep 3rd party build tools happy.
-extends = env:adafruit_matrixportal_esp32s3_tinyUF2
+extends = env:adafruit_matrixportal_esp32s3_wled