code spell checking - part4 (MM specific)

CHANGELOG.md

@@ -733,7 +733,7 @@
 #### Build 2101040
 
 -   Replaced Red & Blue effect with Aurora effect (PR #1589)
--   Fixed HTTP changing segments uncommanded (#1618)
+-   Fixed HTTP changing segments un-commanded (#1618)
 -   Updated copyright year and contributor page link
 
 #### Build 2012311

CONTRIBUTING.md

@@ -14,7 +14,7 @@ You are all set if you have enabled `Editor: Detect Indentation` in VS Code.
 
 #### Blocks
 
-Whether the opening bracket of e.g. an `if` block is in the same line as the condition or in a separate line is up to your discretion. If there is only one statement, leaving out block braches is acceptable.
+Whether the opening bracket of e.g. an `if` block is in the same line as the condition or in a separate line is up to your discretion. If there is only one statement, leaving out block braces is acceptable.
 
 Good:  
 ```cpp

platformio.ini

@@ -332,7 +332,7 @@ build_flagsV4 = -g
   -DCONFIG_LITTLEFS_FOR_IDF_3_2 -DLFS_THREADSAFE
   -D CONFIG_ASYNC_TCP_USE_WDT=0
   -D CONFIG_ASYNC_TCP_TASK_STACK_SIZE=9472              ;; WLEDMM increase stack by 1.25Kb, as audioreactive needs bigger SETTINGS_STACK_BUF_SIZE
-  ; -DARDUINO_USB_CDC_ON_BOOT=0 ;; mandatory for "classic ESP32" when builing with arduino-esp32 >=2.0.3
+  ; -DARDUINO_USB_CDC_ON_BOOT=0 ;; mandatory for "classic ESP32" when building with arduino-esp32 >=2.0.3
 ;;; V4.4.x libraries (without LOROL_LITTLEFS; with newer NeoPixelBus)
 lib_depsV4 =
   https://github.com/pbolduc/AsyncTCP.git @ 1.2.0 ;; WLEDMM this must be first in the list, otherwise Aircoookie/ESPAsyncWebServer pulls in an older version of AsyncTCP !!
@@ -984,7 +984,7 @@ lib_deps_M =
 lib_deps_V4_M =
   ;https://github.com/blazoncek/OneWire.git ; includes bugfixes for inconsistent readings
   paulstoffregen/OneWire@ ^2.3.7 ; used for USERMOD_DALLASTEMPERATURE -> need newer release with bugfixes for -S3; still requires TEMPERATURE_PIN < 46
-  olikraus/U8g2@ ^2.34.5 ; used for USERMOD_FOUR_LINE_DISPLAY -> need newer version with bugfixes for arduino-esp32 v2.0.4 (Wire inititialization) 
+  olikraus/U8g2@ ^2.34.5 ; used for USERMOD_FOUR_LINE_DISPLAY -> need newer version with bugfixes for arduino-esp32 v2.0.4 (Wire initialization) 
   ${common_mm.animartrix_lib_deps}
 
 build_flags_XL = 
@@ -992,7 +992,7 @@ build_flags_XL =
   -D USERMOD_MPU6050_IMU ; gyro/accelero for USERMOD_GAMES (ONLY WORKS IF USERMOD_FOUR_LINE_DISPLAY NOT INCLUDED - I2C SHARING BUG)
   -D USERMOD_GAMES ; WLEDMM usermod
   -D USERMOD_BATTERY ;; enable Battery usermod
-  -D USERMOD_BATTERY_USE_LIPO ;; use new "decharging curve" for LiPo cells
+  -D USERMOD_BATTERY_USE_LIPO ;; use new "discharging curve" for LiPo cells
   -D USERMOD_BH1750
   -D USERMOD_ANIMATED_STAIRCASE
   -D USERMOD_RTC ;; experimental
@@ -1124,7 +1124,7 @@ build_flags =
 [Speed_Flags]
 build_flags =
   -O2 ;; optimize for performance instead of size
-  ;-ffast-math ;; gives a few  (2-5) percent sppedup on ESP32-S3, but causes slight slowdown on classic ESP32
+  ;-ffast-math ;; gives a few  (2-5) percent speedup on ESP32-S3, but causes slight slowdown on classic ESP32
   -mtarget-align -free -fipa-pta ;; these are very useful, too
   -fno-jump-tables -fno-tree-switch-conversion                 ;; needed
   -freorder-blocks -Wwrite-strings -fstrict-volatile-bitfields ;; needed
@@ -1341,7 +1341,7 @@ build_flags = ${common.build_flags_esp8266}
   -D USERMOD_GAMES ; WLEDMM usermod
   ; -D USERMOD_ARTIFX ; this is compiling but not working due to low memory on 8266
   -D USERMOD_BATTERY ;; enable Battery usermod
-  -D USERMOD_BATTERY_USE_LIPO ;; use new "decharging curve" for LiPo cells
+  -D USERMOD_BATTERY_USE_LIPO ;; use new "discharging curve" for LiPo cells
   -D WLED_DEBUG_HOST='"192.168.x.x"' ;; to send debug messages over network to host 192.168.x.y - FQDN is also possible
   -D WLED_DEBUG_PORT=1768 ;; port for network debugging. default = 7868
   ; -D WLED_DEBUG
@@ -1882,7 +1882,7 @@ build_flags = ${common.build_flags} ${esp32s2.build_flags}
   -D HW_PIN_SCL=35 -D HW_PIN_SDA=33
   -D RLYPIN=9
   ;; -D HW_PIN_MOSISPI=11 -D HW_PIN_CLOCKSPI=7 -D HW_PIN_MISOSPI=9  ;; 9 already in use for RELAY, 7 for IR
-  -D SR_DMTYPE=1 -D I2S_SDPIN=34 -D I2S_CKPIN=14 -D I2S_WSPIN=17 -D MCLK_PIN=-1 ;; reommended for mini shield
+  -D SR_DMTYPE=1 -D I2S_SDPIN=34 -D I2S_CKPIN=14 -D I2S_WSPIN=17 -D MCLK_PIN=-1 ;; recommended for mini shield
   ;; -D FFTTASK_PRIORITY=2  ;; useful for testing FFT timing. reduces audio latency, but makes effects slower.
   ;; -D STATUSLED=15
   -D WLED_USE_MY_CONFIG

tools/ESP32-Chip_info.hpp

@@ -82,7 +82,7 @@ return F("DOUT");
 }
 
 
-//******** Flash Chip Speed is NOT correctl !!!! *****
+//******** Flash Chip Speed is NOT correct !!!! *****
 uint32_t my_ESP_getFlashChipSpeed(void)
 {
   const uint32_t spi_clock = REG_READ(SPI_CLOCK_REG(0));
@@ -413,7 +413,7 @@ void my_print_reset_reason(int reason)
     case 11 : Serial.print(" TGWDT_CPU_RESET");break;         /**<11, Time Group reset CPU*/
     case 12 : Serial.print(" SW_CPU_RESET");break;            /**<12, Software reset CPU*/
     case 13 : Serial.print(" RTCWDT_CPU_RESET");break;        /**<13, RTC Watch dog Reset CPU*/
-    case 14 : Serial.print(" EXT_CPU_RESET");break;           /**<14, for APP CPU, reseted by PRO CPU*/
+    case 14 : Serial.print(" EXT_CPU_RESET");break;           /**<14, for APP CPU, reset by PRO CPU*/
     case 15 : Serial.print(" RTCWDT_BROWN_OUT_RESET");break;  /**<15, Reset when the vdd voltage is not stable*/
     case 16 : Serial.print(" RTCWDT_RTC_RESET");break;        /**<16, RTC Watch dog reset digital core and rtc module*/
     case 17 : Serial.print(" TG1WDT_CPU_RESET");break;        /**<17, Time Group1 reset CPU*/
@@ -452,7 +452,7 @@ void my_verbose_print_reset_reason(int reason)
 
 
 /* 
- * parts below were created by softhack007, licended under GPL v3.0
+ * parts below were created by softhack007, licenced under GPL v3.0
  */
 
 void show_psram_info_part1(void)

usermods/Battery/usermod_v2_Battery.h

@@ -118,7 +118,7 @@ class UsermodBattery : public Usermod
     {
       #ifdef ARDUINO_ARCH_ESP32
         if ((batteryPin <0) || !pinManager.isPinAnalog(batteryPin)) return(-1.0f);  // WLEDMM avoid reading from invalid pin
-        // use calibrated millivolts analogread on esp32 (150 mV ~ 2450 mV default attentuation) and divide by 1000 to get from milivolts to volts and multiply by voltage multiplier and apply calibration value
+        // use calibrated millivolts analogread on esp32 (150 mV ~ 2450 mV default attenuation) and divide by 1000 to get from milliVolts to volts and multiply by voltage multiplier and apply calibration value
         return (analogReadMilliVolts(batteryPin) / 1000.0f) * voltageMultiplier  + calibration;
       #else
         // use analog read on esp8266 ( 0V ~ 1V no attenuation options) and divide by ADC precision 1023 and multiply by voltage multiplier and apply calibration value
@@ -216,7 +216,7 @@ class UsermodBattery : public Usermod
       */
       #ifdef USERMOD_BATTERY_USE_LIPO
         batteryLevel = mapf(voltage, minBatteryVoltage, maxBatteryVoltage, 0, 100); // basic mapping
-        // LiPo batteries have a differnt dischargin curve, see 
+        // LiPo batteries have a different dischargin curve, see 
         //  https://blog.ampow.com/lipo-voltage-chart/
         if (batteryLevel < 40.0f) 
           batteryLevel = mapf(batteryLevel, 0, 40, 0, 12);       // last 45% -> drops very quickly
@@ -413,7 +413,7 @@ class UsermodBattery : public Usermod
       oappend(SET_F("addInfo('Battery:indicator:threshold', 1, '%');"));
       oappend(SET_F("addInfo('Battery:indicator:duration', 1, 's');"));
       
-      // cannot quite get this mf to work. its exeeding some buffer limit i think
+      // cannot quite get this mf to work. its exceeding some buffer limit i think
       // what i wanted is a list of all presets to select one from
       // oappend(SET_F("bd=addDropdown('Battery:low-power-indicator', 'preset');"));
       // the loop generates: oappend(SET_F("addOption(bd, 'preset name', preset id);"));
@@ -612,7 +612,7 @@ class UsermodBattery : public Usermod
 
 
     /*
-     * Get the capacity of all cells in parralel sumed up
+     * Get the capacity of all cells in parallel summed up
      * unit: mAh
      */
     unsigned int getTotalBatteryCapacity()
@@ -788,7 +788,7 @@ class UsermodBattery : public Usermod
 
 
     /*
-     * Get low-power-indicator status when the indication is done thsi returns true
+     * Get low-power-indicator status when the indication is done this returns true
      */
     bool getLowPowerIndicatorDone()
     {

usermods/PWM_fan/usermod_PWM_fan.h

@@ -75,7 +75,7 @@ class PWMFanUsermod : public Usermod {
       pinMode(tachoPin, INPUT);
       digitalWrite(tachoPin, HIGH);
       attachInterrupt(digitalPinToInterrupt(tachoPin), rpm_fan, FALLING);
-      DEBUG_PRINTLN(F("Tacho sucessfully initialized."));
+      DEBUG_PRINTLN(F("Tacho successfully initialized."));
     }
 
     void deinitTacho(void) {
@@ -118,12 +118,12 @@ class PWMFanUsermod : public Usermod {
       if (pwmChannel == 255) { //no more free LEDC channels
         deinitPWMfan(); return;
       }
-      // configure LED PWM functionalitites
+      // configure LED PWM functionalities
       ledcSetup(pwmChannel, 25000, 8);
       // attach the channel to the GPIO to be controlled
       ledcAttachPin(pwmPin, pwmChannel);
       #endif
-      DEBUG_PRINTLN(F("Fan PWM sucessfully initialized."));
+      DEBUG_PRINTLN(F("Fan PWM successfully initialized."));
     }
 
     void deinitPWMfan(void) {

usermods/artifx/arti.h

@@ -9,7 +9,7 @@
           - #define ARDUINOJSON_DEFAULT_NESTING_LIMIT 100 //set this in ArduinoJson!!!, currently not necessary...
           - IF UPDATING THIS FILE IN THE WLED REPO, SEND A PULL REQUEST TO https://github.com/ewoudwijma/ARTI AS WELL!!!
    @later
-          - Code improvememt
+          - Code improvement
             - See 'for some weird reason this causes a crash on esp32'
             - check why column/lineno not correct
           - Definition improvements
@@ -2181,7 +2181,7 @@ public:
                     ERROR_ARTI("%s %s %s unknown\n", spaces+50-depth, key, variable_name);
                     valueStack->push(floatNull);
                   }
-                } // ! founnd
+                } // ! fouund
                 visitedAlready = true;
                 break;
               }

usermods/artifx/arti_wled.h

@@ -9,7 +9,7 @@
 
 #pragma once
 
-// For testing porposes, definitions should not only run on Arduino but also on Windows etc. 
+// For testing purposes, definitions should not only run on Arduino but also on Windows etc. 
 // Because compiling on arduino takes seriously more time than on Windows.
 // The plugin.h files replace native arduino calls by windows simulated calls (e.g. setPixelColor will become printf)
 
@@ -185,7 +185,7 @@ float ARTI::arti_external_function(uint8_t function, float par1, float par2, flo
 
         float halfLength = (circleLength-1)/2.0;
 
-        //calculate circle positions, round to 5 digits and then round again to cater for radians inprecision (e.g. 3.49->3.5->4)
+        //calculate circle positions, round to 5 digits and then round again to cater for radians imprecision (e.g. 3.49->3.5->4)
         int x = round(round((sin(radians(par1)) * halfLength + halfLength) * 10)/10) + deltaWidth;
         int y = round(round((halfLength - cos(radians(par1)) * halfLength) * 10)/10) + deltaHeight;
         return SEGMENT.XY(x,y);

usermods/artifx/artifx.js

@@ -82,7 +82,7 @@ function populateCEEditor(name, segID)
             <button class="btn infobtn btn-xs" onclick="location.href='https://mm.kno.wled.ge/moonmodules/arti-fx'" type="button">?</button><br>
             <br><i>Compile and Run Log</i><br>
             <textarea class="ceTextarea" id="ceLogArea"></textarea><br>
-            <i>Run log > 3 seconds is send to Serial Ouput.</i><br>
+            <i>Run log > 3 seconds is send to Serial Output.</i><br>
             <a href="#" onclick="downloadGHFile('HBB','presets.json',true,true);return false;" title="Download HBaas Base presets">🥚</a>
             <a href="#" onclick="downloadGHFile('HBE','presets.json',true,true);return false;" title="Download HBaas Effects presets">🥚</a>
             <a href="#" onclick="downloadGHFile('LM','presets.json',true,true);return false;" title="Download Ledmap presets">🥚</a>`;

usermods/artifx/usermod_v2_artifx.h

@@ -19,7 +19,7 @@ ARTI * arti;
 //effect function
 uint16_t mode_ARTIFX(void) { 
   //tbd: move statics to SEGMENT.data
-  static bool succesful;
+  static bool successful;
   static bool notEnoughHeap;
 
   static char previousEffect[charLength];
@@ -46,20 +46,20 @@ uint16_t mode_ARTIFX(void) {
     // artiWrapper = reinterpret_cast<ArtiWrapper*>(SEGENV.data);
     arti = new ARTI();
 
-    succesful = arti->setup("/wledv033.json", currentEffect);
+    successful = arti->setup("/wledv033.json", currentEffect);
 
-    if (!succesful)
+    if (!successful)
-      ERROR_ARTI("Setup not succesful\n");
+      ERROR_ARTI("Setup not successful\n");
   }
   else 
   {
-    if (succesful) // && SEGENV.call < 250 for each frame
+    if (successful) // && SEGENV.call < 250 for each frame
     {
       if (FREE_SIZE <= 20000) 
       {
         ERROR_ARTI("Not enough free heap (%u <= 30000)\n", FREE_SIZE);
         notEnoughHeap = true;
-        succesful = false;
+        successful = false;
       }
       else
       {
@@ -71,7 +71,7 @@ uint16_t mode_ARTIFX(void) {
         //   previousCall = SEGENV.call;
         // }
         
-        succesful = arti->loop();
+        successful = arti->loop();
       }
     }
     else 
@@ -79,7 +79,7 @@ uint16_t mode_ARTIFX(void) {
       arti->closeLog();
       if (notEnoughHeap && FREE_SIZE > 20000) {
         ERROR_ARTI("Again enough free heap, restart effect (%u > 30000)\n", FREE_SIZE);
-        succesful = true;
+        successful = true;
         notEnoughHeap = false;
         strcpy(previousEffect, ""); // force new create
       }

usermods/mcu_temp/mcuTemp.h

@@ -9,7 +9,7 @@ class mcuTemp : public Usermod
 private:
   float mcutemp = 0;
 
-  // any private methods should go here (non-inline methosd should be defined out of class)
+  // any private methods should go here (non-inline method should be defined out of class)
   void publishMqtt(const char *state, bool retain = false); // example for publishing MQTT message
 
 public:

usermods/mpu6050_imu/usermod_mpu6050_imu.h

@@ -185,7 +185,7 @@ class MPU6050Driver : public Usermod {
         //INTERRUPT_PIN = -1;
         //return;
       }
-      if ((INTERRUPT_PIN >= 0) && (pinManager.getPinOwner(INTERRUPT_PIN) != PinOwner::UM_IMU)  // only allocate pin if we don't ownn it already
+      if ((INTERRUPT_PIN >= 0) && (pinManager.getPinOwner(INTERRUPT_PIN) != PinOwner::UM_IMU)  // only allocate pin if we don't own it already
          && !pinManager.allocatePin(INTERRUPT_PIN, false, PinOwner::UM_IMU))
       {
         //enabled = false;

usermods/usermod_v2_four_line_display_ALT/usermod_v2_four_line_display_ALT.h

@@ -671,7 +671,7 @@ void FourLineDisplayUsermod::setup() {
     }
     // start SPI now!
 #ifdef ARDUINO_ARCH_ESP32
-    if (isHW) SPI.begin(spi_sclk, spi_miso, spi_mosi);   // ESP32 - will silently fail if SPI alread active.
+    if (isHW) SPI.begin(spi_sclk, spi_miso, spi_mosi);   // ESP32 - will silently fail if SPI already active.
 #else
     if (isHW) SPI.begin();                               // ESP8266 - SPI pins are fixed
 #endif

usermods/usermod_v2_mode_sort/usermod_v2_mode_sort.h

@@ -59,7 +59,7 @@ int re_qstringCmp(const void *ap, const void *bp) {
             // Lowercase
             bVal -= 32;
         }
-        // Relly we shouldn't ever get to '\0'
+        // Really we shouldn't ever get to '\0'
         if (aVal == '"' || bVal == '"' || aVal == '\0' || bVal == '\0') {
             // We're done. one is a substring of the other
             // or something happenend and the quote didn't stop us.

usermods/usermod_v2_rotary_encoder_ui/usermod_v2_rotary_encoder_ui.h

@@ -113,7 +113,7 @@ public:
       //      tracking the owner tags....
       pinA = pinB = pinC = -1;
       enabled = false;
-      DEBUG_PRINTLN(F("Failed to alocate GPIO pins for Usermod Rotary Encoder."));   //WLEDMM add debug info
+      DEBUG_PRINTLN(F("Failed to allocate GPIO pins for Usermod Rotary Encoder."));   //WLEDMM add debug info
       return;
     }
 

usermods/usermod_v2_rotary_encoder_ui_ALT/usermod_v2_rotary_encoder_ui_ALT.h

@@ -436,7 +436,7 @@ void RotaryEncoderUIUsermod::setup()
     //      tracking the owner tags....
     pinA = pinB = pinC = -1;
     enabled = false;
-    DEBUG_PRINTLN(F("Failed to alocate GPIO pins for Usermod Rotary Encoder (ALT)."));   //WLEDMM add debug info
+    DEBUG_PRINTLN(F("Failed to allocate GPIO pins for Usermod Rotary Encoder (ALT)."));   //WLEDMM add debug info
     return;
   }
 

usermods/usermod_v2_weather/usermod_v2_weather.h

@@ -7,7 +7,7 @@
 
 // #define WEATHER_DEBUG
 
-//declare weathermod global variables (always precede with weather_ (psuedo class static variables)
+//declare weathermod global variables (always precede with weather_ (pseudo class static variables)
 static uint32_t usermods_pushLoop = 0; //effect pushes loop to execute. might be interesting for audioreactive too
 static uint8_t  weather_units = 1; //config var metric (celsius) is default. (Standard=Kelvin, Imperial is Fahrenheit)
 static float    weather_minTemp = 0; //config var
@@ -159,7 +159,7 @@ class WeatherUsermod : public Usermod {
     }
 
     void loop() {
-      // return if no location  or no api key (reset lastTume to force loop)
+      // return if no location  or no api key (reset lastTime to force loop)
       if (fabs(latitude) < 0.00001 && fabs(latitude) < 0.00001) {strcpy(errorMessage, PSTR("No location")); lastTime = 0; return;}
       if (strcmp(apiKey.c_str(), "") == 0) {strcpy(errorMessage, PSTR("No api key")); lastTime = 0; return;}
 
@@ -181,12 +181,12 @@ class WeatherUsermod : public Usermod {
         if (strcmp(errorMessage, "") == 0) {
 
           // https://arduinojson.org/v6/how-to/deserialize-a-very-large-document/
-          StaticJsonDocument<256> filter; //in practive about 128
+          StaticJsonDocument<256> filter; //in practice about 128
           filter["list"][0]["dt"] = true;
           filter["list"][0]["main"]["temp"] = true;
           filter["city"]["name"] = true;
           filter["city"]["country"] = true;
-          PSRAMDynamicJsonDocument weatherDoc(4096); //in practive about 2673
+          PSRAMDynamicJsonDocument weatherDoc(4096); //in practice about 2673
 
           // Parse JSON object
           DeserializationError error = deserializeJson(weatherDoc, client, DeserializationOption::Filter(filter));
@@ -206,7 +206,7 @@ class WeatherUsermod : public Usermod {
             JsonObject weatherDocObject = weatherDoc.as<JsonObject>();
             JsonArray list = weatherDocObject[F("list")];
             JsonObject city = weatherDocObject["city"];
-            strcat(errorMessage, city["name"]); //api succesfull
+            strcat(errorMessage, city["name"]); //api successful
             strcat(errorMessage, city["country"]);
 
             uint8_t i = 0;
@@ -319,10 +319,10 @@ class WeatherUsermod : public Usermod {
 
       oappend(SET_F("dd=addDropdown('Weather','units');"));
       oappend(SET_F("addOption(dd,'Kelvin',0);"));
-      oappend(SET_F("addOption(dd,'Celcius',1);"));
+      oappend(SET_F("addOption(dd,'Celsius',1);"));
       oappend(SET_F("addOption(dd,'Fahrenheit',2);"));
       oappend(SET_F("addInfo('Weather:units',1,'<i>Set time and location in time settings</i>');"));
-      oappend(SET_F("addInfo('Weather:apiKey',1,'<i>Create acount on openweathermap.org and copy the key</i>');"));
+      oappend(SET_F("addInfo('Weather:apiKey',1,'<i>Create account on openweathermap.org and copy the key</i>');"));
       oappend(SET_F("addInfo('Weather:minTemp',1,'<i>Changing values: Reboot to (re)load forecast</i>');"));
     }
 

wled00/FX.cpp

@@ -48,7 +48,7 @@ static uint16_t triwave16(uint16_t in) {
 }
 
 /*
- * Generates a tristate square wave w/ attac & decay
+ * Generates a tristate square wave w/ attack & decay
  * @param x input value 0-255
  * @param pulsewidth 0-127
  * @param attdec attack & decay, max. pulsewidth / 2
@@ -3016,7 +3016,7 @@ static uint16_t rolling_balls(void) {
     if (SEGMENT.check1) {
       for (int j = i+1; j < numBalls; j++) {
         if (balls[j].velocity != balls[i].velocity) {
-          //  tcollided + balls[j].lastBounceUpdate is acutal time of collision (this keeps precision with long to float conversions)
+          //  tcollided + balls[j].lastBounceUpdate is actual time of collision (this keeps precision with long to float conversions)
           float tcollided = (cfac*(balls[i].height - balls[j].height) +
                 balls[i].velocity*float(balls[j].lastBounceUpdate - balls[i].lastBounceUpdate))/(balls[j].velocity - balls[i].velocity);
 
@@ -5148,7 +5148,7 @@ uint16_t mode_2Dgameoflife(void) { // Written by Ewoud Wijma, inspired by https:
   bool repetition = false;
   for (int i=0; i<crcBufferLen && !repetition; i++) repetition = (crc == crcBuffer[i]); // (Ewowi)
   // same CRC would mean image did not change or was repeating itself
-  // -> softhack007: not exacly. Different CRC means diferent image; same CRC means nothing (could be same or slightly different).
+  // -> softhack007: not exacly. Different CRC means different image; same CRC means nothing (could be same or slightly different).
   if (!repetition) SEGENV.step = strip.now; //if no repetition avoid reset
   // remember CRCs across frames
   crcBuffer[SEGENV.aux0] = crc;

wled00/FX_2Dfcn.cpp

@@ -52,7 +52,7 @@ void WS2812FX::setUpMatrix() {
     }
 
     // safety check 
-    // WLEDMM no chech on Segment::maxWidth * Segment::maxHeight > MAX_LEDS || 
+    // WLEDMM no check on Segment::maxWidth * Segment::maxHeight > MAX_LEDS || 
     if (Segment::maxWidth <= 1 || Segment::maxHeight <= 1) {
       DEBUG_PRINTF("2D Bounds error. %d x %d\n", Segment::maxWidth, Segment::maxHeight);
       isMatrix = false;
@@ -173,7 +173,7 @@ void WS2812FX::setUpMatrix() {
 }
 
 // absolute matrix version of setPixelColor()
-void IRAM_ATTR_YN WS2812FX::setPixelColorXY(int x, int y, uint32_t col) //WLEDMM: IRAM_ATTR conditionaly
+void IRAM_ATTR_YN WS2812FX::setPixelColorXY(int x, int y, uint32_t col) //WLEDMM: IRAM_ATTR conditionally
 {
 #ifndef WLED_DISABLE_2D
   if (!isMatrix) return; // not a matrix set-up
@@ -207,7 +207,7 @@ uint32_t WS2812FX::getPixelColorXY(uint16_t x, uint16_t y) {
 // XY(x,y) - gets pixel index within current segment (often used to reference leds[] array element)
 // WLEDMM Segment::XY()is declared inline, see FX.h
 
-void IRAM_ATTR_YN Segment::setPixelColorXY(int x, int y, uint32_t col) //WLEDMM: IRAM_ATTR conditionaly
+void IRAM_ATTR_YN Segment::setPixelColorXY(int x, int y, uint32_t col) //WLEDMM: IRAM_ATTR conditionally
 {
   if (Segment::maxHeight==1) return; // not a matrix set-up
   if (x >= virtualWidth() || y >= virtualHeight() || x<0 || y<0) return;  // if pixel would fall out of virtual segment just exit

wled00/FX_fcn.cpp

@@ -146,7 +146,7 @@ Segment::Segment(Segment &&orig) noexcept {
   orig.jMap = nullptr;    //WLEDMM jMap
 }
 
-// copy assignment --> overwrite segment withg orig - deletes old buffers in "this", but does not change orig!
+// copy assignment --> overwrite segment with orig - deletes old buffers in "this", but does not change orig!
 Segment& Segment::operator= (const Segment &orig) {
   DEBUG_PRINTLN(F("-- Copy-assignment segment --"));
   if (this != &orig) {
@@ -833,7 +833,7 @@ void xyFromBlock(uint16_t &x,uint16_t &y, uint16_t i, uint16_t vW, uint16_t vH,
 
 }
 
-void IRAM_ATTR_YN Segment::setPixelColor(int i, uint32_t col) //WLEDMM: IRAM_ATTR conditionaly
+void IRAM_ATTR_YN Segment::setPixelColor(int i, uint32_t col) //WLEDMM: IRAM_ATTR conditionally
 {
   if (!isActive()) return; // not active
 #ifndef WLED_DISABLE_2D
@@ -942,7 +942,7 @@ void IRAM_ATTR_YN Segment::setPixelColor(int i, uint32_t col) //WLEDMM: IRAM_ATT
 
   uint16_t len = length();
   uint8_t _bri_t = currentBri(on ? opacity : 0);
-  if (!_bri_t && !transitional && fadeTransition) return; // if _bri_t == 0 && segment is not transitionig && transitions are enabled then save a few CPU cycles
+  if (!_bri_t && !transitional && fadeTransition) return; // if _bri_t == 0 && segment is not transitioning && transitions are enabled then save a few CPU cycles
   if (_bri_t < 255) {
     byte r = scale8(R(col), _bri_t);
     byte g = scale8(G(col), _bri_t);
@@ -1223,7 +1223,7 @@ void Segment::fade_out(uint8_t rate) {
     int g1 = G(color);
     int b1 = B(color);
 
-    int wdelta = mappedRate_r * (w2 - w1);  // WLEDMM use receprocal - its faster
+    int wdelta = mappedRate_r * (w2 - w1);  // WLEDMM use reciprocal - its faster
     int rdelta = mappedRate_r * (r2 - r1);
     int gdelta = mappedRate_r * (g2 - g1);
     int bdelta = mappedRate_r * (b2 - b1);
@@ -1502,7 +1502,7 @@ void WS2812FX::enumerateLedmaps() {
 void WS2812FX::finalizeInit(void)
 {
   //reset segment runtimes
-  suspendStripService = true; // WELDMM avoid running effects on an incomplete strip
+  suspendStripService = true; // WLEDMM avoid running effects on an incomplete strip
   for (segment &seg : _segments) {
     seg.markForReset();
     seg.resetIfRequired();
@@ -1583,11 +1583,11 @@ void WS2812FX::finalizeInit(void)
   DEBUG_PRINTLN(F("Loading custom ledmaps"));
   deserializeMap();     // (re)load default ledmap
   _isServicing = false;        // WLEDMM
-  suspendStripService = false; // WELDMM ready, run !
+  suspendStripService = false; // WLEDMM ready, run !
 }
 
 // WLEDMM wait until strip is idle (=not servicing).
-// on 8266 this function does nothing, because we can only do "buisy waiting" on ESP32
+// on 8266 this function does nothing, because we can only do "busy waiting" on ESP32
 #define MAX_IDLE_WAIT_MS 50  // seems to work in most cases
 void WS2812FX::waitUntilIdle(void) {
 #if defined(ARDUINO_ARCH_ESP32) && defined(WLEDMM_PROTECT_SERVICE)
@@ -1755,7 +1755,7 @@ void WS2812FX::estimateCurrentAndLimitBri() {
     uint8_t scaleB = (scaleI > 255) ? 255 : scaleI;
     uint8_t newBri = scale8(_brightness, scaleB);
     // to keep brightness uniform, sets virtual busses too - softhack007: apply reductions immediately
-    if (scaleB < 255) busses.setBrightness(scaleB, true); // NPB-LG has already applied brightness, so its suffifient to post-apply scaling ==> use scaleB instead of newBri
+    if (scaleB < 255) busses.setBrightness(scaleB, true); // NPB-LG has already applied brightness, so its sufficient to post-apply scaling ==> use scaleB instead of newBri
     busses.setBrightness(newBri, false);                  // set new brightness for next frame
     //currentMilliamps = (powerSum0 * newBri) / puPerMilliamp; // for NPBrightnessBus
     currentMilliamps = (powerSum0 * scaleB) / puPerMilliamp;   // for NPBus-LG
@@ -1787,7 +1787,7 @@ void WS2812FX::show(void) {
   if (diff > 0) fpsCurr = 1000 / diff;
   _cumulativeFps = (3 * _cumulativeFps + fpsCurr +2) >> 2;   // "+2" for proper rounding (2/4 = 0.5)
   #if defined(ARDUINO_ARCH_ESP32) && defined(WLEDMM_FASTPATH)
-  _lastShow = b4show;  // WLEDMM this is more accurate, however it also icreases CPU load - strip.service will run more frequently
+  _lastShow = b4show;  // WLEDMM this is more accurate, however it also increases CPU load - strip.service will run more frequently
   #else
   _lastShow = now;
   #endif
@@ -2234,7 +2234,7 @@ bool WS2812FX::deserializeMap(uint8_t n) {
     if (n) sprintf(fileName +7, "%d", n); //WLEDMM: trick to not include 0 in ledmap.json
     strcat(fileName, ".json");
     isFile = WLED_FS.exists(fileName);
-  } else { //WLEDM add segment name as ledmap.name
+  } else { //WLEDMM add segment name as ledmap.name
     uint8_t segment_index = 0;
     for (segment &seg : _segments) {
       if (n == 10 + segment_index && !isFile && seg.name != nullptr) {
@@ -2248,7 +2248,7 @@ bool WS2812FX::deserializeMap(uint8_t n) {
 
   if (!isFile) {
     // erase custom mapping if selecting nonexistent ledmap.json (n==0)
-    //WLEDM: doubt this is necessary as return false causes setupMatrix to deal with this !!!!
+    //WLEDMM: doubt this is necessary as return false causes setupMatrix to deal with this !!!!
     if (!isMatrix && !n) {
       customMappingSize = 0;
       loadedLedmap = 0; //WLEDMM

wled00/cfg.cpp

@@ -365,7 +365,7 @@ bool deserializeConfig(JsonObject doc, bool fromFS) {
   JsonObject light = doc[F("light")];
   byte prev; //WLEDMM
   int tdd; //WLEDMM
-  if (!light.isNull()) { //WLEDMM: in case cfg string does not contain light! (solves issue that somethimes gamma correction dissappears)
+  if (!light.isNull()) { //WLEDMM: in case cfg string does not contain light! (solves issue that sometimes gamma correction dissappears)
     CJSON(briMultiplier, light[F("scale-bri")]);
     CJSON(strip.paletteBlend, light[F("pal-mode")]);
     CJSON(autoSegments, light[F("aseg")]);

wled00/colors.cpp

@@ -325,7 +325,7 @@ static byte gammaT[256] = {
 // experimental
 // CIE 1931 lookup table (8bit->8bit) that was proposed during discussion of issue #2767
 // https://github.com/Aircoookie/WLED/issues/2767#issuecomment-1310961308
-// unfortunately NepixelsBu has its own internal table, that kills low brightness values similar to the original WLED table.
+// unfortunately NeoPixelBus has its own internal table, that kills low brightness values similar to the original WLED table.
 //   see https://github.com/Makuna/NeoPixelBus/blob/master/src/internal/NeoGamma.h
 static const byte gammaT[256] = {
   0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 2, 2, 

wled00/data/index.js

@@ -1384,7 +1384,7 @@ function toggleBubble(e)
 }
 
 // updates segment length upon input of segment values
-function updateLen(s, draw=true) //WLEDMM conditonally draw segment view
+function updateLen(s, draw=true) //WLEDMM conditionally draw segment view
 {
 	if (!gId(`seg${s}s`)) return;
 	var start = parseInt(gId(`seg${s}s`).value);

wled00/data/peek.js

@@ -25,7 +25,7 @@ function peek(c) {
 					let mW = leds[2]; // matrix width
 					let mH = leds[3]; // matrix height
 					let pPL = Math.min(c.width / mW, c.height / mH); // pixels per LED (width of circle)
-					let lOf = Math.floor((c.width - pPL*mW)/2); //left offeset (to center matrix)
+					let lOf = Math.floor((c.width - pPL*mW)/2); //left offset (to center matrix)
 					var i = 4; //same offset as in ws.cpp
 					ctx.clearRect(0, 0, c.width, c.height); //WLEDMM
 					function colorAmp(color) {

wled00/data/settings_um.htm

@@ -370,7 +370,7 @@
 		<span id="lssuc" style="color:green; display:none">&#10004; Configuration saved!</span>
 		<span id="lserr" style="color:red; display:none">&#9888; Could not load configuration.</span>
 		</div>
-		<!-- WLEDMM: no gpios here as it is generated -->
+		<!-- WLEDMM: no GPIOs here as it is generated -->
 		<div id="um">Loading settings...</div>
 		<div name="errorMessage"></div>
 		<hr><button type="button" onclick="B()">Back</button><button type="submit">Save</button>

wled00/json.cpp

@@ -1051,7 +1051,7 @@ void serializeInfo(JsonObject root)
   }
   #endif
   #if defined(WLED_DEBUG) || defined(WLED_DEBUG_HOST) || defined(SR_DEBUG) || defined(SR_STATS)
-  // WLEDMM add status of Serial, incuding pin alloc
+  // WLEDMM add status of Serial, including pin alloc
   root[F("serialOnline")] = Serial ? (canUseSerial()?F("Serial ready ☾"):F("Serial in use ☾")) : F("Serial disconected ☾");  // "Disconnected" may happen on boards with USB CDC
   root[F("sRX")] = pinManager.isPinAllocated(hardwareRX) ? pinManager.getPinOwnerText(hardwareRX): F("free");
   root[F("sTX")] = pinManager.isPinAllocated(hardwareTX) ? pinManager.getPinOwnerText(hardwareTX): F("free");
@@ -1330,7 +1330,7 @@ void serializeModeData(JsonArray fxdata)
 }
 
 // deserializes mode names string into JsonArray
-// also removes effect data extensions (@...) from deserialised names
+// also removes effect data extensions (@...) from deserialized names
 void serializeModeNames(JsonArray arr) {
   char lineBuffer[128];
   for (size_t i = 0; i < strip.getModeCount(); i++) {

wled00/led.cpp

@@ -293,7 +293,7 @@ void handleNightlight()
 }
 
 //utility for FastLED to use our custom timer
-uint32_t __attribute__((pure)) get_millisecond_timer() // WLEDMM attribute pure = does not write other momory
+uint32_t __attribute__((pure)) get_millisecond_timer() // WLEDMM attribute pure = does not write other memory
 {
   return strip.now;
 }

wled00/net_debug.cpp

@@ -1,6 +1,6 @@
 #include "wled.h"
 
-#ifdef WLED_DEBUG_HOST //WLEDMM: this looks unnecesarry as .h is not included anyway if no netdebug
+#ifdef WLED_DEBUG_HOST //WLEDMM: this looks unnecessary as .h is not included anyway if no netdebug
 
 size_t NetworkDebugPrinter::write(uint8_t c) {
   if (!WLED_CONNECTED || !netDebugEnabled) return 0;

wled00/pin_manager.cpp

@@ -46,7 +46,7 @@ String PinManagerClass::getOwnerText(PinOwner tag) {
     case PinOwner::HW_I2C     : return(F("I2C (hw)")); break;            // 'I2C'  == hardware I2C pins (4&5 on ESP8266, 21&22 on ESP32)
     case PinOwner::HW_SPI     : return(F("SPI (hw)")); break;            // 'SPI'  == hardware (V)SPI pins (13,14&15 on ESP8266, 5,18&23 on ESP32)
 
-    case PinOwner::UM_Audioreactive     : return(F("AudioReactive (UM)")); break;     // audioreative usermod - analog or digital audio input
+    case PinOwner::UM_Audioreactive     : return(F("AudioReactive (UM)")); break;     // audioreactive usermod - analog or digital audio input
     case PinOwner::UM_Temperature       : return(F("Temperature (UM)")); break;       // "usermod_temperature.h"
     case PinOwner::UM_PIR               : return(F("PIR (UM)")); break;               // "usermod_PIR_sensor_switch.h"
     case PinOwner::UM_IMU               : return(F("IMU mpu6050 (UM)")); break;       // "usermod_mpu6050_imu.h"
@@ -72,7 +72,7 @@ String PinManagerClass::getPinSpecialText(int gpio) {  // special purpose PIN in
   if ((gpio == 0xFF) || (gpio < 0)) return(F(""));      // explicitly allow -1 as a no-op
 
 #ifdef USERMOD_AUDIOREACTIVE
-  // audioreactive settings - unfortunately, these are hiddden inside usermod now :-(
+  // audioreactive settings - unfortunately, these are hidden inside usermod now :-(
   // if((gpio == audioPin) && (dmType == 0)) return(F("analog audio in"));
   // if((gpio == i2ssdPin) && (dmType > 0)) return(F("I2S SD"));
   // if((gpio == i2swsPin) && (dmType > 0)) return(F("I2S WS"));
@@ -272,7 +272,7 @@ String PinManagerClass::getPinConflicts(int gpio) {
 
   if ((ownerConflict[gpio] == PinOwner::None) || (ownerTag[gpio] == ownerConflict[gpio])) { // no conflict, or "fake" conflict with current owner
     return(F(""));             // no conflict fot this GPIO
-  } else {                     // found previous conflic!
+  } else {                     // found previous conflict!
     return String("!! Conflict with ") + getOwnerText(ownerConflict[gpio]) + String(" !!");
   }
 }

wled00/set.cpp

@@ -609,7 +609,7 @@ void handleSettingsSet(AsyncWebServerRequest *request, byte subPage)
       i2c_scl = hw_scl_pin;
       DEBUG_PRINTF("handleSettingsSet(): reserved I2C pins SDA=%d SCL=%d.\n", i2c_sda, i2c_scl);
       #ifdef ESP32
-      Wire.setPins(i2c_sda, i2c_scl); // this will fail if Wire is initilised (Wire.begin() called)
+      Wire.setPins(i2c_sda, i2c_scl); // this will fail if Wire is initialised (Wire.begin() called)
       #endif
       // Wire.begin(); // WLEDMM moved into pinManager
     } else {

wled00/util.cpp

@@ -149,13 +149,13 @@ bool oappend(const char* txt)
 {
   uint16_t len = strlen(txt);
   if ((obuf == nullptr) || (olen + len >= SETTINGS_STACK_BUF_SIZE)) { // sanity checks
-	if (obuf == nullptr) { USER_PRINTLN(F("oappend() error: obuf == nullptr."));
+	  if (obuf == nullptr) { USER_PRINTLN(F("oappend() error: obuf == nullptr."));
-	} else {
+	  } else {
-	  USER_PRINT(F("oappend() error: buffer full. Increase SETTINGS_STACK_BUF_SIZE for "));
+	    USER_PRINT(F("oappend() error: buffer full. Increase SETTINGS_STACK_BUF_SIZE for "));
       USER_PRINTF("%2u bytes \t\"", len /*1 + olen + len - SETTINGS_STACK_BUF_SIZE*/);
       USER_PRINT(txt);
       USER_PRINTLN(F("\""));
-	}
+	  }
     return false;        // buffer full
   }
   strcpy(obuf + olen, txt);

wled00/wled.cpp

@@ -212,7 +212,7 @@ void WLED::loop()
     #endif
     if (!offMode || strip.isOffRefreshRequired()) {
 #if defined(ARDUINO_ARCH_ESP32) && defined(WLEDMM_PROTECT_SERVICE)  // WLEDMM experimental 
-      static unsigned long lastTimeService = 0; // WLEMM needed to remove stale lock
+      static unsigned long lastTimeService = 0; // WLEDMM needed to remove stale lock
       if (!suspendStripService && !doInitBusses && !loadLedmap) { // WLEDMM prevent effect drawing while strip or segments are being updated
 #endif
         strip.service();

wled00/wled.h

@@ -8,7 +8,7 @@
  */
 
 // version code in format yymmddb (b = daily build)
-#define VERSION 2312130
+#define VERSION 2312150
 
 //WLEDMM + Moustachauve/Wled-Native 
 // You can define custom product info from build flags.
@@ -555,7 +555,7 @@ WLED_GLOBAL byte lastRandomIndex _INIT(0);        // used to save last random co
 
 // transitions
 WLED_GLOBAL bool          transitionActive        _INIT(false);
-WLED_GLOBAL uint16_t      transitionDelayDefault  _INIT(transitionDelay); // default transition time (storec in cfg.json)
+WLED_GLOBAL uint16_t      transitionDelayDefault  _INIT(transitionDelay); // default transition time (stored in cfg.json)
 WLED_GLOBAL uint16_t      transitionDelayTemp     _INIT(transitionDelay); // actual transition duration (overrides transitionDelay in certain cases)
 WLED_GLOBAL unsigned long transitionStartTime;
 WLED_GLOBAL float         tperLast                _INIT(0.0f);            // crossfade transition progress, 0.0f - 1.0f
@@ -733,7 +733,7 @@ WLED_GLOBAL bool e131NewData _INIT(false);
 WLED_GLOBAL BusManager busses _INIT(BusManager());
 WLED_GLOBAL WS2812FX strip _INIT(WS2812FX());
 WLED_GLOBAL BusConfig* busConfigs[WLED_MAX_BUSSES+WLED_MIN_VIRTUAL_BUSSES] _INIT({nullptr}); //temporary, to remember values from network callback until after
-// WLEDMM a few "poor man's" mutal exclusion (mutex) flags, because there are not mutex objects on 8266.
+// WLEDMM a few "poor man's" mutual exclusion (mutex) flags, because there are not mutex objects on 8266.
 WLED_GLOBAL volatile bool doInitBusses _INIT(false);        // WLEDMM "volatile" added - needed as we want to sync parallel tasks
 WLED_GLOBAL volatile bool loadLedmap _INIT(false);          // WLEDMM use as bool and use loadedLedmap for Nr
 WLED_GLOBAL volatile uint8_t loadedLedmap _INIT(0);         // WLEDMM default 0

wled00/wled_serial.cpp

@@ -4,7 +4,7 @@
  * Adalight and TPM2 handler
  */
 
-#define SERIAL_MAXTIME_MILLIS 100 // to avoid blocking other activities, do not spend more than 100ms with continouus reading
+#define SERIAL_MAXTIME_MILLIS 100 // to avoid blocking other activities, do not spend more than 100ms with continuous reading
 // at 115200 baud, 100ms is enough to send/receive 1280 chars
 
 enum class AdaState {

wled00/ws.cpp

@@ -171,13 +171,13 @@ void sendDataWs(AsyncWebSocketClient * client)
   releaseJSONBufferLock();
 }
 
-// WLEDMM function to recover full-brigh pixel (based on code from upstream alt-buffer, which is based on code from NeoPixelBrightnessBus)
+// WLEDMM function to recover full-bright pixel (based on code from upstream alt-buffer, which is based on code from NeoPixelBrightnessBus)
 static uint32_t restoreColorLossy(uint32_t c, uint_fast8_t _restaurationBri) {
   if (_restaurationBri == 255) return c;
   uint8_t* chan = (uint8_t*) &c;
   for (uint_fast8_t i=0; i<4; i++) {
     uint_fast16_t val = chan[i];
-    chan[i] = ((val << 8) + _restaurationBri) / (_restaurationBri + 1); //adding _bri slighly improves recovery / stops degradation on re-scale
+    chan[i] = ((val << 8) + _restaurationBri) / (_restaurationBri + 1); //adding _bri slightly improves recovery / stops degradation on re-scale
   }
   return c;
 }