platformio.ini cleanup
* re-organized default_env by board type * added a note saying if HUB75 support is included * esp32 buildenv cleanup (removed not used flags) * env:esp32_4MB_PSRAM_M deleted * flash usage statistics
This commit is contained in:
Frank
253
platformio.ini
253
platformio.ini
@@ -55,11 +55,11 @@ default_envs =
|
||||
esp32_4MB_XL
|
||||
; esp32_16MB_S ;; experimental, optimized for speed
|
||||
esp32_16MB_M ;; esp32 recommended for boards with 16MB flash
|
||||
esp32_16MB_M_eth
|
||||
; esp32_16MB_M_debug
|
||||
; esp32_16MB_XL
|
||||
esp8266_2MB_S
|
||||
esp8266_4MB_S ;; recommended for 8266 with audio sync
|
||||
esp8266_4MB_M
|
||||
esp32_pico_4MB_M
|
||||
;;
|
||||
wemos_shield_esp32_4MB_M
|
||||
; wemos_shield_esp32_4MB_ICS4343x_M
|
||||
; wemos_shield_esp32_4MB_SPM1423_M
|
||||
@@ -69,38 +69,48 @@ default_envs =
|
||||
; wemos_shield_esp32_16MB_SPM1423_M
|
||||
; wemos_shield_esp32_16MB_SPM1423_XL
|
||||
; wemos_shield_esp32_16MB_LineIn_M
|
||||
esp32_pico_4MB_M
|
||||
esp32_4MB_PSRAM_S
|
||||
; esp32_4MB_PSRAM_REV3_S ;; experimental, optimized for WROVER-E with "revision3" chip
|
||||
esp32S3_4MB_S
|
||||
esp32S3_8MB_S ;; experimental, optimized for speed
|
||||
esp32S3_8MB_M
|
||||
esp32S3_4MB_PSRAM_S ;; for lolin s3 mini, S3 zero, S3 super mini - optimized for speed
|
||||
esp32S3_4MB_PSRAM_M ;; for lolin s3 mini, S3 zero, S3 super mini
|
||||
esp32S3_8MB_PSRAM_M ;; experiemental
|
||||
esp32S3_16MB_PSRAM_M_HUB75 ;; for S3 with 16MB flash, and MOONHUB HUB75 adapter board
|
||||
esp32S3_WROOM-2_M ;; for S3 WROOM-2
|
||||
;; esp32s2_tinyUF2_PSRAM_S ;; experimental - only for adafruit -S2 boards with tinyUF2 bootloader !!!
|
||||
;;
|
||||
esp32_4MB_V4_S ;; experimental; HUB75 supported
|
||||
esp32_4MB_V4_HUB75_forum ;; experimental; HUB75 supported (forum pinout)
|
||||
esp32_16MB_V4_S ;; experimental - optimized for speed; HUB75 supported
|
||||
esp32_16MB_V4_M ;; experimental; HUB75 supported
|
||||
; esp32_16MB_V4_M_debug ;; experimental
|
||||
; esp32_pico_4MB_V4_S ;; experimental - may work better in case you experience wifi connectivity problems
|
||||
;;
|
||||
esp32_4MB_PSRAM_S ;; WROVER experimental; HUB75 supported
|
||||
; esp32_4MB_PSRAM_REV3_S ;; WROVER-E experimental, optimized for WROVER-E with "revision3" chip
|
||||
;;
|
||||
esp32S3_4MB_S ;; for HD-WF2 (HUB75 supported)
|
||||
esp32S3_8MB_S ;; experimental, optimized for speed, HUB75 supported
|
||||
esp32S3_8MB_M ;; HUB75 supported
|
||||
esp32S3_4MB_PSRAM_S ;; for lolin s3 mini, S3 zero, S3 super mini - optimized for speed (no HUB75 support)
|
||||
esp32S3_4MB_PSRAM_M ;; for lolin s3 mini, S3 zero, S3 super mini (no HUB75 support)
|
||||
esp32S3_8MB_PSRAM_M ;; experiemental; HUB75 supported
|
||||
esp32S3_16MB_PSRAM_M_HUB75 ;; for S3 with 16MB flash, HUB75 supported (MOONHUB HUB75 adapter board)
|
||||
esp32S3_WROOM-2_M ;; for S3 WROOM-2; HUB75 supported
|
||||
;;
|
||||
esp32s2_PSRAM_S ;; OTA-compatible with upstream
|
||||
esp32s2_PSRAM_M ;; for lolin S2 mini
|
||||
esp32c3dev_4MB_M ;; experimental
|
||||
;; esp32s2_tinyUF2_PSRAM_S ;; experimental - only for adafruit -S2 boards with tinyUF2 bootloader !!!
|
||||
;;
|
||||
esp32c3dev_2MB_M ;; experimental - 2MB Flash, no OTA
|
||||
esp32c3dev_4MB_M ;; experimental
|
||||
esp32c3mini_dio_4MB_M ;; for boards that need "dio" flash mode (instead of qio)
|
||||
seeed_esp32c3_4MB_S ;; experimental
|
||||
esp32_4MB_V4_S ;; experimental
|
||||
esp32_16MB_V4_S ;; experimental - optimized for speed
|
||||
esp32_16MB_V4_M ;; experimental
|
||||
esp32_16MB_V4_M_debug ;; experimental
|
||||
esp32_pico_4MB_V4_S ;; experimental - may work better in case you experience wifi connectivity problems
|
||||
esp8266pro_16MB_S
|
||||
;;
|
||||
esp8266_2MB_S
|
||||
esp8266_4MB_S ;; recommended for 8266 with audio sync
|
||||
esp8266_4MB_M
|
||||
; esp8266pro_16MB_S
|
||||
esp8266pro_16MB_M
|
||||
esp01_1MB_S
|
||||
esp32_16MB_M_eth
|
||||
;;
|
||||
athom_music_esp32_4MB_M
|
||||
adafruit_matrixportal_esp32s3
|
||||
adafruit_matrixportal_esp32s3 ;; HUB75 supported
|
||||
|
||||
; Go to MoonModules environments for environments
|
||||
|
||||
|
||||
src_dir = ./wled00
|
||||
data_dir = ./wled00/data
|
||||
build_cache_dir = ~/.platformio/buildcache
|
||||
@@ -249,8 +259,6 @@ lib_deps =
|
||||
;; https://github.com/softhack007/FastLED.git#ESP32-C6 ;; patched version needed for -C6
|
||||
IRremoteESP8266 @ 2.8.2
|
||||
;;makuna/NeoPixelBus @ 2.7.5 ;; WLEDMM will be added in board specific sections
|
||||
;;https://github.com/Aircoookie/ESPAsyncWebServer.git @ ~2.0.7
|
||||
;; https://github.com/lost-hope/ESPAsyncWebServer.git#master ;; WLEDMM to display .log and .wled files in /edit
|
||||
https://github.com/Aircoookie/ESPAsyncWebServer.git#v2.2.1 ;; newer with bugfixes and stability improvements
|
||||
#For use of the TTGO T-Display ESP32 Module with integrated TFT display uncomment the following line
|
||||
#TFT_eSPI
|
||||
@@ -1298,28 +1306,20 @@ build_flags = ${esp32_4MB_S_base.build_flags}
|
||||
${Speed_Flags.build_flags} ;; -O2 -> optimize for speed instead of size
|
||||
-D WLED_RELEASE_NAME=esp32_4MB_S
|
||||
-D WLEDMM_FASTPATH ; WLEDMM experimental option. Reduces audio lag (latency), and allows for faster LED framerates. May break compatibility with previous versions.
|
||||
;; for speed builds, we need to disable some features to stay within 4MB flash
|
||||
;-D WLED_DISABLE_ALEXA
|
||||
-D WLED_DISABLE_HUESYNC
|
||||
-D WLED_DISABLE_LOXONE
|
||||
;-D WLED_DISABLE_MQTT
|
||||
;-D WLED_DISABLE_INFRARED
|
||||
-D WLEDMM_SAVE_FLASH
|
||||
;-D WLEDMM_SAVE_FLASH
|
||||
;WLEDMM: disable the next line if you don't need "net Debug". It will free ~2% of flash
|
||||
${common_mm.NetDebug_build_flags}
|
||||
;; normal build
|
||||
; RAM: [=== ] 25.0% (used 81988 bytes from 327680 bytes)
|
||||
; Flash: [========= ] 87.4% (used 1374677 bytes from 1572864 bytes) WLEDMM: Earlier 85.7
|
||||
;; optimized-for-speed build
|
||||
; RAM: [=== ] 25.4% (used 83244 bytes from 327680 bytes)
|
||||
; Flash: [========= ] 93.3% (used 1466821 bytes from 1572864 bytes)
|
||||
; RAM: [== ] 23.6% (used 77188 bytes from 327680 bytes)
|
||||
; Flash: [========= ] 93.8% (used 1475997 bytes from 1572864 bytes)
|
||||
|
||||
[env:esp32_4MB_M]
|
||||
extends = esp32_4MB_M_base
|
||||
build_flags = ${esp32_4MB_M_base.build_flags}
|
||||
-D WLED_RELEASE_NAME=esp32_4MB_M
|
||||
; RAM: [=== ] 26.0% (used 85244 bytes from 327680 bytes)
|
||||
; Flash: [==========] 97.4% (used 1532125 bytes from 1572864 bytes)
|
||||
-D WLEDMM_SAVE_FLASH
|
||||
; RAM: [== ] 24.2% (used 79196 bytes from 327680 bytes)
|
||||
; Flash: [==========] 97.4% (used 1532425 bytes from 1572864 bytes)
|
||||
|
||||
[env:esp32_4MB_M_eth]
|
||||
extends = esp32_4MB_M_base
|
||||
@@ -1328,7 +1328,9 @@ build_flags = ${esp32_4MB_M_base.build_flags}
|
||||
-D WLED_USE_ETHERNET
|
||||
-D RLYPIN=-1 -D BTNPIN=-1 ;; Prevent clash
|
||||
-D WLED_DISABLE_ESPNOW ;; ESP-NOW requires wifi, may crash with ethernet only
|
||||
|
||||
-D WLEDMM_SAVE_FLASH
|
||||
; RAM: [== ] 24.2% (used 79404 bytes from 327680 bytes)
|
||||
; Flash: [==========] 97.8% (used 1538025 bytes from 1572864 bytes)
|
||||
|
||||
[env:esp32_4MB_XL]
|
||||
extends = esp32_4MB_XL_base
|
||||
@@ -1342,8 +1344,8 @@ build_flags = ${esp32_4MB_XL_base.build_flags}
|
||||
-D WLEDMM_SAVE_FLASH ;; a humble attempt to save a few extra bytes
|
||||
build_unflags = ${esp32_4MB_XL_base.build_unflags}
|
||||
board_build.partitions = tools/WLED_ESP32_4MB_256KB_FS.csv
|
||||
; RAM: [=== ] 26.3% (used 86188 bytes from 327680 bytes)
|
||||
; Flash: [========= ] 85.2% (used 1619513 bytes from 1900544 bytes)
|
||||
; RAM: [== ] 24.5% (used 80140 bytes from 327680 bytes)
|
||||
; Flash: [========= ] 85.8% (used 1630789 bytes from 1900544 bytes)
|
||||
|
||||
;; standard framework build for 16MB flash, optimized for speed
|
||||
[env:esp32_16MB_S]
|
||||
@@ -1361,13 +1363,9 @@ build_flags = ${esp32_4MB_S_base.build_flags}
|
||||
lib_deps = ${esp32_4MB_S_base.lib_deps}
|
||||
${common_mm.animartrix_lib_deps}
|
||||
; lib_ignore = IRremoteESP8266 ; use with WLED_DISABLE_INFRARED for faster compilation
|
||||
;;
|
||||
;; normal build
|
||||
; RAM: [=== ] 25.8% (used 84588 bytes from 327680 bytes)
|
||||
; Flash: [======= ] 68.3% (used 1431377 bytes from 2097152 bytes)
|
||||
;; optimized-for-speed build
|
||||
; RAM: [=== ] 25.8% (used 84652 bytes from 327680 bytes)
|
||||
; Flash: [======== ] 78.0% (used 1634829 bytes from 2097152 bytes)
|
||||
; RAM: [== ] 23.7% (used 77524 bytes from 327680 bytes)
|
||||
; Flash: [======= ] 72.9% (used 1528541 bytes from 2097152 bytes)
|
||||
|
||||
[env:esp32_16MB_M]
|
||||
extends = esp32_4MB_M_base
|
||||
@@ -1376,9 +1374,9 @@ build_flags = ${esp32_4MB_M_base.build_flags}
|
||||
board = esp32_16MB
|
||||
board_build.partitions = tools/WLED_ESP32_16MB.csv ;; WLED standard for 16MB flash: 2MB firmware, 12 MB filesystem
|
||||
;board_build.partitions = tools/WLED_ESP32_16MB_9MB_FS.csv ;; WLED extended for 16MB flash: 3.2MB firmware, 9 MB filesystem
|
||||
; RAM: [=== ] 26.0% (used 85244 bytes from 327680 bytes)
|
||||
; Flash: [======= ] 73.1% (used 1532125 bytes from 2097152 bytes)
|
||||
;lib_ignore = IRremoteESP8266 ; use with WLED_DISABLE_INFRARED for faster compilation
|
||||
; RAM: [== ] 24.2% (used 79196 bytes from 327680 bytes)
|
||||
; Flash: [======= ] 73.6% (used 1542905 bytes from 2097152 bytes)
|
||||
|
||||
[env:esp32_4MB_M_debug]
|
||||
extends = esp32_4MB_M_base
|
||||
@@ -1391,13 +1389,14 @@ build_flags = ${esp32_4MB_M_base.build_flags}
|
||||
-D CORE_DEBUG_LEVEL=2 ;; 2=warning
|
||||
-D WLED_RELEASE_NAME=esp32_4MB_M_debug
|
||||
monitor_filters = esp32_exception_decoder
|
||||
; RAM: [== ] 24.5% (used 80292 bytes from 327680 bytes)
|
||||
; Flash: [========= ] 94.5% (used 1487113 bytes from 1572864 bytes)
|
||||
; RAM: [== ] 24.1% (used 79060 bytes from 327680 bytes)
|
||||
; Flash: [==========] 99.3% (used 1561969 bytes from 1572864 bytes)
|
||||
|
||||
[env:esp32_16MB_M_debug]
|
||||
extends = esp32_4MB_M_base
|
||||
build_unflags = ${common.build_unflags}
|
||||
-D CORE_DEBUG_LEVEL=0
|
||||
-D NDEBUG
|
||||
build_flags = ${esp32_4MB_M_base.build_flags}
|
||||
${Debug_Flags.build_flags}
|
||||
; -D WLED_DEBUG_HEAP ;; WLEDMM enable heap debugging (needs newer framework versions)
|
||||
@@ -1407,8 +1406,8 @@ monitor_filters = esp32_exception_decoder
|
||||
board = esp32_16MB
|
||||
board_build.partitions = tools/WLED_ESP32_16MB.csv ;; WLED standard for 16MB flash: 2MB firmware, 12 MB filesystem
|
||||
;board_build.partitions = tools/WLED_ESP32_16MB_9MB_FS.csv ;; WLED extended for 16MB flash: 3.2MB firmware, 9 MB filesystem
|
||||
; RAM: [== ] 24.5% (used 80292 bytes from 327680 bytes)
|
||||
; Flash: [======= ] 70.9% (used 1487129 bytes from 2097152 bytes)
|
||||
; RAM: [== ] 24.3% (used 79468 bytes from 327680 bytes)
|
||||
; Flash: [======== ] 76.7% (used 1609205 bytes from 2097152 bytes)
|
||||
|
||||
[env:esp32_16MB_XL]
|
||||
extends = esp32_4MB_XL_base
|
||||
@@ -1417,9 +1416,9 @@ build_flags = ${esp32_4MB_XL_base.build_flags}
|
||||
board = esp32_16MB
|
||||
board_build.partitions = tools/WLED_ESP32_16MB.csv ;; WLED standard for 16MB flash: 2MB firmware, 12 MB filesystem
|
||||
;board_build.partitions = tools/WLED_ESP32_16MB_9MB_FS.csv ;; WLED extended for 16MB flash: 3.2MB firmware, 9 MB filesystem
|
||||
; RAM: [== ] 24.4% (used 79916 bytes from 327680 bytes)
|
||||
; Flash: [======= ] 67.0% (used 1405701 bytes from 2097152 bytes)
|
||||
;lib_ignore = IRremoteESP8266 ; use with WLED_DISABLE_INFRARED for faster compilation
|
||||
; RAM: [== ] 24.5% (used 80140 bytes from 327680 bytes)
|
||||
; Flash: [======== ] 77.8% (used 1631929 bytes from 2097152 bytes)
|
||||
|
||||
[env:esp32_16MB_M_eth]
|
||||
extends = esp32_4MB_M_base
|
||||
@@ -1430,8 +1429,8 @@ build_flags = ${esp32_4MB_M_base.build_flags}
|
||||
-D WLED_RELEASE_NAME=esp32_16MB_M_eth ; This will be included in the firmware.bin filename
|
||||
-D WLED_USE_ETHERNET
|
||||
-D WLED_DISABLE_ESPNOW ;; ESP-NOW requires wifi, may crash with ethernet only
|
||||
; RAM: [=== ] 26.1% (used 85452 bytes from 327680 bytes)
|
||||
; Flash: [======= ] 73.3% (used 1537945 bytes from 2097152 bytes)
|
||||
; RAM: [== ] 24.2% (used 79388 bytes from 327680 bytes)
|
||||
; Flash: [======= ] 73.8% (used 1548525 bytes from 2097152 bytes)
|
||||
|
||||
|
||||
[env:esp8266_2MB_S]
|
||||
@@ -1626,7 +1625,7 @@ lib_ignore = IRremoteESP8266 ; use with WLED_DISABLE_INFRARED for faster compila
|
||||
;; Warning: the build-in LittleFS (arduino-esp32 2.0.x) seems to be "slightly different" from Lorol LittleFS.
|
||||
;; When upgrading to the new framework, it might be necessary to first do a chip erase (make sure you have a backup of cfg.json and presets.json)
|
||||
|
||||
; compiled with ESP-IDF 4.4.1
|
||||
; compiled with ESP-IDF 4.4.1; HUB75 supported
|
||||
[env:esp32_4MB_V4_S]
|
||||
extends = esp32_4MB_V4_S_base
|
||||
build_flags = ${esp32_4MB_V4_S_base.esp32_build_flags}
|
||||
@@ -1644,12 +1643,11 @@ build_flags = ${esp32_4MB_V4_S_base.esp32_build_flags}
|
||||
; -D SR_DEBUG
|
||||
; -D MIC_LOGGER
|
||||
${common_mm.HUB75_build_flags}
|
||||
|
||||
lib_deps = ${esp32_4MB_V4_S_base.esp32_lib_deps}
|
||||
${common_mm.HUB75_lib_deps}
|
||||
lib_ignore = IRremoteESP8266 ; use with WLED_DISABLE_INFRARED for faster compilation
|
||||
; RAM: [=== ] 28.1% (used 91960 bytes from 327680 bytes)
|
||||
; Flash: [==========] 97.8% (used 1537777 bytes from 1572864 bytes)
|
||||
; RAM: [=== ] 25.5% (used 83400 bytes from 327680 bytes)
|
||||
; Flash: [==========] 97.3% (used 1530013 bytes from 1572864 bytes)
|
||||
|
||||
;; softhack007: my favourite HUB75 buildenv - fastest possible
|
||||
[env:esp32_4MB_V4_HUB75_forum]
|
||||
@@ -1697,7 +1695,6 @@ build_flags = ${esp32_4MB_V4_S_base.esp32_build_flags}
|
||||
-D WLEDMM_SAVE_FLASH
|
||||
-D WLED_DISABLE_BROWNOUT_DET
|
||||
;;-DCORE_DEBUG_LEVEL=1
|
||||
|
||||
lib_deps = ${esp32_4MB_V4_S_base.esp32_lib_deps}
|
||||
${common_mm.HUB75_lib_deps}
|
||||
${common_mm.animartrix_lib_deps}
|
||||
@@ -1707,7 +1704,8 @@ lib_ignore = IRremoteESP8266 ; use with WLED_DISABLE_INFRARED for faster compila
|
||||
board_build.partitions = ${esp32.big_partitions}
|
||||
board_build.f_flash = 80000000L ; use full 80MHz speed for flash (default = 40Mhz)
|
||||
board_build.flash_mode = qio ; (dio = dual i/o; more compatible than qio = quad i/o)
|
||||
|
||||
; RAM: [== ] 23.7% (used 77720 bytes from 327680 bytes)
|
||||
; Flash: [========= ] 93.1% (used 1768897 bytes from 1900544 bytes)
|
||||
|
||||
; compiled with ESP-IDF 4.4.1
|
||||
[env:esp32_4MB_V4_M]
|
||||
@@ -1731,11 +1729,10 @@ build_unflags = ${esp32_4MB_V4_M_base.build_unflags}
|
||||
-D USERMOD_ARTIFX
|
||||
-D USERMOD_AUTO_SAVE
|
||||
-D WLED_ENABLE_HUB75MATRIX
|
||||
; RAM: [=== ] 26.1% (used 85632 bytes from 327680 bytes)
|
||||
; Flash: [==========] 99.5% (used 1565065 bytes from 1572864 bytes)
|
||||
|
||||
;; RAM: [=== ] 28.0% (used 91664 bytes from 327680 bytes)
|
||||
;; Flash: [==========] 99.5% (used 1564945 bytes from 1572864 bytes)
|
||||
|
||||
;; V4 build for 16MB flash, optimized for speed
|
||||
;; V4 build for 16MB flash, optimized for speed; HUB75 supported
|
||||
[env:esp32_16MB_V4_S]
|
||||
extends = esp32_4MB_V4_S_base
|
||||
build_unflags = ${esp32_4MB_V4_S_base.build_unflags}
|
||||
@@ -1746,20 +1743,22 @@ build_flags = ${esp32_4MB_V4_S_base.esp32_build_flags}
|
||||
-D WLED_WATCHDOG_TIMEOUT=0 #-D WLED_DISABLE_BROWNOUT_DET
|
||||
-D ARDUINO_USB_CDC_ON_BOOT=0 ; needed for arduino-esp32 >=2.0.4; avoids errors on startup
|
||||
-D WLEDMM_FASTPATH ; WLEDMM experimental option. Reduces audio lag (latency), and allows for faster LED framerates. May break compatibility with previous versions.
|
||||
;; ${common_mm.animartrix_build_flags} ;; breaks the build - Internal Compiler Error
|
||||
-D WLED_DISABLE_BROWNOUT_DET
|
||||
-D JSON_BUFFER_SIZE=18432 -D MIN_HEAP_SIZE=6144
|
||||
-D MAX_SEGMENT_DATA=40960 ;; default 32767
|
||||
${common_mm.HUB75_build_flags}
|
||||
${common_mm.animartrix_build_flags}
|
||||
lib_deps = ${esp32_4MB_V4_S_base.esp32_lib_deps}
|
||||
;; ${common_mm.animartrix_lib_deps}
|
||||
${common_mm.HUB75_lib_deps}
|
||||
${common_mm.animartrix_lib_deps}
|
||||
board = esp32_16MB
|
||||
board_build.partitions = tools/WLED_ESP32_16MB.csv ;; WLED standard for 16MB flash: 2MB firmware, 12 MB filesystem
|
||||
;board_build.partitions = tools/WLED_ESP32_16MB_9MB_FS.csv ;; WLED extended for 16MB flash: 3.2MB firmware, 9 MB filesystem
|
||||
;; normal build
|
||||
; RAM: [=== ] 25.4% (used 83312 bytes from 327680 bytes)
|
||||
; Flash: [======= ] 73.3% (used 1536317 bytes from 2097152 bytes)
|
||||
;; optimized-for-speed build
|
||||
; RAM: [=== ] 26.1% (used 85396 bytes from 327680 bytes)
|
||||
; Flash: [======== ] 82.8% (used 1736129 bytes from 2097152 bytes)
|
||||
; RAM: [== ] 23.7% (used 77704 bytes from 327680 bytes)
|
||||
; Flash: [======== ] 84.4% (used 1770341 bytes from 2097152 bytes)
|
||||
|
||||
; compiled with ESP-IDF 4.4.1
|
||||
; compiled with ESP-IDF 4.4.1; HUB75 included (may have PIN conflicts)
|
||||
[env:esp32_16MB_V4_M]
|
||||
extends = esp32_4MB_V4_M_base
|
||||
build_flags = ${esp32_4MB_V4_M_base.esp32_build_flags}
|
||||
@@ -1773,17 +1772,22 @@ build_flags = ${esp32_4MB_V4_M_base.esp32_build_flags}
|
||||
-D ENCODER_DT_PIN=35 -D ENCODER_CLK_PIN=39 -D ENCODER_SW_PIN=5 ; WLEDMM spec by @SERG74: use 35 and 39 instead of 18 and 19 (conflicts)
|
||||
-D FLD_PIN_SCL=-1 -D FLD_PIN_SDA=-1 ; use global!
|
||||
-D HW_PIN_SCL=22 -D HW_PIN_SDA=21
|
||||
${common_mm.HUB75_build_flags}
|
||||
${common_mm.animartrix_build_flags}
|
||||
lib_deps = ${esp32_4MB_V4_M_base.esp32_lib_deps}
|
||||
${common_mm.HUB75_lib_deps}
|
||||
${common_mm.animartrix_lib_deps}
|
||||
board = esp32_16MB
|
||||
board_build.partitions = tools/WLED_ESP32_16MB.csv ;; WLED standard for 16MB flash: 2MB firmware, 12 MB filesystem
|
||||
;board_build.partitions = tools/WLED_ESP32_16MB_9MB_FS.csv ;; WLED extended for 16MB flash: 3.2MB firmware, 9 MB filesystem
|
||||
; RAM: [== ] 24.8% (used 81316 bytes from 327680 bytes)
|
||||
; Flash: [======= ] 72.9% (used 1528253 bytes from 2097152 bytes)
|
||||
; RAM: [=== ] 25.7% (used 84104 bytes from 327680 bytes)
|
||||
; Flash: [======== ] 80.7% (used 1692269 bytes from 2097152 bytes)
|
||||
|
||||
[env:esp32_16MB_V4_M_debug]
|
||||
extends = esp32_4MB_V4_M_base
|
||||
build_unflags = ${common.build_unflags}
|
||||
-D CORE_DEBUG_LEVEL=0
|
||||
-D NDEBUG
|
||||
build_flags = ${esp32_4MB_V4_M_base.esp32_build_flags}
|
||||
${Debug_Flags.build_flags}
|
||||
-D CORE_DEBUG_LEVEL=4 ;; 0=none, 1=error, 2=warning, 3=info, 4=debug, 5=verbose
|
||||
@@ -1796,16 +1800,24 @@ board = esp32_16MB
|
||||
board_build.partitions = tools/WLED_ESP32_16MB.csv ;; WLED standard for 16MB flash: 2MB firmware, 12 MB filesystem
|
||||
;board_build.partitions = tools/WLED_ESP32_16MB_9MB_FS.csv ;; WLED extended for 16MB flash: 3.2MB firmware, 9 MB filesystem
|
||||
monitor_filters = esp32_exception_decoder
|
||||
; RAM: [=== ] 25.0% (used 82008 bytes from 327680 bytes)
|
||||
; Flash: [======== ] 78.1% (used 1638193 bytes from 2097152 bytes) WLEDMM: Earlier 76.9
|
||||
; RAM: [=== ] 26.4% (used 86356 bytes from 327680 bytes)
|
||||
; Flash: [======== ] 83.6% (used 1753461 bytes from 2097152 bytes)
|
||||
|
||||
;; experimental environment for boards with PSRAM (needs ESP-IDF 4.4.1).
|
||||
;; experimental environment for boards with PSRAM (needs ESP-IDF 4.4.1). HUB75 included (may have PIN conflicts)
|
||||
[env:esp32_4MB_PSRAM_S]
|
||||
extends = esp32_4MB_V4_S_base
|
||||
board = lolin_d32_pro
|
||||
;board = esp32cam
|
||||
;board = ttgo-t7-v14-mini32
|
||||
board_build.partitions = ${esp32.extended_partitions}
|
||||
board_build.f_flash = 80000000L
|
||||
;board_build.flash_mode = dio
|
||||
|
||||
build_unflags = ${esp32_4MB_V4_S_base.build_unflags}
|
||||
-D WLED_ENABLE_HUB75MATRIX ;; uses too much flash
|
||||
-D WLED_ENABLE_DMX
|
||||
-D WLED_ENABLE_DMX_INPUT
|
||||
; -D WLED_ENABLE_HUB75MATRIX ;; uses a lot of flash
|
||||
; -D USERMOD_ANIMARTRIX ;; uses a lot of memory
|
||||
build_flags = ${esp32_4MB_V4_S_base.esp32_build_flags}
|
||||
-D WLED_RELEASE_NAME=esp32_4MB_PSRAM_S
|
||||
-D WLED_WATCHDOG_TIMEOUT=0 #-D WLED_DISABLE_BROWNOUT_DET
|
||||
@@ -1819,14 +1831,19 @@ build_flags = ${esp32_4MB_V4_S_base.esp32_build_flags}
|
||||
-D WLED_DISABLE_ALEXA ; RAM 116 bytes; FLASH 13524 bytes
|
||||
-D WLED_DISABLE_MQTT ; RAM 216 bytes; FLASH 16496 bytes
|
||||
-D WLED_DISABLE_INFRARED ;RAM 136 bytes; FLASH 24492 bytes ewowi: disabled to stay below 100%
|
||||
; -D WLED_ENABLE_DMX
|
||||
; -D WLED_DEBUG
|
||||
; -D SR_DEBUG
|
||||
; -D MIC_LOGGER
|
||||
${common_mm.HUB75_build_flags}
|
||||
lib_deps = ${esp32_4MB_V4_S_base.esp32_lib_deps}
|
||||
lib_ignore = IRremoteESP8266 ; use with WLED_DISABLE_INFRARED for faster compilation
|
||||
;; RAM: [== ] 20.4% (used 66960 bytes from 327680 bytes)
|
||||
;; Flash: [==========] 98.7% (used 1553129 bytes from 1572864 bytes)
|
||||
${common_mm.HUB75_lib_deps}
|
||||
lib_ignore =
|
||||
IRremoteESP8266 ; use with WLED_DISABLE_INFRARED for faster compilation
|
||||
;; ${common_mm.HUB75_lib_ignore}
|
||||
${common_mm.animartrix_lib_ignore}
|
||||
${common_mm.DMXin_lib_ignore}
|
||||
;; RAM: [== ] 17.8% (used 58236 bytes from 327680 bytes)
|
||||
;; Flash: [========= ] 90.0% (used 1534209 bytes from 1703936 bytes)
|
||||
|
||||
;; similar to 4MB_PSRAM_S, but optimized for WROVER-E (chip revision >= 3) that doesn't need any workarounds for PSRAM any more
|
||||
;; tl;dr: its faster on PSRAM. But it will not work on all boards.
|
||||
@@ -1834,13 +1851,16 @@ lib_ignore = IRremoteESP8266 ; use with WLED_DISABLE_INFRARED for faster compila
|
||||
extends = esp32_4MB_V4_S_base
|
||||
;board = esp32cam
|
||||
board = lolin_d32_pro
|
||||
;board_build.partitions = tools/WLED_ESP32_4MB_256KB_FS.csv ;; Alternative for 4MB flash: 1.8MB firmware, 256KB filesystem (esptool erase_flash needed before changing)
|
||||
;board = ttgo-t7-v14-mini32
|
||||
board_build.partitions = ${esp32.extended_partitions}
|
||||
board_build.f_flash = 80000000L
|
||||
board_build.flash_mode = dio
|
||||
|
||||
build_unflags = ${esp32_4MB_V4_S_base.build_unflags}
|
||||
;;${Speed_Flags.build_unflags} ;; to override -Os
|
||||
-DARDUINO_EVENT_RUNNING_CORE=1 ;; we want to run wifi on core0, so remove the standard flag
|
||||
-mfix-esp32-psram-cache-issue ;; this fix is not needed any more for revision 3
|
||||
-mfix-esp32-psram-cache-strategy=memw ;; same as above
|
||||
-D WLED_ENABLE_HUB75MATRIX ;; uses too much flash
|
||||
|
||||
build_flags = ${esp32_4MB_V4_S_base.esp32_build_flags}
|
||||
-DARDUINO_EVENT_RUNNING_CORE=0 ;; assign Wifi to core0, to have more CPU on core#1 (arduino loop)
|
||||
@@ -1858,49 +1878,29 @@ build_flags = ${esp32_4MB_V4_S_base.esp32_build_flags}
|
||||
-D WLED_DISABLE_LOXONE ; FLASH 1272 bytes
|
||||
-D WLED_DISABLE_HUESYNC ; RAM 122 bytes; FLASH 6308 bytes
|
||||
-D WLED_DISABLE_ALEXA ; RAM 116 bytes; FLASH 13524 bytes
|
||||
-D WLED_DISABLE_MQTT ; RAM 216 bytes; FLASH 16496 bytes
|
||||
; -D WLED_DISABLE_MQTT ; RAM 216 bytes; FLASH 16496 bytes
|
||||
-D WLED_DISABLE_INFRARED ;RAM 136 bytes; FLASH 24492 bytes ewowi: disabled to stay below 100%
|
||||
;-D WLED_DISABLE_ADALIGHT ;; To disable serial protocols (see upstream #3128)
|
||||
; -D WLED_ENABLE_DMX
|
||||
; -D WLED_DEBUG
|
||||
; -D SR_DEBUG
|
||||
; -D MIC_LOGGER
|
||||
${common_mm.HUB75_build_flags}
|
||||
lib_deps = ${esp32_4MB_V4_S_base.esp32_lib_deps}
|
||||
lib_ignore = IRremoteESP8266 ; use with WLED_DISABLE_INFRARED for faster compilation
|
||||
;; RAM: [== ] 20.4% (used 66976 bytes from 327680 bytes)
|
||||
;; Flash: [==========] 97.0% (used 1525833 bytes from 1572864 bytes)
|
||||
|
||||
;; PSRAM build env that only leaves 300Kb for filesystem (instead of 1MB), but adds 300kB for program space
|
||||
[env:esp32_4MB_PSRAM_M]
|
||||
extends = esp32_4MB_V4_M_base
|
||||
board = lolin_d32_pro
|
||||
;board = esp32cam
|
||||
board_build.partitions = tools/WLED_ESP32_4MB_256KB_FS.csv ;; 1.8MB firmware, 256KB filesystem (esptool erase_flash needed when changing from "standard WLED" partitions)
|
||||
build_flags = ${esp32_4MB_V4_M_base.esp32_build_flags}
|
||||
-D WLED_RELEASE_NAME=esp32_4MB_PSRAM_M
|
||||
-D WLED_WATCHDOG_TIMEOUT=0 #-D WLED_DISABLE_BROWNOUT_DET
|
||||
-D ARDUINO_USB_CDC_ON_BOOT=0 ; needed for arduino-esp32 >=2.0.4; avoids errors on startup
|
||||
-D WLEDMM_SAVE_FLASH
|
||||
-DBOARD_HAS_PSRAM ;; -D WLED_USE_PSRAM ;; WLED_USE_PSRAM causes major slow-down (slow LEDs) on some ESP32 boards
|
||||
-D WLED_USE_PSRAM_JSON -DALL_JSON_TO_PSRAM ; WLEDMM --> force all JSON stuff into PSRAM; gives more free heap
|
||||
-D WLED_DISABLE_LOXONE ;; FLASH 1272 bytes
|
||||
-D WLED_DISABLE_HUESYNC ;; RAM 122 bytes; FLASH 6308 bytes
|
||||
-D WLED_DISABLE_ALEXA ;; RAM 116 bytes; FLASH 13524 bytes
|
||||
; -D WLED_DISABLE_MQTT ;; RAM 216 bytes; FLASH 16496 bytes
|
||||
; -D WLED_DISABLE_INFRARED ;;RAM 136 bytes; FLASH 24492 bytes
|
||||
; -D WLED_ENABLE_DMX
|
||||
; -D WLED_DEBUG
|
||||
; -D SR_DEBUG
|
||||
; -D MIC_LOGGER
|
||||
lib_deps = ${esp32_4MB_V4_M_base.esp32_lib_deps}
|
||||
;lib_ignore = IRremoteESP8266 ; use with WLED_DISABLE_INFRARED for faster compilation
|
||||
;; RAM: [== ] 20.7% (used 67672 bytes from 327680 bytes)
|
||||
;; Flash: [========= ] 90.4% (used 1718421 bytes from 1900544 bytes)
|
||||
${common_mm.HUB75_lib_deps}
|
||||
lib_ignore =
|
||||
IRremoteESP8266 ; use with WLED_DISABLE_INFRARED for faster compilation
|
||||
${common_mm.animartrix_lib_ignore}
|
||||
;; ${common_mm.HUB75_lib_ignore}
|
||||
;; RAM: [== ] 18.0% (used 58920 bytes from 327680 bytes)
|
||||
;; Flash: [========= ] 90.6% (used 1542929 bytes from 1703936 bytes)
|
||||
|
||||
|
||||
# ------------------------------------------------------------------------------
|
||||
# esp32-S3 environments
|
||||
# ------------------------------------------------------------------------------
|
||||
|
||||
|
||||
[env:esp32S3_4MB_S] ;; Use for HD-WF2
|
||||
extends = esp32_4MB_V4_M_base
|
||||
board = esp32-s3-devkitc-1
|
||||
@@ -1982,6 +1982,7 @@ board_build.flash_mode = qio
|
||||
; Flash: [======= ] 70.6% (used 1479573 bytes from 2097152 bytes)
|
||||
|
||||
;; MM for ESP32-S3 PSRAM development board, with 8MB FLASH and >= 8MB PSRAM (memory_type: qio_opi)
|
||||
;; HUB75 supported, but may still hve pin conflicts
|
||||
[env:esp32S3_8MB_PSRAM_M]
|
||||
extends = esp32_4MB_V4_M_base
|
||||
|
||||
@@ -2020,14 +2021,13 @@ build_flags = ${common.build_flags} ${esp32s3.build_flags} -Wno-misleading-inden
|
||||
; -D MIC_LOGGER
|
||||
lib_deps = ${esp32s3.lib_deps} ${common_mm.lib_deps_S} ${common_mm.lib_deps_V4_M}
|
||||
${common_mm.HUB75_lib_deps}
|
||||
|
||||
;lib_ignore = IRremoteESP8266 ; use with WLED_DISABLE_INFRARED for faster compilation
|
||||
board_build.partitions = tools/WLED_ESP32_8MB.csv
|
||||
; RAM: [== ] 21.1% (used 69156 bytes from 327680 bytes)
|
||||
; Flash: [======== ] 75.9% (used 1591817 bytes from 2097152 bytes)
|
||||
|
||||
;; MM for ESP32-S3 boards - FASTPATH + optimize for speed
|
||||
[env:esp32S3_8MB_S]
|
||||
;; MM for ESP32-S3 boards - FASTPATH + optimize for speed; ; HUB75 support included (may still have pin conflicts)
|
||||
extends = esp32_4MB_V4_M_base
|
||||
board = esp32-s3-devkitc-1 ;; generic S3 dev board
|
||||
board_build.flash_mode = qio ;; use "dio" if your board gets unstable with "qio"
|
||||
@@ -2041,6 +2041,7 @@ build_flags = ${common.build_flags} ${esp32s3.build_flags} -Wno-misleading-inden
|
||||
;;-D WLED_DISABLE_ADALIGHT ;; disables serial protocols - recommended for Hardware-CDC USB (Serial RX will receive junk commands when RX pin is unconnected, unless its pulled down by resistor)
|
||||
${Speed_Flags.build_flags_V4} ;; optimize for speed instead of size
|
||||
-D WLEDMM_FASTPATH ; WLEDMM experimental option. Reduces audio lag (latency), and allows for faster LED framerates. May break compatibility with previous versions.
|
||||
${common_mm.HUB75_build_flags}
|
||||
${common_mm.animartrix_build_flags}
|
||||
-D WLED_WATCHDOG_TIMEOUT=0 -D CONFIG_ASYNC_TCP_USE_WDT=0
|
||||
-D WLED_DISABLE_LOXONE ; FLASH 1272 bytes
|
||||
@@ -2062,15 +2063,13 @@ build_flags = ${common.build_flags} ${esp32s3.build_flags} -Wno-misleading-inden
|
||||
; -D SR_DEBUG
|
||||
; -D MIC_LOGGER
|
||||
lib_deps = ${esp32s3.lib_deps} ${common_mm.lib_deps_S}
|
||||
${common_mm.HUB75_lib_deps}
|
||||
${common_mm.animartrix_lib_deps}
|
||||
lib_ignore = IRremoteESP8266 ; use with WLED_DISABLE_INFRARED for faster compilation
|
||||
board_build.partitions = tools/WLED_ESP32_8MB.csv
|
||||
;; normal build
|
||||
; RAM: [== ] 24.9% (used 81656 bytes from 327680 bytes)
|
||||
; Flash: [======= ] 66.1% (used 1386229 bytes from 2097152 bytes)
|
||||
;; optimized-for-speed build
|
||||
; RAM: [=== ] 25.8% (used 84544 bytes from 327680 bytes)
|
||||
; Flash: [======== ] 78.1% (used 1638737 bytes from 2097152 bytes)
|
||||
; RAM: [=== ] 26.0% (used 85328 bytes from 327680 bytes)
|
||||
; Flash: [======== ] 79.9% (used 1674885 bytes from 2097152 bytes)
|
||||
|
||||
|
||||
;; for S3 with 16MB flash, octal PSRAM,
|
||||
|
||||
Reference in New Issue
Block a user