Backup RFP Infinity controller state before Resolume changes

platformio.ini

@@ -2441,7 +2441,14 @@ extends = env:esp32S3_8MB_PSRAM_M_opi
 
 [env:rfp_esp32s3_wroom1_n16r8_3x106]
 ;; RFP ESP32-S3 WROOM-1 N16R8, 16MB flash / 8MB OPI PSRAM, 3 outputs x 106 pixels
+;; Flash: QIO / 16MB, PSRAM: OPI / 8MB octal.
+;; USB CDC on boot is inherited disabled for stable standalone boot after real power-on.
 extends = env:esp32S3_8MB_PSRAM_M_opi
+board_build.f_cpu = 240000000L
+board_build.f_flash = 80000000L
+board_build.flash_mode = qio
+board_build.arduino.memory_type = qio_opi
+board_build.psram_type = opi
 board_upload.flash_size = 16MB
 board_upload.maximum_size = 16777216
 board_build.partitions = tools/WLED_ESP32_16MB.csv
@@ -2453,7 +2460,14 @@ build_unflags = ${env:esp32S3_8MB_PSRAM_M_opi.build_unflags}
   -D IRPIN=-1
   -D AUDIOPIN=-1
 build_flags = ${env:esp32S3_8MB_PSRAM_M_opi.build_flags}
-  -D WLED_RELEASE_NAME=RFP_ESP32S3_N16R8_3x106
+  -D WLED_RELEASE_NAME=RFP_N16R8_NODE3x106_V20260511E
+  -D CLIENT_SSID=\"RFPLicht\"
+  -D CLIENT_PASS=\"0506feier\"
+  -D WLED_ENABLE_INFINITY_CONTROLLER
+  -D WLED_INFINITY_NODE
+  -D WLEDMM_FORCE_ON_AT_BOOT
+  -D WLED_BOOTUPDELAY=1200
+  -D WLED_DISABLE_INFRARED
   -D LEDPIN=4
   -D DATA_PINS=4,5,6
   -D PIXEL_COUNTS=106,106,106
@@ -2465,6 +2479,54 @@ build_flags = ${env:esp32S3_8MB_PSRAM_M_opi.build_flags}
   -D IRPIN=-1
   -D AUDIOPIN=-1
 
+[env:rfp_esp32s3_wroom1_n16r8_master]
+;; RFP Infinity master controller, ESP32-S3-WROOM-1 N16R8.
+;; Flash: QIO / 16MB, PSRAM: OPI / 8MB octal.
+;; USB CDC on boot stays disabled for stable standalone boot after real power-on.
+extends = env:esp32S3_8MB_PSRAM_M_opi
+board_build.f_cpu = 240000000L
+board_build.f_flash = 80000000L
+board_build.flash_mode = qio
+board_build.arduino.memory_type = qio_opi
+board_build.psram_type = opi
+board_upload.flash_size = 16MB
+board_upload.maximum_size = 16777216
+board_build.partitions = tools/WLED_ESP32_16MB.csv
+build_unflags = ${env:esp32S3_8MB_PSRAM_M_opi.build_unflags}
+  -D WLED_RELEASE_NAME=esp32S3_8MB_PSRAM_M_opi
+  -D LEDPIN=21
+  -D BTNPIN=0
+  -D RLYPIN=1
+  -D IRPIN=-1
+  -D AUDIOPIN=-1
+build_flags = ${env:esp32S3_8MB_PSRAM_M_opi.build_flags}
+  -D WLED_RELEASE_NAME=RFP_N16R8_MASTER_V20260511E
+  -D CLIENT_SSID=\"RFPLicht\"
+  -D CLIENT_PASS=\"0506feier\"
+  -D WLED_ENABLE_INFINITY_CONTROLLER
+  -D WLED_INFINITY_MASTER
+  -D WLED_ENABLE_DMX_INPUT
+  -D WLEDMM_FORCE_ON_AT_BOOT
+  -D WLED_BOOTUPDELAY=1200
+  -D WLED_DISABLE_INFRARED
+  -D LEDPIN=21
+  -D DATA_PINS=21
+  -D PIXEL_COUNTS=1
+  -D DEFAULT_LED_COUNT=1
+  -D STATUSPIXELPIN=48
+  -D STATUSPIXELCOLORORDER=COL_ORDER_GRB
+  -D BTNPIN=-1
+  -D RLYPIN=-1
+  -D IRPIN=-1
+  -D AUDIOPIN=-1
+  -D DMX_INPUT_RXPIN=16
+  -D DMX_INPUT_TXPIN=17
+  -D DMX_INPUT_ENABLEPIN=18
+  -D DMX_INPUT_PORT=2
+  -D DEFAULT_DMX_MODE=DMX_MODE_INFINITY
+lib_deps = ${env:esp32S3_8MB_PSRAM_M_opi.lib_deps}
+  ${common_mm.DMXin_lib_deps}
+
 [env:esp32S3_8MB_S]
 ;; MM for ESP32-S3 boards - FASTPATH + optimize for speed; ; HUB75 support included (may still have pin conflicts)
 extends = esp32_4MB_V4_M_base