Backup RFP Infinity controller state before Resolume changes

flash_node.sh

@@ -0,0 +1,69 @@
+#!/usr/bin/env bash
+set -Eeuo pipefail
+
+cd /home/jan/Documents/RFP/WLED-MM/repo
+
+ENV="rfp_esp32s3_wroom1_n16r8_3x106"
+
+export PATH="/home/jan/Documents/RFP/Finanz_App/node/current/bin:$PATH"
+export NPM_CONFIG_CACHE="$PWD/.npm-cache"
+export PLATFORMIO_CORE_DIR="$PWD/.piohome"
+export PLATFORMIO_PACKAGES_DIR="$PWD/.piohome/packages"
+export PLATFORMIO_PLATFORMS_DIR="$PWD/.piohome/platforms"
+export PLATFORMIO_CACHE_DIR="$PWD/.piohome/.cache"
+export PLATFORMIO_BUILD_CACHE_DIR="$PWD/.piohome/buildcache"
+
+pio() {
+  .venv/bin/python -m platformio "$@"
+}
+
+echo "=== RFP NODE FLASH ==="
+echo "Env: $ENV"
+echo
+
+sudo systemctl stop ModemManager 2>/dev/null || true
+
+PORT="$(ls /dev/ttyACM* /dev/ttyUSB* 2>/dev/null | head -n1 || true)"
+
+if [[ -z "$PORT" ]]; then
+  echo "FEHLER: Kein ESP32-Port gefunden."
+  echo "Board einstecken oder BOOT gedrueckt halten -> RESET kurz druecken -> BOOT loslassen."
+  echo "Dann erneut starten: ./flash_node.sh"
+  exit 1
+fi
+
+echo "Port: $PORT"
+echo
+
+echo "1/5 Flash komplett loeschen..."
+.venv/bin/python .piohome/packages/tool-esptoolpy/esptool.py \
+  --chip esp32s3 \
+  --port "$PORT" \
+  erase_flash
+
+echo
+echo "2/5 Clean..."
+pio run -e "$ENV" -t clean
+
+echo
+echo "3/5 Firmware bauen..."
+pio run -e "$ENV"
+
+echo
+echo "4/5 Firmware flashen..."
+pio run -e "$ENV" -t upload --upload-port "$PORT"
+
+echo
+echo "5/5 Filesystem/LittleFS flashen..."
+if ! pio run -e "$ENV" -t uploadfs --upload-port "$PORT"; then
+  echo
+  echo "WARNUNG: uploadfs fehlgeschlagen oder nicht konfiguriert."
+  echo "WLED kann trotzdem starten, aber Web-/Filesystem-Daten koennen fehlen."
+fi
+
+echo
+echo "Node-Flash fertig."
+echo "Starte Monitor. Mit Ctrl+C beenden."
+echo
+
+pio device monitor -e "$ENV" --port "$PORT" -b 115200