Merge pull request #4492 from Aircoookie/V4

V4

platformio.ini

@@ -422,8 +422,10 @@ lib_depsV4 =
 ;;
 ;; please note that you can NOT update existing ESP32 installs with a "V4" build. Also updating by OTA will not work properly.
 ;; You need to completely erase your device (esptool erase_flash) first, then install the "V4" build from VSCode+platformio.
-platform = espressif32@ ~6.3.2
-platform_packages = platformio/framework-arduinoespressif32 @ 3.20009.0    ;; select arduino-esp32 v2.0.9 (arduino-esp32 2.0.10 thru 2.0.14 are buggy so avoid them)
+
+;; select arduino-esp32 v2.0.9 (arduino-esp32 2.0.10 thru 2.0.14 are buggy so avoid them)
+platform = https://github.com/tasmota/platform-espressif32/releases/download/2023.06.02/platform-espressif32.zip ;; Tasmota Arduino Core 2.0.9 with IPv6 support, based on IDF 4.4.4
+build_unflags = ${common.build_unflags}
 build_flags = -g
   -Wshadow=compatible-local ;; emit warning in case a local variable "shadows" another local one
   -DARDUINO_ARCH_ESP32 -DESP32
@@ -470,8 +472,8 @@ lib_deps =
 
 [esp32c3]
 ;; generic definitions for all ESP32-C3 boards
-platform = espressif32@ ~6.3.2
-platform_packages = platformio/framework-arduinoespressif32 @ 3.20009.0    ;; select arduino-esp32 v2.0.9 (arduino-esp32 2.0.10 thru 2.0.14 are buggy so avoid them)
+platform = ${esp32_idf_V4.platform}
+build_unflags = ${common.build_unflags}
 build_flags = -g
   -DARDUINO_ARCH_ESP32 -DESP32                     ;; WLEDMM
   -DARDUINO_ARCH_ESP32C3
@@ -492,8 +494,8 @@ lib_deps =
 
 [esp32s3]
 ;; generic definitions for all ESP32-S3 boards
-platform = espressif32@ ~6.3.2
-platform_packages = platformio/framework-arduinoespressif32 @ 3.20009.0    ;; select arduino-esp32 v2.0.9 (arduino-esp32 2.0.10 thru 2.0.14 are buggy so avoid them)
+platform = ${esp32_idf_V4.platform}
+build_unflags = ${common.build_unflags}
 build_flags = -g
   -DESP32
   -DARDUINO_ARCH_ESP32
@@ -611,21 +613,6 @@ lib_deps = ${esp32.lib_deps}
 monitor_filters = esp32_exception_decoder
 board_build.partitions = ${esp32.default_partitions}
 
-;WLEDMM: use WLEDMM build environments
-; [env:esp32dev_audioreactive]
-; board = esp32dev
-; platform = ${esp32.platform}
-; platform_packages = ${esp32.platform_packages}
-; build_unflags = ${common.build_unflags}
-; build_flags = ${common.build_flags_esp32} -D WLED_RELEASE_NAME=ESP32_audioreactive #-D WLED_DISABLE_BROWNOUT_DET
-;   ${esp32.AR_build_flags}
-; lib_deps = ${esp32.lib_deps}
-;   ${esp32.AR_lib_deps}
-; monitor_filters = esp32_exception_decoder
-; board_build.partitions = ${esp32.default_partitions}
-; ; board_build.f_flash = 80000000L
-; ; board_build.flash_mode = dio
-
 [env:esp32dev_qio80]
 board = esp32dev
 platform = ${esp32.platform}
@@ -644,7 +631,6 @@ board_build.flash_mode = qio
 ;; please erase your device before installing.
 board = esp32dev
 platform = ${esp32_idf_V4.platform}
-platform_packages = ${esp32_idf_V4.platform_packages}
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags}  ${esp32_idf_V4.build_flags} -D WLED_RELEASE_NAME=ESP32_V4_qio80 #-D WLED_DISABLE_BROWNOUT_DET
 lib_deps = ${esp32_idf_V4.lib_deps}
@@ -698,7 +684,6 @@ lib_deps = ${esp32s2.lib_deps}
 [env:esp32c3dev]
 extends = esp32c3
 platform = ${esp32c3.platform}
-platform_packages = ${esp32c3.platform_packages}
 framework = arduino
 board = esp32-c3-devkitm-1
 board_build.partitions = ${esp32.default_partitions}
@@ -710,12 +695,12 @@ build_flags = ${common.build_flags} ${esp32c3.build_flags} -D WLED_RELEASE_NAME=
 upload_speed = 460800
 build_unflags = ${common.build_unflags}
 lib_deps = ${esp32c3.lib_deps}
+board_build.flash_mode = qio
 
 [env:esp32s3dev_8MB]
 ;; ESP32-S3-DevKitC-1 development board, with 8MB FLASH, no PSRAM (flash_mode: qio)
 board = esp32-s3-devkitc-1
 platform = ${esp32s3.platform}
-platform_packages = ${esp32s3.platform_packages}
 upload_speed = 921600 ; or  460800
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} ${esp32s3.build_flags} -D WLED_RELEASE_NAME=ESP32-S3_8MB
@@ -736,7 +721,6 @@ monitor_filters = esp32_exception_decoder
 board = esp32-s3-devkitc-1 ;; generic dev board; the next line adds PSRAM support
 board_build.arduino.memory_type = qio_opi     ;; use with PSRAM: 8MB or 16MB
 platform = ${esp32s3.platform}
-platform_packages = ${esp32s3.platform_packages}
 upload_speed = 921600
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} ${esp32s3.build_flags}
@@ -829,7 +813,6 @@ lib_deps = ${esp8266.lib_deps}
 
 [env:lolin_s2_mini]
 platform = ${esp32s2.platform}
-platform_packages = ${esp32s2.platform_packages}
 board = lolin_s2_mini
 board_build.partitions = ${esp32.default_partitions}
 build_unflags = ${common.build_unflags} #-DARDUINO_USB_CDC_ON_BOOT=1
@@ -867,7 +850,6 @@ lib_deps = ${esp32s2.lib_deps}
 ;; this board need a specific partition file. OTA not possible.
 extends = esp32c3
 platform = ${esp32c3.platform}
-platform_packages = ${esp32c3.platform_packages}
 board = esp32-c3-devkitm-1
 build_flags = ${common.build_flags} ${esp32c3.build_flags} #-D WLED_RELEASE_NAME=ESP32-C3
   -D WLED_WATCHDOG_TIMEOUT=0