cleanup for esp32 4MB buildenvs
This commit is contained in:
Frank
101
platformio.ini
101
platformio.ini
@@ -73,9 +73,10 @@ default_envs =
|
||||
; wemos_shield_esp32_16MB_SPM1423_XL
|
||||
; wemos_shield_esp32_16MB_LineIn_M
|
||||
;;
|
||||
esp32_4MB_V4_M ;; esp32 4MB standard - HUB75 not included
|
||||
esp32dev_compat ;; legacy
|
||||
esp32_pico_4MB_V4_S ;; PICO D4 board
|
||||
esp32_4MB_V4_S ;; esp32 4MB - HUB75 supported
|
||||
esp32_4MB_V4_S_HUB75 ;; esp32 4MB - HUB75 supported
|
||||
esp32_4MB_V4_HUB75_forum ;; esp32 4MB - HUB75 supported (forum pinout)
|
||||
esp32_4MB_M_eth ;; esp32 4MB with ethernet support
|
||||
; esp32_4MB_PSRAM_REV3_S ;; WROVER-E experimental, optimized for WROVER-E with "revision3" chip
|
||||
@@ -1811,14 +1812,14 @@ lib_ignore = ${esp8266.lib_ignore}
|
||||
;; Warning: the build-in LittleFS (arduino-esp32 2.0.x) seems to be "slightly different" from Lorol LittleFS.
|
||||
;; When upgrading to the new framework, it might be necessary to first do a chip erase (make sure you have a backup of cfg.json and presets.json)
|
||||
|
||||
; compiled with ESP-IDF 4.4.1; HUB75 supported
|
||||
[env:esp32_4MB_V4_S]
|
||||
; compiled with ESP-IDF 4.4.1; HUB75 supported, OTA compatible with upstream
|
||||
[env:esp32_4MB_V4_S_HUB75]
|
||||
extends = esp32_4MB_V4_S_base
|
||||
board_build.partitions = ${esp32.default_partitions} ;; compatible with upstream
|
||||
build_unflags = ${esp32_4MB_V4_S_base.build_unflags}
|
||||
${common_mm.DMXin_build_flags} ;; exceeds flash size limits
|
||||
build_flags = ${esp32_4MB_V4_S_base.esp32_build_flags}
|
||||
-D WLED_RELEASE_NAME=esp32_4MB_V4_S
|
||||
-D WLED_RELEASE_NAME=esp32_4MB_V4_S_HUB75
|
||||
-D WLED_WATCHDOG_TIMEOUT=0 #-D WLED_DISABLE_BROWNOUT_DET
|
||||
-D ARDUINO_USB_CDC_ON_BOOT=0 ; needed for arduino-esp32 >=2.0.4; avoids errors on startup
|
||||
-D WLEDMM_FASTPATH ; WLEDMM experimental option. Reduces audio lag (latency), and allows for faster LED framerates. May break compatibility with previous versions.
|
||||
@@ -1829,6 +1830,8 @@ build_flags = ${esp32_4MB_V4_S_base.esp32_build_flags}
|
||||
-D WLED_DISABLE_MQTT
|
||||
-D WLED_DISABLE_INFRARED
|
||||
-D WLED_DISABLE_ESPNOW ;; might help in case of WiFi connectivity problems
|
||||
-D WLED_ENABLE_PIXELFORGE
|
||||
-D WLEDMM_SAVE_FLASH
|
||||
; -D WLED_DEBUG
|
||||
; -D SR_DEBUG
|
||||
; -D MIC_LOGGER
|
||||
@@ -1840,8 +1843,45 @@ lib_deps = ${esp32_4MB_V4_S_base.esp32_lib_deps}
|
||||
${common_mm.HUB75_lib_deps}
|
||||
lib_ignore = IRremoteESP8266 ; use with WLED_DISABLE_INFRARED for faster compilation
|
||||
${common_mm.DMXin_lib_ignore}
|
||||
; RAM: [=== ] 25.3% (used 83052 bytes from 327680 bytes)
|
||||
; Flash: [==========] 98.2% (used 1544273 bytes from 1572864 bytes)
|
||||
; RAM: [=== ] 25.5% (used 83396 bytes from 327680 bytes)
|
||||
; Flash: [==========] 98.2% (used 1543949 bytes from 1572864 bytes)
|
||||
|
||||
[env:esp32_4MB_V4_S] ;; legacy alias
|
||||
extends = env:esp32_4MB_V4_S_HUB75
|
||||
|
||||
; standard MM build for classic esp32; HUB75 not included
|
||||
[env:esp32_4MB_V4_M]
|
||||
extends = esp32_4MB_V4_M_base
|
||||
;; needs tasmota framework; will exceed flash limits with default framework
|
||||
platform = ${esp32.platform} ;; "V4" tasmota
|
||||
platform_packages = ${esp32.platform_packages}
|
||||
build_flags = ${esp32_4MB_V4_M_base.esp32_build_flags}
|
||||
-D WLED_RELEASE_NAME=esp32_4MB_V4_M
|
||||
-D WLED_WATCHDOG_TIMEOUT=0 #-D WLED_DISABLE_BROWNOUT_DET
|
||||
-D ARDUINO_USB_CDC_ON_BOOT=0 ; needed for arduino-esp32 >=2.0.4; avoids errors on startup
|
||||
-D WLED_ENABLE_PIXELFORGE
|
||||
;;-D WLEDMM_SAVE_FLASH
|
||||
;;-D WLED_DISABLE_PARTICLESYSTEM1D ;; may exceed flash size limit
|
||||
;;-D WLED_DISABLE_PARTICLESYSTEM2D ;; may exceed flash size limit
|
||||
lib_deps = ${esp32_4MB_V4_M_base.esp32_lib_deps}
|
||||
lib_ignore =
|
||||
IRremoteESP8266 ; use with WLED_DISABLE_INFRARED for faster compilation
|
||||
${common_mm.HUB75_lib_ignore} ;; over the flash size limit
|
||||
;;${common_mm.animartrix_lib_ignore}
|
||||
build_unflags = ${esp32_4MB_V4_M_base.build_unflags}
|
||||
${common_mm.HUB75_build_flags} ;; over the flash size limit
|
||||
;;-D USERMOD_ANIMARTRIX ;; Tips our memory usage over the limit
|
||||
;; -D USERMOD_ARTIFX
|
||||
;; -D USERMOD_AUTO_SAVE
|
||||
;; -D WLED_ENABLE_HUB75MATRIX
|
||||
-D WLED_DISABLE_ADALIGHT
|
||||
-D WLED_DISABLE_LOXONE ; FLASH 1272 bytes
|
||||
-D WLED_DISABLE_ALEXA ; RAM 116 bytes; FLASH 13524 bytes
|
||||
-D WLED_DISABLE_HUESYNC ;RAM 122 bytes; FLASH 6308 bytes
|
||||
-D WLED_DISABLE_MQTT ; RAM 216 bytes; FLASH 16496 bytes
|
||||
;;-D WLED_DISABLE_INFRARED ;RAM 136 bytes; FLASH 24492 bytes
|
||||
; RAM: [== ] 24.3% (used 79660 bytes from 327680 bytes)
|
||||
; Flash: [========= ] 87.7% (used 1494213 bytes from 1703936 bytes)
|
||||
|
||||
[env:esp32_4MB_V4_S_eth]
|
||||
extends = esp32_4MB_V4_S_base
|
||||
@@ -1858,6 +1898,7 @@ build_flags = ${esp32_4MB_V4_S_base.esp32_build_flags}
|
||||
-D WLED_DISABLE_HUESYNC
|
||||
-D WLED_DISABLE_MQTT
|
||||
-D WLED_DISABLE_INFRARED
|
||||
-D WLED_ENABLE_PIXELFORGE
|
||||
; -D WLED_DEBUG
|
||||
; -D SR_DEBUG
|
||||
; -D MIC_LOGGER
|
||||
@@ -1870,6 +1911,8 @@ build_flags = ${esp32_4MB_V4_S_base.esp32_build_flags}
|
||||
lib_deps = ${esp32_4MB_V4_S_base.esp32_lib_deps}
|
||||
${common_mm.HUB75_lib_deps}
|
||||
lib_ignore = IRremoteESP8266 ; use with WLED_DISABLE_INFRARED for faster compilation
|
||||
; RAM: [=== ] 25.6% (used 84048 bytes from 327680 bytes)
|
||||
; Flash: [==========] 96.1% (used 1637085 bytes from 1703936 bytes)
|
||||
|
||||
;; softhack007: my favourite HUB75 buildenv - fastest possible
|
||||
[env:esp32_4MB_V4_HUB75_forum]
|
||||
@@ -1903,6 +1946,7 @@ build_flags = ${esp32_4MB_V4_S_base.esp32_build_flags}
|
||||
-D WLED_DISABLE_INFRARED
|
||||
-D WLED_DISABLE_ADALIGHT
|
||||
-D WLED_ENABLE_FULL_FONTS ;; increases firmware size by 6848 bytes
|
||||
-D WLED_ENABLE_PIXELFORGE
|
||||
;; -D WLED_DEBUG
|
||||
;; -D SR_DEBUG
|
||||
-D WLED_BOOTUPDELAY=350
|
||||
@@ -1910,7 +1954,7 @@ build_flags = ${esp32_4MB_V4_S_base.esp32_build_flags}
|
||||
-DESP32_FORUM_PINOUT
|
||||
-D SR_DMTYPE=254 ;; HUB75 driver needs the I2S unit - set AR default mode to 'Network Receive Only' to prevent driver conflicts.
|
||||
${common_mm.animartrix_build_flags}
|
||||
;;-DARDUINO_EVENT_RUNNING_CORE=0 ;; assign Wifi to core0, to have more CPU on core#1 (arduino loop)
|
||||
-DARDUINO_EVENT_RUNNING_CORE=0 ;; assign Wifi to core0, to have more CPU on core#1 (arduino loop)
|
||||
;;-DARDUINO_RUNNING_CORE=1 ;; should be default, but does not hurt
|
||||
-DCONFIG_MBEDTLS_DYNAMIC_BUFFER=1 ;; optional - seems to move more buffers into PSRAM
|
||||
;; -D CONFIG_ESP32_REV_MIN=3 ;; disables PSRAM bug workarounds in the core, reducing the code size and improving overall performance.
|
||||
@@ -1928,38 +1972,8 @@ lib_ignore = IRremoteESP8266 ; use with WLED_DISABLE_INFRARED for faster compila
|
||||
board_build.partitions = ${esp32.big_partitions}
|
||||
board_build.f_flash = 80000000L ; use full 80MHz speed for flash (default = 40Mhz)
|
||||
board_build.flash_mode = qio ; (dio = dual i/o; more compatible than qio = quad i/o)
|
||||
; RAM: [== ] 23.7% (used 77720 bytes from 327680 bytes)
|
||||
; Flash: [========= ] 93.1% (used 1768897 bytes from 1900544 bytes)
|
||||
|
||||
; compiled with ESP-IDF 4.4.1
|
||||
[env:esp32_4MB_V4_M]
|
||||
extends = esp32_4MB_V4_M_base
|
||||
;; needs tasmota framework; will exceed flash limits with default framework
|
||||
platform = ${esp32.platform} ;; "V4" tasmota
|
||||
platform_packages = ${esp32.platform_packages}
|
||||
build_flags = ${esp32_4MB_V4_M_base.esp32_build_flags}
|
||||
-D WLED_RELEASE_NAME=esp32_4MB_V4_M
|
||||
-D WLED_WATCHDOG_TIMEOUT=0 #-D WLED_DISABLE_BROWNOUT_DET
|
||||
-D ARDUINO_USB_CDC_ON_BOOT=0 ; needed for arduino-esp32 >=2.0.4; avoids errors on startup
|
||||
;;-D WLED_DISABLE_LOXONE ; FLASH 1272 bytes
|
||||
;;-D WLED_DISABLE_ALEXA ; RAM 116 bytes; FLASH 13524 bytes
|
||||
;;-D WLED_DISABLE_HUESYNC ;RAM 122 bytes; FLASH 6308 bytes
|
||||
;;-D WLED_DISABLE_MQTT ; RAM 216 bytes; FLASH 16496 bytes ;; softhack007 disabled to stay below 100% flash size
|
||||
-D WLED_DISABLE_INFRARED ;RAM 136 bytes; FLASH 24492 bytes ;; softhack007 disabled to stay below 100% flash size
|
||||
;;-D WLEDMM_SAVE_FLASH
|
||||
;;-D WLED_DISABLE_PARTICLESYSTEM1D ;; exceeds flash size limit
|
||||
;;-D WLED_DISABLE_PARTICLESYSTEM2D ;; exceeds flash size limit
|
||||
lib_deps = ${esp32_4MB_V4_M_base.esp32_lib_deps}
|
||||
lib_ignore = IRremoteESP8266 ; use with WLED_DISABLE_INFRARED for faster compilation
|
||||
${common_mm.HUB75_lib_ignore} ;; over the flash size limit
|
||||
${common_mm.animartrix_lib_ignore}
|
||||
build_unflags = ${esp32_4MB_V4_M_base.build_unflags}
|
||||
-D USERMOD_ANIMARTRIX ;; Tips our memory usage over the limit
|
||||
-D USERMOD_ARTIFX
|
||||
;; -D USERMOD_AUTO_SAVE
|
||||
-D WLED_ENABLE_HUB75MATRIX
|
||||
; RAM: [== ] 23.9% (used 78204 bytes from 327680 bytes)
|
||||
; Flash: [========= ] 85.8% (used 1349585 bytes from 1572864 bytes)
|
||||
; RAM: [== ] 23.9% (used 78400 bytes from 327680 bytes)
|
||||
; Flash: [==========] 98.1% (used 1863653 bytes from 1900544 bytes)
|
||||
|
||||
;; V4 build for 16MB flash, optimized for speed; HUB75 supported
|
||||
[env:esp32_16MB_V4_S]
|
||||
@@ -2071,6 +2085,7 @@ build_flags = ${esp32_4MB_V4_S_base.esp32_build_flags}
|
||||
-D WLED_DISABLE_ALEXA ; RAM 116 bytes; FLASH 13524 bytes
|
||||
-D WLED_DISABLE_MQTT ; RAM 216 bytes; FLASH 16496 bytes
|
||||
-D WLED_DISABLE_INFRARED ;RAM 136 bytes; FLASH 24492 bytes ewowi: disabled to stay below 100%
|
||||
-D WLED_ENABLE_PIXELFORGE
|
||||
; -D WLED_DEBUG
|
||||
; -D SR_DEBUG
|
||||
; -D MIC_LOGGER
|
||||
@@ -2083,8 +2098,8 @@ lib_ignore =
|
||||
;; ${common_mm.HUB75_lib_ignore}
|
||||
${common_mm.animartrix_lib_ignore}
|
||||
${common_mm.DMXin_lib_ignore}
|
||||
;; RAM: [== ] 15.5% (used 50664 bytes from 327680 bytes)
|
||||
;; Flash: [======== ] 75.7% (used 1289229 bytes from 1703936 bytes)
|
||||
;; RAM: [== ] 18.0% (used 58916 bytes from 327680 bytes)
|
||||
;; Flash: [========= ] 94.2% (used 1605257 bytes from 1703936 bytes)
|
||||
|
||||
;; similar to 4MB_PSRAM_S, but optimized for WROVER-E (chip revision >= 3) that doesn't need any workarounds for PSRAM any more
|
||||
;; tl;dr: its faster on PSRAM. But it will not work on all boards.
|
||||
@@ -2135,8 +2150,8 @@ lib_ignore =
|
||||
IRremoteESP8266 ; use with WLED_DISABLE_INFRARED for faster compilation
|
||||
${common_mm.animartrix_lib_ignore}
|
||||
;; ${common_mm.HUB75_lib_ignore}
|
||||
;; RAM: [== ] 15.7% (used 51340 bytes from 327680 bytes)
|
||||
;; Flash: [======== ] 75.4% (used 1284377 bytes from 1703936 bytes)
|
||||
;; RAM: [== ] 18.2% (used 59608 bytes from 327680 bytes)
|
||||
;; Flash: [========= ] 94.5% (used 1610657 bytes from 1703936 bytes)
|
||||
|
||||
|
||||
# ------------------------------------------------------------------------------
|
||||
|
||||
Reference in New Issue
Block a user